Відео

hi, thank you for your video, i want to remove the visor both sides. In its place, i want to reuse the triangle cover with the 2 screws. Can pls help advise how to pull out the visor metal pole from the triangle cover? thank you so much...

Dang good job! My 2018 sprung a leak. I had initially assumed it was a hose, so i ordered a few different ones. But it seems easy enough to remove everything and check for pressure to see if its the radiator. Thank you for posting, actually gives me some piece of mind on the simplicity of it. Ty!!

Did you need to release the air from the air suspension prior ot doing this job? .

very nice video ! do I need to do wheel alignment after replacing the front strut ?

I purchased salvaged 2017 civic, and am having some issues with the electronics! I had to replace the airbag and had the airbag control module reset! These codes only popped up after removing the airbag module! What could this be?

👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼🧿🧿🧿🧿

MUCHAS GRACIAS CAMPEÓN 💪 THANKS.

Excellent video sir, I'm about to dive into this exact job tomorrow, need to replace the visor on the sunroof of a 15 Bmw X1 , the rail that open and closes it still works, jus the material missing, note this is a single piece boardless visor,just that thin dotted hole vent material Do I need to remove the entire roof too for this job or can I just drop the woodliner? any advice, much appreciated

What’s tools did you use to take it off? Please tell me

Wondering how much you charged for labor? I need this done on my car

I need your assistance! I have a 2011 535i Xdrive when I first purchased from dealership the detail guy there had it for 2 days I go to pick it up the headlight was full of water broke the seal and they wouldn’t replace. My turn signal and daytime lights didn’t work. But high and low beam worked I had rats crawl into my engine chew through wires it was in the shop for 7 months. The driver headlight with issues now no lights work but my right side headlight that has no issues all the lights work but the right side turn signal isn’t working either. The turn signal lights up but idk if it’s a bulb issue or module would I be able to send you pics and u let me know what my options are! Ik for sure I need a new driver headlight but all the lights work on the other and the seals are still good. Is there any more parts I need to order for the headlight then what’s linked below in the description?

Thanks for posting this video. This helped me immensely; I'm removing my seat belts on my 2023 300C to have them redone in a red material by Seat Belt Planet.

Brilliant video. Exactly what I needed to replace both my rear window regulators. My XF was actually a little easier as it was a single piece setup.

What would the torque specs be for the cage as well as the calliper plus name of rotors and pads?

If this is a North American car then it originally comes with a dual stage airbag...what you installed is a single stage European airbag. Hence the error code.

where can you buy a auxiliary battery for c300 4matic?

In my 2017 civic, I removed the passenger seat reconnected it and now the SRS light is on the dashboard. How would I go about removing the light? Is there a way to reset the SRS in the 2017civic?

Thanks for the great video! Is it possible to replace only the turn signal module without removing the entire headlight?

Now how do I put it all back?😂, great video tho thank you

Hey so my question is which 2 out of the 4 wires controls the seat belt pre tensioner ? There is 4 wires 2 are for the seat buckle and 2 are for the pre tensioner ?? Which two are for the pretensioner i want to know because i want to bypass bmw pretensioner resistance too high with a resistor but i need to know where to insert the resistor

No service modes to be messed with in the front ? And why can I not just push the caliper piston in with a C-clamp ?

hi, you need to reset the sensor after installation or it just reset by it self?

I needed to remove a front spindle. Do you know what tools and sizes (in metric) I will need so I know what to bring with me? I already of a pickle fork for the ball joints.

Nice! Thank you for the training!

Excellent video! Thanks for creating it. My roof is leaking, I have the same sunroof. I believe it is coming from the rear corner of the sun roof. Can i get to the sunroof drain without pulling the entire roof liner?

What is the part number for the brake pad sensor. I didnt see it in the description

Can you show how to remove the two small plugs it attach with the hardness on the airbag please

Thanks...great content!

Could I get away with this without removing the fan?

Would that be a good opportunity to drain/replace the front differential oil? It takes about 0.8 liter, spec MB 239.72

thank you for making this video I will embark on moving my headliner when I plan to install my antennas and dash cam wiring.

7:33 The piece your holding, I removed mine to replace the seat belt but the center piece that’s in the middle won’t stay anymore. I try putting it back but slips out

If my battery is completely dead and I open the car with the key. Will the alarm go off?

Do you have to unplug the main battery to change the AUX battery?

Question - If airbag is deployed do you have to replace the module or just the airbag?

Such bull, All you have to do is take the Module to get reflashed and reset for $60-150 depending who is doing it.. No meed to repurchase a $1800 module and then have to marry it to the Vin number again. When they flash the original module all car info including vin stays the same and accident codes go back to blank or OEM. God stuff but thats a lot of work to get to the Airbag module. Nissan Frontier, pull up cup holder, snaps right out and viola, access to module, bolts and harness attached to it.. Thanks for sharing. 🤗 they don't call Dealers Stealers for nothing 😂 Juat subbed and gave it a like as well. Great work 👍🏻

Would I need to change the brake pad sensor if I only need to change the front right brake pad?

Friend question? The same thing applies for the rear breaks and rotors and sensor? What about the parking 🅿️ break which it’s in the rear. Thank you

Great Video! Very thorough & you even explain possible issues. Been a long time since I have replaced brakes on a car & now I have a BMW! I was nervous about it, but you have made it look easy lol! Thank you

Never tighten with a impact driver. You must have a lot of repeat customers. Sucks for them.

I’m just not able to find the clip of the A pillar so difficult to remove, I’m stuck to this part…

Can I ask whatidule controls turning the lights left and right as I drive?

Thanks for your help

Hi great video mate,maybe do you know,i have now 348x30mm rotors i need to replace them,but i checked on realeom site with my car vin numer it’s saying 348x36 rotors,so i confused what rotors to buy???

You never did set this according to the FCA bulletin. Rock the engine forward and back then let it rest 5 minutes. Jacked up trans and let it down the rest 5 min. Jacked up oil pan side then rest, just rocked back forth left and right then let it rest. Torqued rear crossmembe bolt then the nut and bolt to the rear bracket. The next - let it down and torque left and right mounts.

Oops, I made my comment before watching to the end. My apology.

Thanks for the video. With nice calipers like that you could give them a quick clean. You should also use brake grease on back of pads and all metal pieces that touch. No need for thread lock, proper torque is sufficient; you're only making it difficult for the next maintenance. Regards.

Great video, What brakes did you use? I have a 2012 535 and I want to change the brakes and rotors.

I replaced my TPMS for my rear left tire but i cant get the light to go out. Any ideas?

Thanks for explaining the brake wear sensor. Seems pretty straight forward. Gotta get this light off my dash!!