Rear Brake Pads, Rotors & Wear Sensor Replacement BMW 3 series - G20 - (2018-2024)
Вставка
- Опубліковано 11 жов 2023
- Welcome back to our channel! In this video we show you how to remove and replace the rear brakes (rotors pads & brake pad wear sensor) on any BMW 3 seeies G20 320i, 325i, 330i , RWD or xDrive, 2018 to 2024.
Original Parts
- Rear Rotors Part #: 34 20 6 883 979 / 34 20 6 883 980
- Rear Brake Pads Part #: 34 20 6 888 832
Note: This tutorial is provided for informational purposes only. Make sure to consult your vehicle's manual for specific instructions
🚗 Don't forget to like, comment, and subscribe for more helpful DIY automotive tutorials
Instagram: brownsburg.moto...
Tiktok: / brownsburg.motorsports
This is a great video!! Thanks for the great content.
Thank you so much!! Glad the video is helpful!!
Great video, thank you!
Thank you!!!
Thank you for the great video!
You are most welcome! Glad you enjoyed it 😊
Great filming and tutorial..
Thank you!!!
شكرا!
What is the part number for the brake pad sensor. I didnt see it in the description
Great video , the pad sensor message will reset it self or you have to do it?
It will have to be reset with a scanner or I believe there is a hidden menu to reset it from the dashboard!
I have 2019 330i g20 too. Do I must change the rotors too at the same time? or just replace pads are just okay? Thank you
You can just replace the pads! But again that depends on the condition of your rotors if they have groove or a deep edge I would recommend replacing them!
@@brownsburg.motorsports thank you for replying my comment! Have a great one!
Sir Could you please provide the list of tools I need for brake change?
Is there one or two brake sensors for the rear that need to be replaced for a 330i? Thank you
One on the rear passenger and one on the front driver that’s all!
How do you retract the auto break?
You will need an OBD2 Scanner that has “hot functions” or “Service” functions
How to do this job without putting brake parking in service mode
Unfortunately there is no way of doing this without putting the brakes in service mode
Incorrect, there is a manual method. You can remove the EPB MODULE and use a tool ..I think it's T30...and rotate it by hand clockwise until it stops. There are other videos showing how.