Відео

Can you provide the link for RS 457 pads which is priced at 3400?

@@prakashsuraj6495not able to add the link it’s in the motomodz website

I am not able to see that on the website

@@prakashsuraj6495 have shared you on Instagram

Have shared you on Instagram

I am using normal petrol only

www.amazon.in/Tail-Tidy-Aprilia-RS457-SKYDD/dp/B0DGF1DXPJ

@prakashsuraj6495 Thank you sir and also plz provide me the link of spools and paddock stand for Rs457.

amzn.in/d/bMuULz3

amzn.in/d/do5QQl3

Thank you sir so much.

Yes, these are genuine brembo brake pads.

Rear suspension can also be repaired, check if you can get it repaired till the time you don't get a new one.

Hey, thank you for you valuable suggestions. Your concern is genuine. At that time I did not have any option neither I have time to explore options. I had to get my bike back on the road. All your suggestions will definable be helpful for the future and for the felow owners😊

Why mr 2101?? Do u really think mechanic made damage.? Oil and oil seal needs to be replaced every year or two irrespective of ryding. The point here is, the inner tube and fork spring in it alreday damaged before repairing, he had ridden the bike after the damage , which he shouldn't. The fun part is that, due to the damge, the second fork had to do both rebound and compression, for the entire bike, it is going fail later. All this happend due to ryder error, he should have fixed asap., because of his single bike garage he didnt do it that is a mistake. Now he had to replace both forks inner tube and spring also. Im surprised the Dealer didnt ask him to replace both the forks!!! I can understand the ryder is new to this experience, usually parts are delayed and expensive it is part and parcel of motorcycling experience. Im even surprised owning 4.5lack bike, but couldnt change forks!!! Pardon me 👃. The mechanic didnt do anything wrong here, usually it is carried out like this may be he could have added a cloth in between. You're paying less and expect first class quality experience!!!!!! Wow!!! You should criticise the ryder not the mechanic friend. Nothing aginst anyone its my personal experience , you can google or youtube it out , tell me im wrong. As long as the ryder wont experience any handling issues its ok, but an enthusiast point it No.

Umm it depends upon the rider whether he wants a full replacement or not. And its a very bad way to point out that owning such a motorcycle and not spending a certain sum of amount for maintenance. People have other things to do with money than only to ride a bike. I bet you ride ducati v4s daily to work!! ​@@sojanmonms

@@sojanmonms Bhai yaha pe mechanic ne damage kiya ya nai kiya is cheez ki baat he nai chalri hai. What I was trying to say is crome plated rods and tubes ko aise directly vice me nahi pakadte hai. Usko either kapde se lipat ke karte hai ya aur ek mechanic ki help leke karte hai. Mai mechanical industry se hu. Humne hardchroe plating kar ke li hai pehle. Toh handling se jo problem ho sakti hai wo maine bataya.🤷

Hi apurv,100% sahi hi, about chrome plating tube, but what i meant by handling is the front end damping feeling of the bike, because there is no proper compression and rebound the spring takes the excessive stress due to this bend could have happened . I never meant by the way the mechanic handling , but i meant handling by front end feeling with the chasis. What ever u said about the tubes u have had the experience and u r right, i didnt have any experience with that regard. Pardon me on writing in english, hindi is my second language it is easier to type in english rather than hindi

The yellow dots are part of Quality Check process where after QC is done yellow marks are done on the parts that are ok, post which motorcycle gets assembled

I know fork protectors are available, but in my case the fork protectors wouldn't have save the oil seal, as it got damaged because of excessive pressures, like riding on the speed bumps or pot holes etc

@@RecluseRider Understood now. Thank you.

There is no official number mentioned for the fork oil volume

@prakashsuraj6495 it will be mentioned on the service manual owned by the svc, wrong volume will impact ride and wear on other parts..

After replacement is the travel uniform on both sides ? Is there any pull towards any side ? ​@@prakashsuraj6495

Not sure

@prakashsuraj6495 coz yamaha fz is also 41mm fork!

​@@abhirkonvict1fz has usd ? didn't fz come with telescopic fork ?

😂😂

@cableguy6843 The software comes with the bike when purchased from the dealership. They ask you to install the app and show you how the apps features work. Not sure how it is in the US. Aprilia USA's website has that as an accessory its called the APRILIA MIA MULTIMEDIA PLATFORM PMP 3.0 Note- pasted my reply once again, since this was your last comment.

Chla ja bhai tere jaise subscribers ki need bhi ni h😂😂😂 btw uske beti hui h parental leave m tere jaise insan ko reply dega kya😂😂

Hey its definable not a good experience for you, I try my best to keep up with youtube and my work. Could you please post your question here.

@@prakashsuraj6495we are here for u!

Its better not to disturb the other suspension until it leaks

It's better to change for both. Now it will be again uneven and again oil leak will happen

@ yes true

I know fork seal covers are available, but my seal leaked due to excessive pressure, like riding fast on speed bumps or pot holes regularly

Might

Actually all bikes comes with dust seal .... no need such but for peace of find you can install fork cover .... anyways in this case may be it was a faulty oil seal from factory itself ....and some speed bump or pothole started oil leak

Thanks for the replies. I bought a fork seal cover and installed it on my 457 a few minutes back.

In my scenario the additional fork seal cover wouldn't have saved the oil seal. The seal leaked because of excessive pressure, while riding on potholes and speed bumps regularly

Yeah, will get that soon

i got full new front shocker

No, this is a ware and tare part for which you don't get warranty, warranty is for manufacturing defects.

Fitting, oil , labour 😅

@Rockstar_london labour would have been 500 max and the fork oil is 120 rupee can and that seal costs 300-500

@@anonymousryuk6273 for two forks , use a calculator

Max Price Should have been 1000 Rs ...agree this way overpriced for aftermarket job ...

​​@@anonymousryuk6273no. 500 for labour, 700 for 2 oil seal (yes usd has 2 oil seals , atleast ktms have it) , 300- 400 for good brand fork oil. They are charging 400-500 extra because "Aprillia" + the part is secret ( all same diameter usd forks have same oil seal)

its a naked version of rs457? right?

Not sure yet, will have to see after its launched