Відео

When you're cutting and adding male and female connectors, do you have to use electrical tape to prevent water problems?

Why is my Google maps image of my roof so blurry and his is super clean?

When you connected the male and female at the beginning..I noticed you didn’t worry about polarity. Does it not matter if you are running c9 LED?

My kit only came with side female plugs. Is that different than inline?

Excellent video! This will be my first year doing this and I feel more confident now after watching your video.

Thank you guys and great job Memphis! Love God, love others, and let your good deeds shine out for all to see, so that everyone will praise your Heavenly Father :)

Do you have to be tied off when getting on the roof to abide by osha standards?

What length of this illumination?

Is there program to show a design to a customer in the proposal process?

Smart

So I have c9 led lights but they are 3 wire and I have vampire plugs but is there a way to just use two of the 3 wires I did use a voltage detector and found the two wires with power but I read online I can’t use vampire plugs with the 3 wire lights but even my regular led Philips lights are 3 wire.

I got my lights from you and installed them with my two sons. We followed your instructions and it turned out perfect! Thank you!

I recently bought a 60’ set from this company for my home. I had never put up Christmas lights before. The items arrived in a couple of days, and following the advice in this video, I was able to put everything up myself and it looks phenomenal! My wife is ecstatic with the result and my sister in law said it looks like a professional put them up. Looking forward to buying more and adding to my house in the future!

I didn't see it in the video and apologies if I missed it but what do you use to make the jumpers between the dormers?

My step is 10 feet.

Very informative. Question.. I have a garage that is separated from the house and is essentially your yellow section 1. How would you outline the garage? Would you still start at bottom right and go up, across the top left, and then down.. would you continue the same line and go right across the gutter line to where you started? Or would you still do 2 separate lines?

Thank u so much❤

Do you guys typically only do one side of the house? Thanks.

Are these particular lights 12" or 15" spacing?

What spacing were the lights you used im sure u mentioned but didnt catch that

What are the typical months to install lights? Where I live early-mid November it’s windy and stormy. Is it better to start early and get them up for people or tough it out in those cold dark months?

What software are you using to show edit the string lines?

Fantastic educ video. Thx for a straight forward approach. Love the money shot comment 🙂

Great video!

Hello lawn n light Quick question when installing vampire female and male plugs Is there a specific Way to feed it in? Like the side with the writing on the wire can be fed any way? Thank you

Best video on UA-cam!!! Greta job!

Hey Shane, thanks again for another great video! I have one question about those male and female connectors. Thank you for detailing that for the inline female type connection, polarity is important and we want to align the big plug slot pin with the wire that has writing. Pardon my ignorance but...does it also matter when we are installing male connectors that we also note the polarity and install accordingly?

Shane, I have seen some homes in my neighborhood with ridge peak specific light clips. They have two legs that extend out and hook around either end of the first shingle off the peak. Do you guys sell those?

Thank you, Brother Shane for a wonderful, wonderful and inspiring video. I have been wanting to light the exterior of my house for years but the professionals in my area are prohibitively expensive. This video and many of your other videos have given me the courage to do my own house for the first time this year. I have a two story house with a mansard roof which presents some unique challenges. Not the least of which is that I don't own a ladder tall enough to reach the top. It never occurred to me that I could rent one! Sure enough the home improvement stores in my area rent them very reasonably! Thank you very, very much for mentioning rental ladders!

Nice set up

When you end with a female to cap off the line do you need to wrap it up with anything to prevent water from getting in?

I don't see the magnetic clips on your website, where do you buy them from ?

Still waiting for that socket replacement video

Can you put in an inline female on roofline lights at any given spot and run a wire to a power outlet?

I think he hit most of the nails right on the head except for two I would not buy a commercial mower without the grease points and it only takes me a few minutes to level my scag deck My reasons for the grease points is a properly greased bearing runs at least 100° cooler than a sealed bearing

which bran of clips do you recommend and where do you buy?

@lawn&light - how do you keep track of your holiday light inventory? Do you use a software, if so which one?

Great information!

Any tips on putting c9 bulbs around a double car garage door? The House is hardie board so no vinyl to use that sort of clip...

Dude thank you for the comedy comparison. I sell roofs as a job and I always make this comparison and I get weird looks sometimes because people don’t get it but you gotta run that sales set over and over until it’s sharp

I’ve started my business this year and I’m getting into Christmas lights installation, I was wondering how do you get all of them to light up if you cut them? Is kinda hard to explain but I hope you understand what I’m talking about

If I had roughly 380ft of linear feet of lights I am wanting on my house will I still be able to use just one plug? @lawnandlight

Where can I get the same shingle clips?

I actually started putting up lights outside since last year and with your video, it'll make things not only way easier to handle them but to make sure that it looks good without needing to nail in some unnecessary hangers and whatnot. Thank you! ❤

I bought multiple strands of incandescent c9 lights which only can connect 2 strands. If i switch the bulbs with LED bulbs, would I be able to use those stands and connect more than 2? Basically switching from incandescent to LED.

How to price out trees? $30 a foot?

I'm sure you are good at what you do. But this is a very generic video and very impersonal from the customer standpoint. But maybe that's how things are where you are located at. It's hard to believe that people would pay top dollar for just outlining their roof I've done very high on custom Christmas decorations for years, every home. Or commercial building is custom designed for each client, including all the trees and the reeds. Our handmade, what's the directions? I handmade on them and the lights are done in very customized configurations.. To do one location will take either one full day and night or two full days at night with a crew of 5 to 7 people working nonstop.. Plus a lot of preliminary design and shopping and making things and putting things together. But I do wish you well in your business. I'm sure if you offer more. Customize creative options. You would make a lot more money, but you have to have a very reliable staff

Does it matter how many lights (jumpers) are connected into one power source? I used home depot/lowes c9 lights and it only let you connect 2 strands of lights to one power source. Thanks!

Hey man I’m having trouble understanding how you connect the dormers to the perimeter lights. I think I’m understanding that you connect an extension into the middle of the lights but I’m not 100% sure on that. Hopefully you see this and help me out. Thanks and I really appreciate your videos

why dont you measure with google earth its way easier to look at the building from all sides