Відео

Great stuff!! I’ve been wanting to do this with my car, but I think I need to get the inverter you’re using to handle our 120 V air conditioner. I tried it during a recent hurricane, and it wouldn’t quite kick the compressor on. Question, did you do a video where you wired up that generator port? I assumed if I tied a generator plug into a 20 amp circuit breaker, it would only power every other breaker since it’s only 1 pole. And I couldn’t find a two pole inverter that would work with the Bolted in a different direction direction direction This would be a game changer. Let me know if you get a moment… And thanks again for your contact and help! Watching again, it looks as though the adapter you used enabled to this. Could you provide me a link?

Respect!

I saw a few hot spots on the flywheel, would you replace it if you were doing the job again?

what does this do to the ride without the trailer?

Thanks, great job. I am only using the hitch for a bike rack so I did not need to do the brake controller thingy but I must applaud you Further because your video is so quick. I actually had to slow down the playback speed which is so rare, most of the time we have to speed up the playback speed because the guys talk too damn much. So thank you.!

I appreciate those who post videos though I am usually also critiquing them. Your video was spot on, to the point, perfectly filmed and just all around incredible. Thank you for posting one of the best tutorials I’ve ever seen.

Hello, Great video. Did this unit come pre-charged with refrigerant? I thought the non-diy units did not come with refrigerant. I am only asking because I bought the same exact unit, but in the 12k btu (smaller unit), and I am not sure if this thing has refrigerant inside of it. I called mr. cool support line and they DID say it does not come pre-charged. Can you help clarify this for me please?

Sorry if you answered this, what trailer is that

How come the tranny does not need a gasket?

How long did it took to drop the transmission?

Good project. The only suggestion I have for you is to add an air filter on the inlet for the inverter box.

I must find that pedestrian noise switch video! They should sell/give custom noises. Obviously there'd have to be a vetting/whitelist process. But wouldn't it be cool to have one that sounds like a tie fighter, or the TARDIS? Aw kitty! I got a bidet years and years ago. Was laughing through the great TP shortage of the Trump presidency :D Originally a Tushy brand, was a kickstarter of it. Now a slightly better one. No hot water or blow dryer, but they're not necessary for me. When my Bolt finally dies, or gets replaced, I wanna drop the battery out of it and use it for home power storage. That'll either need a neat kit from somewhere, or for me to get an electrical engineering degree though.

Cool video. Texas and I don't get along. Been through there 3 times, and stayed once for 6 months for work. Been pulled over 7 times, 6 of them right after crossing the border. They really don't like CO plates I guess. Or maybe it was the 'Rocky Mountain High' bumper sticker. Last time I left I may have been speeding a little. Did you know a 1993 Impreza could go 125mph? :D Love the hair. But there was a Wendy's there, they're yummy. Luckily I've never had that much trouble fast charging, but I only do it a couple times a year. Biggest trip was Denver to Des Moines, 'Beverly' made it just fine. Going up the mountains is a blast though. Especially coming back down and getting 9mi/kWh :D I need to get a hitch for my Bolt. Oh yeah Bolts can use Tesla chargers now... if you get the $265 adapter. //or find a magic dock. I generally only end up charging when it's below freezing, and sometimes well below 0; I've never gotten over 40kW in. Around here there are Electrified Walmarts, but also Targets and most of the 7-11s have chargers too. Plus Tesla is all over. Should add a price per mile to that overview screen. Last time I did the math DCFS was nearly as pricey as gasoline in my old Subaru, with a trailer bringing down the efficiency I bet it's on par with gas. Gas was much cheaper then though. 7.8 cents per mile at that Tesla charger. My 'Roo was about 12-15c per mile, so still better than gas yay. Yeah, DFW is scary to drive in. I got there right as monsoon season hit. I don't mind the heat in CO, but heat + humidity bout ended me.

What is the weight of your teardrop?

What was you average mph driving speed between the legs?

Very good tutorial. I wish all tutos would be as good.

excelente tutorial me ayudo mucho muy bien explicado gracias

Super helpful! Gave me a great template to work with. Thank you!

Great video. Exactly what I'm trying to do. There should be a site out there to buy kits to do things like this.

Hi, I am an HVAC installer and I skip the nitrogen step as well. The customer doesn't know what the heck I'm doing anyway.

Which kit # did you use for the Bolt EUV?

Video is great thank you.. But vacuum. House and connections all together cost more that the machine rental ??

Fantastic DIY. Thank you for sharing.

good job thanks

How is the inverter holding up over time? I've seen temperatures under the hood of my EUV reach 165f when fast charging, that can't be great for the inverter long term. If it's not an issue under the hood seems like the most convenient place by far!

You made allot of mistakes - I just didn’t find any to tell you 😊. Nice job.

Wonder how far this shoots the insulation. Might not work in an attic

So ingenious… thanks a bunch for this!

What raintight connector is being used to connect your emt to the liquidtight?

Cat distribution system at work.

Vrry cool adventure. Someday these trips will be too easy & boring.

Is a box necessary? Can you just mount it under the hood or is it to prevent it from getting wet?

I have a noise coming from my rear passenger wheel only while turning right you think it might be my rear wheel bearing???

Do you know what your hitch weight was? Looks like you got a lot of stuff on the hitch. Also, what’s the hitch limit for the bolt?

About to tackle 1. Ty for the upload

Where is the housing?I can't find it on my car.I know this sounds stupid but i've done everything up until that

Thanks you boss .❤❤❤❤❤

So you spent $90 and four hours work to save $30?

That was a pro install. Thanks for sharing your knowledge. I got the DIY version but will opt for the non DIY for the other rooms. Thanks

That's some backwards redneck genius shit...... Good job giving me some ideas🎉

😂" jack stands that haven't been recalled"

Just why

Thank you for posting this video. We used this technique this weekend, including the car wash sponge (excellent) and this worked perfectly. Thank you!

LMAO!!!!

Interesting and enjoyable. Love the little bits of humor.

I inadvertently purchased the non diy Mr cool version of my mini split. Thank You for your very comprehensive installation video. I will definitely be referring back to your video when I begin the installation of my unit. Again, Thank You!

THANKS

Extremely helpful! Thank you 😊.

There’s always that one person that makes you reevaluate your skill set and cleverness. Great job and excellent video skills. How’s the temp working out for the inverter so far?

Once finished you get an engineering degree from MIT.