Відео

Im pretty sure but double check when buying

@@Rowow when will you do videos with it?

@@casade2831 busy with my excavator currently. Once I get that done ill bring the spray foam trailer to my shipping container to spray it for a mushroom fruiting chamber. I like to say soon but idk. Always busy sadly. But it works good. Had a issue with a gauge, was a pain replacing it as the brass broke off so I had to take out the entire manifold. But otherwise im happy with it.

@@Rowow can’t wait to see that!! 👍👍

I think you mean the glow plugs and push rods

great question but sadly I havent set that up so im not sure. If I set up THC ill make a video on it though

👍

cracked corn. Its sold at farmers store as animal feed

@@Rowow Most people seem to use popcorn. Would be great to see a test between cracked corn and whole krenel. I think that a mix would be best, the cracked corn helping to make nutrient more easily available and at the same time reducing inter-kernel spacing, I think the large gaps between whole kernels seem to cause slow coverage of the mycellium. Thoughts?

Plus a monitor, keyboard, mouse. If you can find a PC locally and are willing to waste 1-2 hours driving to and from to pick it up. And dealing with damage and other issues, most likely needing to buy a SSD to replace the failing harddrive, or ram/etc thats causing issues for the PC to boot

Start your own shop. Ez

im more than willing to charge $100 a hour for fabrication work. I simply cant unless I hire my own employee.

Bailouts of corporations called "too big to fail" which were failing due to the captalistic free market and poor buisness choices such as choosing college buisness degrees over actual engineers as CEO's of these companies. it seems insignificant but it has a giant trickle down effect. That company choose bad suppliers who do the same thing and those suppliers have the same bad suppliers etc etc. Bail out these companies and their suppliers multiple times over many decades and that results in the broken system today where they have a monopoly to charge whatever they want and pay their workers whatever they want

Definitely agree it should be more. But mostly talking about all the people online complaining about making $25

I make 13 dollars an hour working 50 hours a week and I don't get paid overtime. Sincerely, shut up.

And the shop I work at charges 85 an hour. We do everything from tire changes to engine and tranny swaps. No cab off work that crap is for the birds. I'm about to demand 16 an hour because they will never find a more reliable employee than me. It's also a salvage yard and my boss will sell me stuff dirt cheap so thats a huge plus. And I get paid cash fck taxes 😂

Starting a business is very hard to do as well. Over 50% fail in the first three years and end up worse off than before in a lot of cases. Not everyone is cut out to run a business, myself included. It's a lot of stress.

@@RejectReality97 if you can't handle it then don't complain. Otherwise find new companies and keep demanding raises. Don't sit back and cry on the Internet

not for my model

Used mower blade with a angle grinder and a drill.

made the plasma cutter myself. Biggest investment was time which I regret. Lots of cheap used ones for sale which I would had done instead next time and fix/upgrade it to my needs

Definetly will! always wanted unlimited honey for hams, mead, etc. Been pushing it year after year but got tired of being busy every season and missing it so I took the first chance I got this year

@@Rowow o7

I really doubt its actually from the engine. I suggest buying a automotive Stethoscope. They sell it at harbor freight, auto zone, amazon, etc. and probing around the engine to figure out exactly where its coming from. Most likely something is hitting against the fan is my guess. Ive seen some really random/unpredictable things to cause stuff like that.

Original listing is gone. But look up 5hp outboard on there. Lots of listings mostly the same Chinese brand

As for problems it runs good but I haven't used it much. Started it a month ago, was filled with water from being outside for a year. Removed the spark plug to purge the water, and it immediately started back up

Being salt water, how has it held up to rust

See updated shorts

I'm surprised the plasma doesn't interfere with the radio signal of esp32! Why not?!

wifi has much better error correcting than USB. Also all of the code is computed and ran on the board itself. The only time important data is transferred is before you run the machine, aka when the plasma is off. It stores the file on a SD card on board and computes it from there

@@Rowow my arduino is located very close to a 1990s xp laptop. It has a whopping 512k of memory but still boots xp faster than others boot win7,8,10 !

@@Rowow that makes sense. Wifi only for transmitting the gcode beforehand. So its just motor wires out? What motor controller chip? Do you have limit switches?

@@TheRainHarvester You can add motor controller chips similar to a 3d printer board however it has the option which I use for external stepper motor drivers. I dont use limit switches as its alot easier to zero the machine to the workpiece

yes ive tried shielding the cable, computer, laptop, etc. Even used sheet metal trying some faraday shield. And it helps alot, but I noticed glitches and issues even without running the plasma cutter. I first used grbl on my very first cnc mill and there was random times it would move and not stop. Again no plasma cutting was done with that, or any other interferance. Simple movements and other random things causes unreliability, which any type is too much for a CNC machine. Cutting tools can easily cost hundreths of dollars, and the parts you are cutting can cost much more especially with lots of time and effort to cut it just to lose it all midway. FluidNC is simply much better in every way.

@@Rowow that's very strange to me because i use grbl exclusively for many years with no problems. The only problem i ever had was with the limit switches. The magnetic router induced current in the gpio wires to the switch and caused false limit switch presses. I fixed it easily by adding a 10uF capacitor at the switch (not near the arduino). It works flawless. I wonder what the difference between your setup and mine is?! I have the arduino uno 3' away from the cnc. Only the limit switches and stepper motor cables go to the cnc.

@@TheRainHarvester I was using a laptop and maybe it wasnt properly grounded. But control over USB is annoying. You still need another computer. Much better to have the code stored and ran on the board itself. When you have many cnc machines it makes operating them so much easier. I can run them anywhere I want to from any device. simply need to change the IP to swap between them. the only time I dont suggest it is for high precision machining where a MPG controller is needed and especially for lathe indexing for threading

@@Rowow yeah it's s good at strategy. Does fluid nc still have emergency stop/pause button? Can you still broadcast a move request while the machine is cutting? Or does wifi get interference ? What is the issue with lathe thread indexing on fluid nc?

@@TheRainHarvester yes and you can wire a switch to it cause obviously WiFi may time out or whatever