Відео

You can achieve 32 bit float audio, recording internally if you use an external mic

why they not lett you change in the Dji app ,bt device and not allow to change to 32 bit ,very arrogant bad company! i wanted this mic and enough to me one ,but find someone to change the settings who has the receiver or dji store beg for it if your country has dji store!

Excellent video.I love the way you called out DJI on this one.Yes they have great products and alot of B.S. Also.They hate to tell you that you need two Mics to record stereo.Thats more money for them.DJI is slick.You must keep your guard up with them.Keep up the good work.

Need a shirt that says, "I Believe in the Tripod" ✌

My website doesn't have 8 gigabit

I still have my HH3000 with a 1.5G plan, still waiting on the best router that I can plug my SFP directly into. I have that HH3k/4k always leave wifi radios on even if you disable wifi

That's a tuff one bud! Specially for a new UA-camr! My answer would be no for the intro at this point on ur channel. Why because I have other tech tubers could be 2-4 that I would go to first to get there review before I would go to another channel. So at that point I would skip the intro to get to the review and ur final thoughts. Hope that makes sense

i got action 4, bye bye

Hi, Could you please explain the full set up again ? why do we need QNAP QSW-308-1C 10GbE Switch if connecting Bell giga hub directly with AX89X? I am a bit confused on that part. Please help.

"Make deal with Jesus" i love it ! 😅 great video !

Hi! Great video. I just got Bell 1.5 Fibre and wondering without a proper bridge mode, what is the most straight forward way to get good wifi around the house and connect an iptv box, ps5 and still use Fibe TV. Would the solution just be to get 1 or 2 of those Asus routers? Or get something like a TP-Link Deco etc. Mainly just on zoom for work, ps5 gaming and general heavy browsing and streaming? Thanks! Had a frustrating day with Bell on my installation day

Only issue I have with GigaHub is when I put PS5 wired into Advanced DMZ once I wake PS5 from rest mode no internet until I unplug ethernet from GigaHub and plug back in then Internet works on PS5. It's gives my PS5 the GIGAHUB IP

Third party lenses with adapters have a hard time focusing

I found some information that if you plug a mic the 32bit is activated without rx but would like to know before buying luckily you made this video🎉🎉🎉🎉

Does it stay in 32 bit float or it reverts back to the default?

You know your stuff! Can I ask something... I'm trying to get better connection to a sunroof ... But.. I'll have to go wireless .. Have tried Eero 6 and a 6gig WiFi extender bt tp-link... I'm working with a HH 3000 from bell ... Any ideas? Thanks for the channel you do a great job!

Use a pc running pfsense or opnsense already 😅

As of Feb 2025, they have to allow others to use their fiber network. Also, use an opnsense box as a router.

Beanfield does it for 90$. Bell can do 75$/month for 8gb for 2 years. You need to find a sales person and haggle

I love the mic and I love your critique over it! Excellent first video of me watching from you 🙏

Ask someone with a Pocket 3 to connect it and switch it on? Seems odd I agree,

DJI: Don’t worry about guys like this. Just ignore him. 🇨🇦

Did a firmware not assist this issue?

I've been with Bell since 2007 when I moved into my brand new / new build home. At that time Bell's fastest service was 15 mb/s and that was painfully slow. When they offered 100Mb/s I switched over and that was a little more tolerable. When Bell announced Fiber 1 Gb internet many years ago I got super excited and started planning how to wire my home to take advantage of that service. I had an electrician wire many CAT8 cables throughout and I purchased many 10 Gb switches. The wait was very long and I saw Rogers tunneling Fiber into my neighborhood but I stuck with Bell and their 100 Mbp/s speed. It was only last year when they had their contractors started digging and tunnelling Fiber wires into my neighborhood. When that happened I went out and upgraded my home routers to 2 ASUS GT-BE98 Pro because it supported 10Gb speeds and Wifi7. I also built a new Synology NAS 8 Bay unit and stuffed it with eight 22 TB drives (2 drive fault tolerance) and installed the OEM 10Gbe network card. I was all set, then by the time the contractors got to my home, Bell decreased their offering from 8Gb/s to 3Gb/s. The technician said I was the first one to sign up for this service in my neighborhood and the main panel which is housed just outside my area has a switch that he could flip to change my speed to 8Gb/s. He said there is no way he was allowed to give me that speed and I would have to call Bell to see if I can have that service. He also said that other neighborhoods where customers already had 8 GB/s were allowed to keep that speed and were "grandfathered" as long as they kept that service. This was all last year, I'll try to call them again soon and see if I can negotiate for them to upgrade my speed to 8Gb/s, I do not mind to pay for the extra cost.

Btw since then homehub 4000 has bridge mode is simple as holding down 2 buttons at the same time for 8 seconds.

I came across your video, knowing nothing about the 24bit, 32bit, I just did the firmware update v04.05.01.11 for the DJI Mic2, I purchased for my pocket 3, In my Action 4, wireless mic options there is a option 32bit, does this work?

Hoping someone here can help me out… Just signed up with ebox fibe internet and was provided with a Nokia ONT XS-010X-Q and Nokia Beacon 2 router. I’m trying to use my nest wifi router and access points instead of the beacon but not having any luck. Has anyone been able to do this? Thanks in advance!

Great video but please latency = speed and bandwidth = capacity. Fibre has low speed and high capacity… you are a great educator so please use the right terms IMO.

8 gigabit? bro must be torrenting

Thanks for the video. Rogers is keep giving me deals but sorry bud you don’t even offer symmetrical internet. I work from home with large CAD files and your up speed is not going to work.

Your Polkaroo hoodie is awesome. Now I need a Friendly Giant silkscreen t-shirt. heh. Work for TVO? Honestly, Blackmagic Resolve is where things are now. Hone your skills on that and grab the views. You may love FCP, but they'll never recover from imploding their fanbase when they killed Studio and frankly, they lost the plot (I'm a Flame editor so I know what's it's like to use a system nobody cares about). Also, I skip cutty intros. as I see/make them way too much. Give me an Egoyan film with 10 cuts in the whole thing any day. heh. I subbed your channel 'cause why not right? :). Also, for your metrics, I found your channel as I'm tired of Rogers screwing up my connection and fibre is beckoning. Your channel looks interesting. I watched your video on loop haha. Algorithm will think this video is gold.

Hello, I think a very important point that will help you improve the views and performance of your channel are the Thumbnails, I will tell you my little experience on UA-cam. On my channel when I barely had 300 followers with a single video I went to 2 thousand followers and more than 200 thousand views. After that I had good numbers of 20 thousand views, and then the videos fell again. Researching too much daily I realized how important miniatures are. In fact, if we analyze it in more detail, it is the cover of what we are going to see, if it does not attract, if there are no contrasting colors, if there are no facial expressions that generate emotions to the viewer. All the effort dedicated to the creation and editing of the video was in vain. There are even miniature designers, it’s a world that I didn’t even know existed. Right now I’m finishing a Matte painting course that is the same technique used by the best UA-cam content creators to create their thumbnails. I will leave you this phrase that I heard and I could try on my channel “A bad miniature can sink a video and never be found again” in reverse “A good miniature can make a very bad video viral.” I use a translator because I speak Spanish. Greetings

I sometimes skip intros when I intend to watch the entire video. I didn't realize UA-cam penalized creators for that. Knowing that, I will just watch intros :)

Glad I got to keep my 8gb

I will watch the whole video with the intro.

I've only just seen this on my feed as a stranger to your channel and was pretty hooked by the idea of a genuine player at odds with a inconsistent game. Firstly, I wonder if its your subscribers skipping the first 30 seconds because they know they want to see the meat of the content and your personable appeal. Second, I can only think (based on one other comment I glanced) that as your thumbnail can accomplish a lot, maybe the digest could be even shorter and/or more teasing and provocative for the mind, begging watchers to find out more with even less info set out. But I cant personally find fault with them. MAYBE trying full screen consistently in intro would help for people watching on a phone..

I like videos with substance as long as it's a topic I am interested in boss

I'm not a follower of your channel, just popped randomly, your intros are way too long and a little tasteless, if I encounter a intro like that I probably skip the video entirely.

Intros are stupid and I rarely watch them. There’s one UA-camr that does “intros” that I always watch, but he likes to do little skits at the beginning with a character he created and they’re usually hilarious. Ninjon is the creator and his channel is all about miniature painting. But I’m also a guy that generally watches all videos at double speed, because many creators pad their time generally by posting at 0.75x speed… anyone else notice that? Anyway, this video is what I would call a good intro. Not sure why it was in my feed but it got my attention and I clicked and watched the whole thing… at 2x speed 😅

I like straight to the point videos . I hate like ,five ,six minutes in and the creator doesn't get to the point . I skip ahead or just click off .

As a viewer, I need an intro. it helps me to decide if i want to continue watching the video (will it answer my question) or not (search for something else). It should be fast and straight to the point.. doesn't need to be heavily edited, 10 seconds max bullet points with a hock snippet will be fine.

It just depends on what you have on your channel

intro with a very quick (30s-45s) overview or about the key points (hook) is fine. Personally I'd prefer it to be short and not too many effects. If it is a short video then intro is not needed. Take LTT or dave2d for example

I think... since you're not camera shy, that including your face in the first few seconds of the intro makes all the difference. Why show face? The intros you've shown here feel like they're hyping up something, but it's not really hype that people need - people want a story. The entirety of this video itself is a story.

Even having feedback won't help as much. The thing is UA-cam doesn't actually know why someone watches any video. For example, If an intro looks visually nice but I can't stand the creators voice or looks. Then I click away. UA-cam doesn't know that part. They only know I clicked away. Also, listening to the UA-cam guru's tell you what works doesn't account for survivorship bias. They can only tell you what has worked for them. If they actually knew what works for everyone then they would solve everybody's problem. Some people will be winners and some will be losers. That's how life works. I would say if you keep worrying about numbers then it's going to clog your head up with assumptions you can't control. As of this comment, this video is at 143 views. Put half of those people in a room and that's a lot of people you could help. I'm not a regular viewer of this channel. I only clicked because I understand the frustration as a content creator. I wanted to hear your perceptive. So even though I was shown the video. I more then likely won't watch your other videos. I checked the channel and the videos just don't seem interesting to me. No offense to what you make. Good luck on your journey.

Why I made this video: I’m the creator of this content and unfortunately, being objective about what YOU the audience wants is harder for me. From all the responses I’ve been getting, I wanted to send an additional thank you to you all. This is definitely giving me better insight than some POS graph in the analytics tab that doesn’t come for 2 days. #ImNotAngryISwear

Intros are outdated. Intro information can be communicated in the thumbnail and video title. If you watch the big guys, their intros are usually clickbaiting with bold, shocking statements. Those intros aren't giving you information on what the video is, but instead, they push a preconceived opinion and then challenge that opinion in the video.

5 minutes in and I still don't have any idea what help you want. You're kind creating your own answer here. The intro on the Mac video looked nice, perhaps less polished but it makes it clear up front why the hell I need to watch. :)

I'd skip that intro for the same reason I wouldn't want to watch a movie trailer before I watched the movie. I've already watched a couple of your videos though and know I find you easy to watch - the intros are mostly for folks that aren't sure what to expect from you. Check out how Wendel does his lead ins for Level1Techs, he manages to convey his personality and expertise by simply summarizing his personal motivations for why he wanted to make the video rather than going over what he's going to cover. tldr; The intro is your chance to convince us you're worth listening to, the title and thumbnail already did it's work telling us about the topic.

Your intro is CBC quality for a long form video. Many UA-camrs verbally tease their topic, do a short stock Intro, then start their video. I judge videos based on if they address the thumbnail and video title. Flashy intros like the ones you did are nice, but not what I expect. Hope this helps.