Fantastic Quack
Fantastic Quack
  • 74
  • 1 756 835
Hot Air Soldering Station Review! Atten ST-862D
I finally got my hands on a hot air station after frequent mentions wishing I had one in previous videos--where I've wrestled with flip-chip, BGA, and various other tough SMD components. Will it actually make my repairs easier? Let's find out together!
Atten ST-862D:
‣ amzn.to/3TC3qdQ
Storefront:
‣ www.amazon.com/shop/fantasticquack
Where possible, linked products are affiliated (which means I get a small commission if you buy from them). Thank you for supporting the channel!
#review #product #atten #soldering #hotairgun
Переглядів: 1 434

Відео

Nintendo NES Top Loader | No Power Fix (NES-101)
Переглядів 5984 місяці тому
In this video we troubleshoot and repair a Nintendo top loader NES-101 that won’t power on. Parts diagnosed include the power switch, capacitors, voltage regulator, and bridge rectifier. I’m glad we could save this NES and I hope the video helps you out, cheers! Storefront: ‣ www.amazon.com/shop/fantasticquack Tools/materials that I used in this video: ‣ Screwdriver Kit: amzn.to/3OWja76 ‣ Compr...
Gameboy Advance SP Not Charging Fix | Charge Port and EM8 Filter
Переглядів 2,1 тис.5 місяців тому
In this video we repair a GBA SP (AGS-001) that will not charge. The charging port was obviously bad, but there was an additional problem with the EM8 filter chip, so here we will replace both of these components. Stay tuned to see the fix! Storefront: ‣ www.amazon.com/shop/fantasticquack Tools/materials that I used in this video: ‣ Microscope: amzn.to/3RrMKUJ ‣ Screwdriver Kit: amzn.to/3OWja76...
Fixing a PS2 with a Broken ("Glitchy") Display
Переглядів 4,3 тис.5 місяців тому
In this video we repair a PS2 Fat (Phat) with bad/broken video output. The video just looks glitchy and distorted but the audio was working fine. Stay tuned to see the fix! Storefront: ‣ www.amazon.com/shop/fantasticquack Tools/materials that I used in this video: ‣ Microscope: amzn.to/3RrMKUJ ‣ Screwdriver Kit: amzn.to/3OWja76 ‣ Multimeter: amzn.to/458oSv3 ‣ Tweezers: amzn.to/3c4pURU ‣ Dental ...
Hoto Tools Review | Electric Screwdriver and Air Duster/Vacuum
Переглядів 1,8 тис.6 місяців тому
A handy electric screwdriver and air duster, what more could you want? In this video I review the Compressed Air Capsule (electric air duster and vaccum) as well as the Precision Electric Screwdriver Kit Pro from Hoto Tools. Links to these tools: ‣ Compressed Air Capsule: amzn.to/3XAcvql ‣ Replacement Filters: amzn.to/4ewBfGa ‣ Electric Screwdriver Kit: amzn.to/3REv2xU Storefront: ‣ www.amazon....
Fixing a PS1 | Disc Won't Spin
Переглядів 7 тис.6 місяців тому
Will your PlayStation not read games? If your console can't read discs and especially if the disc won't spin at all you might find your solution here to solve that disc read error! Cheers and thanks for watching Storefront: ‣ www.amazon.com/shop/fantasticquack Tools that I used in this video: ‣ Gyro Driver: amzn.to/4bFISZ9 ‣ Screwdriver Kit: amzn.to/3OWja76 ‣ Multimeter: amzn.to/458oSv3 ‣ Tweez...
Upgrading a Gameboy Advance with IPS 3.0 Screen and USB C Battery Mod
Переглядів 16 тис.8 місяців тому
In this video we install and review the Funnyplaying laminated IPS 3.0 kit and GBA USB-C battery mod. This mod is user friendly for any Gameboy fan because soldering is not required to get up and running and with the new battery you can stop throwing away money on AA's! I hope this tutorial helps you out! ‣ Storefront (Affiliate link): www.amazon.com/shop/fantasticquack Mod Components ‣ IPS 3.0...
The Best Turbo Controller Sony Never Made | Dr. Masho Mod
Переглядів 88311 місяців тому
This video showcases the Dr. Masho, a Sony controller turbo mod by Dash Retro. Thanks to www.pcbway.com/ for sponsoring this video and providing the custom PCB’s we used! ‣ Storefront: www.amazon.com/shop/fantasticquack Chapters: 0:00 - What is the Dr. Masho Mod? 2:32 - Sponsor Segment 2:59 - What does the Mod do? 3:27 - How Button Inputs Work 5:43 - How the Mod Works 12:40 - Assembly 14:04 - T...
USB Microscope for SMD Soldering (Joyalens)
Переглядів 2 тис.Рік тому
In this video I review a microscope by Joyalens with focus on soldering, repair, and inspection. I review the JL249MS model, but have linked the smaller screen option below as well since it is lower cost with identical camera quality when used as a web cam and recording to the micro SD card. ‣ Microscope Links JL249MS: 10 inch monitor with HDMI output amzn.to/3RrMKUJ JL246MS: 7 inch monitor wit...
PS2 Disc Read Error Solution | NO REPLACEMENT PARTS
Переглядів 53 тис.Рік тому
This PlayStation 2 wouldn't read discs, but now it does. Hope it helps you out! Storefront: ‣ www.amazon.com/shop/fantasticquack Tools/materials that I used in this video: ‣ Screwdriver Kit: amzn.to/3OWja76 ‣ Multimeter: amzn.to/458oSv3 ‣ Tweezers: amzn.to/3c4pURU ‣ Dental Pick Set: amzn.to/3bVprl0 ‣ Hand Vacuum: amzn.to/47lvCH9 ‣ Forced Air Tool: amzn.to/3qpeU9b ‣ Q-tips: amzn.to/3YkBqfY ‣ Alc...
A Tale of Two Wii's | Disc Drive and No Power Problems
Переглядів 2,7 тис.Рік тому
Can we fix these Nintendo Wii’s with no power and disc drive problems? 📌Buy the ODM201 SE Microscope at a $10 discount here:📌 amzn.to/42vhfg0 Use this coupon to get an additional 10% off! Promo code : 10QDFZKF Tool List: ‣ Screwdriver Kit: amzn.to/3OWja76 ‣ Dental Pick Set: amzn.to/3bVprl0 ‣ Q tips: amzn.to/3Vmfgss ‣ Alcohol: amzn.to/3LCxQJl ‣ Soldering Iron - amzn.to/3IoqgyQ ‣ Solder Wire - am...
Fixing Multiple Nintendo Gamecube Issues | No Disc Read | Dead Battery Connection | Stuck Lid
Переглядів 3,8 тис.Рік тому
Disc read error problem. Dead Battery. Lid stuck open. Today we fix all of these issues and restore this cube to its former glory! ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Affiliate Links (I get a small commission if you buy from these links, thanks for helping me out!): Storefront: ‣ www.amazon.com/shop/fantasticquack Tools/parts I use in this video (or related): ‣ Replacement Batteries - amzn.to/3ITa3mR ‣ Game B...
Fixing an NES that Won’t Read Games | NO REPLACEMENT PARTS
Переглядів 10 тис.Рік тому
In this video I repair an original Nintendo Entertainment System (NES) that emits a flashing red light and won't read the game. Is the lockout chip our problem? The 72 pin connector? We'll answer those questions as we explore this common NES problem. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Affiliate Links (I get a small commission if you buy from these links, thanks for helping me out!): Storefront: ‣ www.amazon....
Why won't these PSP's turn on?
Переглядів 51 тис.Рік тому
In this video I attempt to fix two Sony Playstation Portable (PSP) units that won't charge and won't power on. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Affiliate Links (I get a small commission if you buy from these links, thanks for helping me out!): Storefront: ‣ www.amazon.com/shop/fantasticquack Tools I use in this video (or related): ‣ Screwdriver Kit - amzn.to/3OWja76 ‣ Soldering Iron - amzn.to/3IoqgyQ ‣ Sol...
Best Value USB Microscopes for Soldering?
Переглядів 32 тис.Рік тому
Best Value USB Microscopes for Soldering?
Nintendo 3DS turns off with a POP! How to Fix it
Переглядів 26 тис.Рік тому
Nintendo 3DS turns off with a POP! How to Fix it
The Best GameCube Mod - PicoBoot
Переглядів 4,6 тис.2 роки тому
The Best GameCube Mod - PicoBoot
PS5 DualSense Controller Shell Replacement
Переглядів 11 тис.2 роки тому
PS5 DualSense Controller Shell Replacement
Game Boy Advance SP Shell Swap (with IPS Screen)
Переглядів 4,1 тис.2 роки тому
Game Boy Advance SP Shell Swap (with IPS Screen)
Nintendo 3DS turns off with a POP! Finding Out Why
Переглядів 71 тис.2 роки тому
Nintendo 3DS turns off with a POP! Finding Out Why
Game Boy Advance SP Volume Slider Fix | Switch Replacement
Переглядів 9 тис.2 роки тому
Game Boy Advance SP Volume Slider Fix | Switch Replacement
Fixing a game boy advance IN THE WOODS
Переглядів 4962 роки тому
Fixing a game boy advance IN THE WOODS
Making a Portable GameCube/Wii: G-Boy Mod
Переглядів 16 тис.2 роки тому
Making a Portable GameCube/Wii: G-Boy Mod
Restoring Old Retro Game Boxes -GB/GBA Repair
Переглядів 9 тис.2 роки тому
Restoring Old Retro Game Boxes -GB/GBA Repair
Fixing a Broken Game Boy Color Game That Won't Start Up
Переглядів 7 тис.2 роки тому
Fixing a Broken Game Boy Color Game That Won't Start Up
Fixing the Start & Select Button on a Game Boy Micro | teardown and how to find replacement parts
Переглядів 2,2 тис.2 роки тому
Fixing the Start & Select Button on a Game Boy Micro | teardown and how to find replacement parts
Fixing 6 Junk Game Boys in 6 Minutes
Переглядів 5052 роки тому
Fixing 6 Junk Game Boys in 6 Minutes
Making Replacement Game Labels for N64, GB, GBA, etc.
Переглядів 13 тис.2 роки тому
Making Replacement Game Labels for N64, GB, GBA, etc.
Not Your Average Sound Fix on a Game Boy Advance SP (No Audio)
Переглядів 20 тис.2 роки тому
Not Your Average Sound Fix on a Game Boy Advance SP (No Audio)
Super Nintendo Collection: Quack Christmas 2021
Переглядів 5193 роки тому
Super Nintendo Collection: Quack Christmas 2021

КОМЕНТАРІ

  • @moonlander9012
    @moonlander9012 16 годин тому

    Hey man, I have PS2 fat that works but disc won't spin, and I can't find many resources online on this particular issue, do you have any suggestions what to do or where to look for help?

  • @whateveranalysis2566
    @whateveranalysis2566 День тому

    thank you)

  • @Pish_Tosh
    @Pish_Tosh День тому

    🙏🏼 thank u 🙏🏼 thank u 🙏🏼

  • @Marekovechujoviny
    @Marekovechujoviny 2 дні тому

    hi i have psp street e1004, and it dont turn on, not even light shows up when i charge it. I tried changing the battery thinking that was an issue but unfortunately it still wont even turn on.

  • @swimmingfish75
    @swimmingfish75 2 дні тому

    The r button on my 2ds is glitchy but still clicks, any tips?

  • @huynhtrongtin2205
    @huynhtrongtin2205 2 дні тому

    this is amazing, thank you so much

  • @TylerCMilligan
    @TylerCMilligan 2 дні тому

    The mono audio only in the left ear makes it difficult to focus on whats actually happening here

  • @brianduarte6045
    @brianduarte6045 3 дні тому

    Thanks for this. Very informative and I was going pay to get this done.

  • @kingdad-889
    @kingdad-889 3 дні тому

    Perfect!

  • @hotdogjoe4039
    @hotdogjoe4039 5 днів тому

    I got two of these and both have the same issue. I'm going to give this a shot and see what I can do!

  • @notanazi8632
    @notanazi8632 5 днів тому

    Hey, I need some help. I finally got my SP, but it has the same problem as this one. I thought it would be an easy fix, but I can't get the top middle screw out no matter what I try. Do you have any advice?

  • @Azw3thinkw3iz
    @Azw3thinkw3iz 7 днів тому

    Bruh I’m so glad pin 4 was not needed because I accidentally ripped it off lol Other than that the swap was successful 👍

  • @hammersticks7138
    @hammersticks7138 8 днів тому

    My ps2 boots up okay but the menus are patchy like you have a dirty snes cart or something. Anyone have any pointers on this? It’s so odd the boot logo is perfect but the menus are messed up. I do use freemcboot but the issues are happening with it without it in. I’m using component cables to an hdmi adapter. It was working fine when I last used it a few months ago.

    • @FantasticQuack
      @FantasticQuack 4 дні тому

      You could troubleshoot the cables more buy just trying a regular composite cable on a different monitor

  • @majestic7768
    @majestic7768 8 днів тому

    This is the best looking Playstation in my opinion.

    • @FantasticQuack
      @FantasticQuack 4 дні тому

      Too bad it shows fingerprints and scuffs like no other!

  • @SonOfRowland
    @SonOfRowland 8 днів тому

    Can i use a hairdryer to heat it up?

    • @FantasticQuack
      @FantasticQuack 4 дні тому

      You can try but I don't think it will get enough heat

    • @SonOfRowland
      @SonOfRowland 4 дні тому

      @FantasticQuack fair doos. Thanks for the reply m8.

  • @susanna8612
    @susanna8612 9 днів тому

    Still not running the disc. Have tried everything. Disc goes around once and then stop. Something makes the disc wheal not rolling. Othervice the console is fine, clean and working. Im happy we have moved into the digital era. In olden consoles the disc drive is allways the problem.

    • @FantasticQuack
      @FantasticQuack 4 дні тому

      Sometimes replacing the drive is the only option

  • @FMMDM
    @FMMDM 10 днів тому

    I just wanted to swap out the rubber membrane unde the buttons, since they feel really mushy. Seems pretty easy. Will try later.

  • @ballisticgomez2672
    @ballisticgomez2672 10 днів тому

    i recently found my 3ds i used to play on that had this exact problem and i turned it on and it worked fine. but if i charge it while it’s on it pops off. what do you guys think

  • @cheyfran
    @cheyfran 10 днів тому

    Melted my spring 😂 time to super clue a little piece of metal

  • @TMTSYSTEMSATL
    @TMTSYSTEMSATL 10 днів тому

    Thanks

  • @wantikjasonchiu4711
    @wantikjasonchiu4711 10 днів тому

    But did you know what you just did by heating up the chips, doing the flux and putting new thermal paste is not actually the real fix for the problem it's just only temporary not actually fixing it even though after you do it it might seem that the console can turn on normally

  • @wantikjasonchiu4711
    @wantikjasonchiu4711 10 днів тому

    But the problem of heating the chips is that it may actually make the chips bulge

    • @FantasticQuack
      @FantasticQuack 4 дні тому

      They will be fine if you don't go too crazy. These chips are designed to withstand solder reflow temperatures

  • @biggworm2002
    @biggworm2002 11 днів тому

    if anyone know where that background music is from, we can be friends lol awesome mod

  • @NintendoMania98
    @NintendoMania98 11 днів тому

    I have a bunch of boxes to try this on

  • @MrYaj9
    @MrYaj9 13 днів тому

    I was wondering if there was a way to trick the 3ds and allow it to boot without the audio cable connected?

  • @jakobebrown7248
    @jakobebrown7248 13 днів тому

    Kinda late but is there another link you could possibly share to that screen kit? Retro Game Repair doesnt have it listed anymore :'(

  • @pontiacmaniac7772
    @pontiacmaniac7772 15 днів тому

    Mine charges for a few minutes then the orange light goes out. I changed the battery already. The line turns off inconsistently.

  • @jacobplayz7518
    @jacobplayz7518 15 днів тому

    If this video doesn't work, then just get a new battery for the system. They're not too expensive

  • @annesmith8721
    @annesmith8721 15 днів тому

    I cannot get the screws to unscrew! They are really stuck. I did get two, but the rest were not having it! Any suggestions? I am referring to the 10 screws, once the battery is out.

  • @LucasMikic
    @LucasMikic 15 днів тому

    Where did you get the screw driver thingy to open the screw for the lid, I don't have it😭

    • @FantasticQuack
      @FantasticQuack 15 днів тому

      It's a TR10 security torx driver, they're included in a lot of screwdriver kits or you can search for the bit specifically online

    • @LucasMikic
      @LucasMikic 15 днів тому

      @FantasticQuack thank you son much dude🙏

  • @repairstudio4940
    @repairstudio4940 16 днів тому

    Great video, subbed!

  • @SandaruvaniLakshika-y7v
    @SandaruvaniLakshika-y7v 16 днів тому

    My 3ds have this problem but i played with it How ever now it cant turn on😢

  • @gcapo209
    @gcapo209 17 днів тому

    Thanks a bunch. Im gunna give it a crack!

  • @rossclarke8028
    @rossclarke8028 18 днів тому

    I cringed watching you clean that fan with a leaf blower while still connected to the motherboard. An unpowered motor when spun becomes a generator. And can send voltage spikes back through your motherboard.

    • @FantasticQuack
      @FantasticQuack 15 днів тому

      That's a fair concern, but keep in mind the motor drivers are designed to deal with some amount of reverse current ("normal" example would be power loss and fan spins down putting current flow back into the unpowered board). You probably could create an issue if you spun it high rpm for extended periods but I did not do that and no damage was incurred.

  • @nuclear_nadal_
    @nuclear_nadal_ 18 днів тому

    You saved my ps2

    • @FantasticQuack
      @FantasticQuack 15 днів тому

      YOU did that, but I'm glad I could play a useful role in it, nice work!

  • @kaveen6449
    @kaveen6449 19 днів тому

    Can you replace my controller shell for me?😅

    • @FantasticQuack
      @FantasticQuack 15 днів тому

      Check my channel info and shoot me an email!

  • @JCG105
    @JCG105 19 днів тому

    There's also a little white ratchet/gear right above the laser assembly that adjusts the distance of the laser away from the disk, if I remember correctly. When working on one of these back in 2006, I was able to get the drive to read games again after an initial adjustment, but couldn't leave well enough alone and adjusted it too close, thus destroying my copy of Devil May Cray and the damaging the laser beyond repair. Given my limited knowledge at that time, (and being thoroughly disgusted with myself), I threw the entire unit away.

    • @FantasticQuack
      @FantasticQuack 15 днів тому

      Yeah I know of that adjustment and would have been my likely next step if my other attempt couldn't get it working. Based on your experience I'll be cautious if it ever comes to that on a future repair!

  • @NoobNoobZug
    @NoobNoobZug 19 днів тому

    8:28 i cant get this thing back on. Can someone help me? :(

  • @MarkFendy-sw7hn
    @MarkFendy-sw7hn 20 днів тому

    Well a while back where i worked clean at my uncle aunts house where I found a NES toploader with a few handful nes games zelda mario tetris wise, My sister and I were amazed when we founded this nes toploader researched it and was blown away that you load the cartridges from top like you do with SNES and N64 that my sister and I play very often! But then we founded out eventually not too long, looked at back of nes 101 console that theres no av out, or yellow white red holes like yhe regular nes toaster console does, that it would be hard but possible to hook up a nes toploader as we tried the nes 101 at first red light came up only plugged in ac adapter, Then we took it to our reteo flea market game guy as he was shocked that we founded this nes 101, and said what tv did we have, and he showed us this, that you could play an unmodded nes toploader on flat screen newer tvs, with the antenna back of tv cord that you screw on, plug in ac adapter, click on channel 2 or 3, he tried our super Mario/duck hunt, Tetris then his punch out game and good but not great news, the nes game screen came on, played any game we put in it, but no sound was the real problem though as we were only able to play some nes games without sound just not zelda cause we need some sounds for other certain games especially Metroid nes, So anyways my sister and I were so happy we founded this old nes 101 at first, then got said about having to connect it, can play it but with no sound, and retro game guy said he would give us a good deal or work something out whenever were ready, then my sister and I kept this nes 101 for a few more months figuring out what were gonna do and all, since we don't know anybody around us who would mod the nes Toploader for us as we have no experience of anything to fix worked on before, as were on tight budget with life ongoing things, as i hate for anyone to mod the nes 101 for free though and my sister said it's okay bubba it's no big deal if you want you never know who else might want it, and I said I know and she said i can just keep the nes games as treasure which is fine too, but still would like to play them somehow but with sound though, So finally we went to our retro game guy was happy ro see us and all, especially for my recent 32nd birthday December 3 gave us a good deal for the nes sale gave us good money, and some other good n64 snes games and a cib GameCube game paper mario thousand year door which was very good, traded sold the nes Toploader for other games for our SNES N64 and Wii/GameCube that were veey happy okay to have! Just felt a bit bad about finding the nes 101 that would kind of worl but not how we wanted unless we wanted to drive around spend more money or not find anything then selling the nes Toploader! But not everything you find learn doesn't always go as well!

  • @ethanbardin4099
    @ethanbardin4099 20 днів тому

    I just put my consul flat and it worked

  • @EZZRAMedia
    @EZZRAMedia 20 днів тому

    I’m in same route I bought used Wii same problem was same

  • @Ahmed_Gemer2424
    @Ahmed_Gemer2424 20 днів тому

    Thank you man ❤

  • @chickly1346
    @chickly1346 21 день тому

    This video helps a lot! Thanks!

  • @Divesh98
    @Divesh98 24 дні тому

    Just found the method after a few months of mine being packed down Just wanted to be sure of something you said. You mentioned leaving it to charge for like a day after the orange light began to stay on. Was that an exaggeration? Im worried that might also damage the battery

    • @FantasticQuack
      @FantasticQuack 15 днів тому

      It is and also is not an exaggeration. I'd say at least a good hour+ minimum, but a whole day certainly would not hurt and would definitely get it to the max charge the (likely already near-death if you had to do this method) battery is capable of achieving.

    • @Divesh98
      @Divesh98 13 днів тому

      @@FantasticQuack I see. After I did the jumpstart method the first time the charging light was stable but I unplugged it after a short time of charging when I was unsure of damaging the battery for prolonged charging. I havent gotten it to charge again after with the method so dont know if I need to jump start for a much longer period. Appreciate the reply also

  • @dylansalcedo8828
    @dylansalcedo8828 24 дні тому

    Does a hair dryer work?

    • @ethanbardin4099
      @ethanbardin4099 20 днів тому

      Yes

    • @FantasticQuack
      @FantasticQuack 15 днів тому

      If you insulate the surrounding space and do it for expose the hot air long enough to get the temp high enough, maybe. I have big doubts on attempting with a hair dryer.

  • @paulpiusink6917
    @paulpiusink6917 26 днів тому

    Looks great man! I like how neatly you tucked everything away. I just finished my second GBA backlight mod and was really pleased with the results, especially since I'm still kind of an electronics n00b. But hey, I'm learning and from the looks of it I can learn a thing or two from your video's, too!

    • @FantasticQuack
      @FantasticQuack 15 днів тому

      Thank you for the compliment and I'm glad you found this useful! Looking forward to doing some new mods when I can get a little more free time :)

  • @skittishkitty209
    @skittishkitty209 27 днів тому

    I bought a psvita with a busted screen from Goodwill and this video got it looking good as new! Thanks so much!

    • @FantasticQuack
      @FantasticQuack 15 днів тому

      Happy to help! Good job getting yours fixed up!

  • @sharathk42
    @sharathk42 28 днів тому

    Hey mate, my ps2 display absolutely works fine, but there is no audio. Nothing wrong with AV cable because it works with other ps2.. Can you tell me where i can look into for the issues

    • @FantasticQuack
      @FantasticQuack 15 днів тому

      I would start by seeing if you can track down the audio chips and inspect there. Let me know if you can get to the bottom of it!

    • @elliottzuk3008
      @elliottzuk3008 День тому

      Also make sure you have your audio being sent through the AV connection and not through your optical audio jack. This should be in audio settings

  • @Blin240
    @Blin240 28 днів тому

    This board would of been a perfect board to have a type c mod installed instead of the replacement oem style port

    • @FantasticQuack
      @FantasticQuack 15 днів тому

      Was the PCB model# a certain type that is conducive to that mod? I was fixing this for a friend and he just wanted it normal/working so my mind wasn't even on an alternate route!

    • @Blin240
      @Blin240 15 днів тому

      @ model number didnt matter. Only thing that matter was if you wanted audio out of the type c or not. There was an additional step if you did that needed to be done

  • @brandonparkinson9739
    @brandonparkinson9739 29 днів тому

    Had mine in storage and it wouldn't charge. This little trick saved me money big thanks 🙏