Відео

Yes, you can replace the bands. They can be removed simply by sliding them to the side.

That is the same basically, but there is less space there, so I could not adjust that with my "tool" without removing some parts.

@techandmore99 oh ok thank you

😆 he definitely did

This sound is his contribution for others!

Did you use salt water? This video says it needs water but thats not correct. It needs to be salty like sweat.

Try closing the lid and connecting the charger. That always worked for me.

​@@techandmore99 the whole problem is that in the package we didn't have any charger and my charger for my phone doesn't fit

It (or at least mine) has a standard micro-USB connector, so any micro-USB cable should do. The connector is very slightly angled to the top, be careful when you force it.

@@techandmore99 we didn't have it in the package. I used these for 2 years charging them with a cable of my old laptop. But it broke and i can't use it anymore. I'll probably buy a cable, thank you

Thanks for the info!

Thanks! Turn it clockwise to make it higher (up to a point) or the spring tighter, or turn counterclockwise to make it softer and then lower. If you make it too low, you will remove the the nut from the thread, so watch out for that.

I respecfully disagree. Mine was definitely pretensioned, this is why turning the plate was also quite difficult in the beginning and got significantly easier. After you remove the pretension the scooter is simply lovered as you say. It is very possible that yours was set up without pretension from factory, however, when you turn the nut clockwise you will have a pretension eventually, or else the absorber would have to fall apart.

@@techandmore99 It's possible that we received different things. I received mine without pretension, turning it in either direction had no resistance and turning it counter clockwise only lowered the height with the shock remaining stiff.

Which way to you turn it so it doesnt bottom out???

I don't know the other one, but these Freebuds 6i are IMHO not as good as everyone is hyping them. I would probably not buy it again. ANC is noisy like an 80's cassette deck (try turning it on with nothing playing, that is the white noise old cassette players made between the tracks), else it is just a pair of buds where I simply can not see any reason for 95 Euros, given that cheap ones are also not much worse in terms of sound quality. 30 Euro fake 'pods from a beach bazar sound just as good. The other problem is, that there is no app for android, so no fine grained settings possible, or at least I don't know how. Somehow enabling ANC adds a lot of base to the sound. EDIT: To be fair, it has also some good things you will not find on cheap buds: The bluetooth range is very good, i can leave the phone in the flat anywhere I want, the stream is flawless. This is not the case with my other pods. Build quality and battery life are also very good.

@@techandmore99thanks for ruining my hype bro I just ordered them💀

Glad it was helpful!

Thanks!

Using a hammer does not seem like a very refined method, but hey, if it works :) The official tool to doing the adjustment is called a C-Hook Wrench as far as I can tell, like these www.amazon.com/shock-adjustment-tool/s?k=shock+adjustment+tool (no affiliation). I have never used one, although have seen others adjusting suspensions before. Such a C-Hook Wrench would also fit into the front suspension.

For me it is not that hard to turn it with this method, how many times did you turn it. I got it a week ago but 3 days ago i gave it to my friend to pick up his friend that was coming and somehow he popped the tire

The turning in the video is not cut, I did not turn it before, this is all I did. It was around 1.5 - 2 rotations, about 2, maybe 3mm. The tightness of the spring reduced significantly. It you set it up too loose and then two people stood on it, that might have been too much, the tire could have hit the other parts. The factory setting has a reason, it supports the maximum weight, for the price of being uncomfortable for lighter loads. You can not really have both the same time.

Hi, I did not, this is how I got it. The design has changed for this batch according to an email from the seller.

@@techandmore99 oohw I see, thanks

I plan to do a review, thanks for the encouragement. Bought it from banggood.com for around 530 Euros as a preorder, waited for it a month, arrived 9 days ago. It ought to be the newest 2024 revision.

Bonjour mon ami, avez-vous des informations sur la façon d'installer deux moteurs

I would not recommend the scooter , is not that good, a lot of engines that have issues brand new and they need replacing, i have a friend that bought it , he had to purchase a new engine in the first 2 weeks. They added the wrong bearings from factory and because of that a new engine was needed.

I don't think you you can install two motors, because to do that you would need to change the controlling electronics and maybe even a stronger battery for the higher load.

Thanks for the info! Do you happen to know when that one was purchased?

Nope, no advanced features, just the very basics.

Glad you enjoyed it!

December 20, 2024 mine still works fine inside and outside, the range from the chest strap to the watch is only about 2 feet or less than one meter. Like before, I wish someone reversed engineered it so we could know the transmission frequencies and what kind of transmission.

Thanks for the Info!

is it true that T900 can only be used for 80 minutes only? longer than that the treadmill will stop and ask for colling down

@@danangwd-u6z i dont know ...

Hi, for using your own barbell on the pins, the distance from the left side of the left pin to right side of the right pin is 123cm, so you need at least ~125-130 cm distance between the plates. For the whole equipment, the smith bar length is 198cm. Hope this helps!

@@techandmore99 thank you!