Hi could you please tell me the diameter of the pin hole and also the width and depth of the front rack where you can attach attachments to see what attachments are compatible with it!
Would you please tell me what is the interior dimension between the left and right frontal bars? I am asking because I am 187 cm tall with long hands and I am afraid that the smith barbell interior dimension it is less that I need taking in consideration my height and my long hands (whenever I want to do chest press). Thank you!
I bought it recently, mine has nice weld and Smith is working correctly. I don't have any issues with parts angles. Also I have more accessories or you just doesn't show all. Apart from these you showed I have two separate steel handles, one double steel handle (aka triangle) one double rope, single rope and pair or bigger ankle straps.
Nice to hear that, might be a newer batch or revision. I did not get any ropes or triangle, just two long handles with hooks on both sides (never used them), a small/weak ankle strap and two one arm rope grips (also shown in the vid when I remember correctly). Later I bought extra ropes, a bent EZ bar and better ankle straps. All-in-all, I am still quite satisfied with the equipment.
Hi, can you tell me the exact measurement from the pin on the left side and the pin on the right side? I need the width from the furthest left point to the furthest right point. Thank you!
Hi, for using your own barbell on the pins, the distance from the left side of the left pin to right side of the right pin is 123cm, so you need at least ~125-130 cm distance between the plates. For the whole equipment, the smith bar length is 198cm. Hope this helps!
Yes, that is correct, the smith bar needs to be up to use the pulleys, they use the same space. Additionally, if there are bigger plates on the pulley and on the bar, then the plates collide if you lover the bar too far. But that can be solved by not putting the plates on the bar all-in (leave 5-6 cm free on the inside symmetrically). Hope that helps.
No, it was never a problem for me. It would only be a "problem" if you do an exercise pairing where you need heavy bar in low position (like for shrugs), and the pulley for alternating execution, but else, you just remove some weights from the bar, put it high, and use the pulley for the next couple of sets.
Hey, I'm wondering how would you use those pulling attachments if you can only have thigh support on one side .. moreover, are you able to do leg curls with it?
Hi, I have bought it from a Hungarian webshop: elite-fitness.hu/termek/hms-cyklop-1-kombinalt-edzokeret/2135, but it seems to be a Polish product: hms-fitness.com/products/the-gym/home-gyms/cyklop-1/
I have cyklop 1 for over a year I trully reccomend this one ! In this price you won't find anything better 😊😋
Thanks for this review!
Glad it was helpful!
Hi could you please tell me the diameter of the pin hole and also the width and depth of the front rack where you can attach attachments to see what attachments are compatible with it!
Thanks. Can you easily take out the smiths bar so that it’s easier to,pull ups?
Would you please tell me what is the interior dimension between the left and right frontal bars?
I am asking because I am 187 cm tall with long hands and I am afraid that the smith barbell interior dimension it is less that I need taking in consideration my height and my long hands (whenever I want to do chest press).
Thank you!
I bought it recently, mine has nice weld and Smith is working correctly. I don't have any issues with parts angles. Also I have more accessories or you just doesn't show all. Apart from these you showed I have two separate steel handles, one double steel handle (aka triangle) one double rope, single rope and pair or bigger ankle straps.
Nice to hear that, might be a newer batch or revision. I did not get any ropes or triangle, just two long handles with hooks on both sides (never used them), a small/weak ankle strap and two one arm rope grips (also shown in the vid when I remember correctly). Later I bought extra ropes, a bent EZ bar and better ankle straps. All-in-all, I am still quite satisfied with the equipment.
Hi, can you tell me the exact measurement from the pin on the left side and the pin on the right side? I need the width from the furthest left point to the furthest right point. Thank you!
Hi, for using your own barbell on the pins, the distance from the left side of the left pin to right side of the right pin is 123cm, so you need at least ~125-130 cm distance between the plates. For the whole equipment, the smith bar length is 198cm. Hope this helps!
@@techandmore99 thank you!
Could you explain może about wheel exchange? Did you bought new but bigger or swap them in places?
Just swapped them, so that all the wheels moving while exercising are of the bigger kind. This makes them move a little easier.
Hi. Do I see correctly that the smith bar needs to be all the way up in order for you to be able to use the pulley?
Thank you for the review.
Yes, that is correct, the smith bar needs to be up to use the pulleys, they use the same space. Additionally, if there are bigger plates on the pulley and on the bar, then the plates collide if you lover the bar too far. But that can be solved by not putting the plates on the bar all-in (leave 5-6 cm free on the inside symmetrically). Hope that helps.
@@techandmore99 Thank you for your reply.
Do you find it a nuisance, when shifting between exercises on the pulley and the bar, or not really?
No, it was never a problem for me. It would only be a "problem" if you do an exercise pairing where you need heavy bar in low position (like for shrugs), and the pulley for alternating execution, but else, you just remove some weights from the bar, put it high, and use the pulley for the next couple of sets.
@@techandmore99
Thanks 👍
Hey, I'm wondering how would you use those pulling attachments if you can only have thigh support on one side .. moreover, are you able to do leg curls with it?
Hi, no leg curls possible. If you are strong, do pullups. If not, you dont need thigh support with light weights. Just sit on the ground or kneel.
Hi, really useful video, thanks!
Could you please tell me where have you bought it?
Hi, I have bought it from a Hungarian webshop: elite-fitness.hu/termek/hms-cyklop-1-kombinalt-edzokeret/2135, but it seems to be a Polish product: hms-fitness.com/products/the-gym/home-gyms/cyklop-1/
@@techandmore99 many thanks! :)
It looks like Force USA G3 first version.