![GENUINE JAKE](/img/default-banner.jpg)
- 38
- 260 316
GENUINE JAKE
United States
Приєднався 17 лют 2022
Paint, fab and restoration of classic trucks, tractors motorcycles etc. Why buy it when you can build it?
TRAILER TONGUE CATASTROPHE!
The tongue broke on our trailer while towing. So we will replace it with a Reese A frame coupler. We will also use the Harbor Freight 2,000lb A-frame trailer jack. The Daytona 3 ton low-profile jack comes in handy on this one!
#diy #harborfreight #trailertongue
#trailerrepair #trailerhitch
#diy #harborfreight #trailertongue
#trailerrepair #trailerhitch
Переглядів: 275
Відео
REPLACING THE TRANSOM IN A FLAT BOTTOM BOAT
Переглядів 1053 місяці тому
The transom is rotten in this Lowe fishing boat. We need to replace it. Here's how I did it. #howto #diy #boat #flatbottom
UPGRADING THE STEREO IN AN OBS CHEVY/GMC EXTENDED CAB
Переглядів 3677 місяців тому
Watch us install Hertz speakers in the doors and rear pillars then build a subwoofer enclosure for a 12" Rockford Fosgate subwoofer.
RAISE YOUR BED FLOOR ON A SQUAREBODY 73-87
Переглядів 4,8 тис.Рік тому
Raising the bedfloor of a 1983 Chevy / GMC square body isn't all that hard to do. We are cutting 7" out of our bedsides and front bed panel to raise the floor enough to clear a new four link setup and either airbag suspension or coil overs. I have not decided on that just yet. There's some cutting, welding and grinding with a little head scratching mixed in to this square body mod. Lets get to ...
Bullet LED light install on a Yamaha Road Star Motorcycle
Переглядів 1,4 тис.Рік тому
Adding some Amazon Bullet Led lights on a motorcycle.Pretty easy to do really! #diy #yamaha #how Heres the link for the lights! a.co/d/2CIXXiX
SQUAREBODY FUEL CELL
Переглядів 258Рік тому
Relocating the fuel cell on a 73-87 Chevy. Didn't go as expected. Maybe we should have bought a Boyd's Fuel cell?? In the end we decided to raise the bed floor to better conceal the fuel cell and allow additional clearance for a larger c notch and a four link suspension either on airbags or coilovers. That's to be determined. Either way this c 10 build is one you don't want to miss! #squarebody...
How to refinish your truck camper or topper. Repairing a Leer Camper! #diy #shorts #how
Переглядів 2,6 тис.Рік тому
How to refinish your truck camper or topper. Repairing a Leer Camper! #diy #shorts #how
FIX / REPAIR/ A FENDER FLARE AND OTHER FIBERGLASS OR PLASTIC CAR PARTS FOR CHEAP
Переглядів 3,1 тис.Рік тому
#shorts #diy #raptorliner How to fix a broken plastic or fiberglass fender flare for cheap using fiberglass. Fixing a broken fender flare on a Chevy S10 ZR2 and using Raptor Liner spray bedliner. #upol #hacks fix wheel moulding, how to fiberglass, plastic welding, budget car repair, best spray in bedliner kit
HOW TO RESTORE AN ANTIQUE TRACTOR / BUDGET TRACTOR RESTORATION #shorts #diy #tractor
Переглядів 7 тис.Рік тому
HOW TO RESTORE AN ANTIQUE TRACTOR / BUDGET TRACTOR RESTORATION #shorts #diy #tractor
Budget Truck Restoration (start to finish) / DIY
Переглядів 112 тис.Рік тому
Budget Truck Restoration (start to finish) / DIY
Chevy Silverado / GMC Sierra OBS Rough Country 4" Suspension Lift / Fuel Rebel Wheels / Baja Legend
Переглядів 24 тис.Рік тому
Chevy Silverado / GMC Sierra OBS Rough Country 4" Suspension Lift / Fuel Rebel Wheels / Baja Legend
DIY Paint Job Finished /OBS Restoration #shorts #diy #truck
Переглядів 949Рік тому
DIY Paint Job Finished /OBS Restoration #shorts #diy #truck
How to Wet Sand and Polish Clear Coat 🤩 Cut and Buff on an OBS Truck
Переглядів 492Рік тому
How to Wet Sand and Polish Clear Coat 🤩 Cut and Buff on an OBS Truck
How To Paint a Car at Home Yourself! DIY Budget Paint Job on a Chevy/GMC OBS!
Переглядів 1,1 тис.Рік тому
How To Paint a Car at Home Yourself! DIY Budget Paint Job on a Chevy/GMC OBS!
DIY PAINT CORRECTION / How to Sand Clear Coat / 1998 GMC K1500 OBS
Переглядів 609Рік тому
DIY PAINT CORRECTION / How to Sand Clear Coat / 1998 GMC K1500 OBS
Replacing Rusted Cab Corners and Rocker Panels on Chevy Silverado or GMC Sierra / Budget Restoration
Переглядів 24 тис.Рік тому
Replacing Rusted Cab Corners and Rocker Panels on Chevy Silverado or GMC Sierra / Budget Restoration
REPLACING THE ROOF ON A 1983 Chevy / GMC SQUAREBODY
Переглядів 2,5 тис.Рік тому
REPLACING THE ROOF ON A 1983 Chevy / GMC SQUAREBODY
Budget Truck Restoration / DIY Paint Job / 1998 GMC SIERRA K1500 OBS RESTORATION !
Переглядів 2 тис.2 роки тому
Budget Truck Restoration / DIY Paint Job / 1998 GMC SIERRA K1500 OBS RESTORATION !
C10 Chevy Squarebody Cowl Hood (dent repair and primer)
Переглядів 1,5 тис.2 роки тому
C10 Chevy Squarebody Cowl Hood (dent repair and primer)
HOW TO FILL THE SIDEMARKER LIGHTS ON A SQUAREBODY CHEVY C10
Переглядів 6182 роки тому
HOW TO FILL THE SIDEMARKER LIGHTS ON A SQUAREBODY CHEVY C10
KRX 1000 SXS GETS 35'S! INSTALL AND TESTING!
Переглядів 25 тис.2 роки тому
KRX 1000 SXS GETS 35'S! INSTALL AND TESTING!
C10 RESTORATION / ROOF REPLACEMENT ON THE SQUAREBODY CHEVY C10 BUILD PART 3
Переглядів 3,8 тис.2 роки тому
C10 RESTORATION / ROOF REPLACEMENT ON THE SQUAREBODY CHEVY C10 BUILD PART 3
BEST RETRACTABLE EXTENSION CORD REEL?? REELWORKS
Переглядів 6 тис.2 роки тому
BEST RETRACTABLE EXTENSION CORD REEL?? REELWORKS
C10 Restoration / Replacing the Roof on a 1983 Chevy C10 Squarebody PART 2!
Переглядів 1,1 тис.2 роки тому
C10 Restoration / Replacing the Roof on a 1983 Chevy C10 Squarebody PART 2!
Chevy C10 Restoration / Replacing the Roof On a 1983 Chevy C10 Squarebody PART 1
Переглядів 3,5 тис.2 роки тому
Chevy C10 Restoration / Replacing the Roof On a 1983 Chevy C10 Squarebody PART 1
looks amazing. better than factory. beautiful truck sir
Thank you!
I noticed all the products you used were pro level. Learned some brands I hadn’t heard of
I buy from a local paint supplier. If you want great results you gotta use great products regardless of what internet trolls might try to make you believe.
This was amazing to watch. Auto body is something iv never learned, but as a mechanic I love to do my own work on everything and want to tackle patch panels, blocking, etc on a 97 service truck I just bought. If I mess it up it’s just a work truck haha
Thanks for watching!
Awsome work your doing!!
Thank you!
Are the patch panels good quality. Is the metal as thick as the original panels.
I was pleased with the quality. I didn't actually measure them but yes I feel like the were as they should be.
Okay so I have a 96 I had a 4 inch rough country put on I'd say it's like perfect lift. Pretty high loved the way it turned out. I'll be posting videos on my channel soon.
Awesome
Thats sucks man but you have a beautiful truck
Thank you
Bussin and fire
thank you!
hey bro i just wanted to know if exactly everything you used and then also the spray gun for the raptor liner? where did you get that and how to i know which one to get, or could you possibly send me a link or something? i’ll make a video of what i’m going to do with my fender flares and i’ll tag you in it when i’m done. thanks for the knowledge i really appreciate it.
Amazon for the raptor liner and schutz gun. Yes you will need the gun. Everything else came from Oreilly Automotive but similar items could be grabbed from any parts store. Thanks for watching and im glad it helped ya
I'm with you on the guide coat, works much better, takes a lot of work and time invested to get them straight!! Keep at it !
Thank you!
Hello sir owner of a 98 sierra 1500 sure do love this truck and want to do a project like this as well good job man bravo 👏
Well thank you!
@@genuinejake9851 yessir🫡
Trying to find more on the c10 build.
Take a look at my channel. There are several vids.
@@genuinejake9851 I am from Morehead ky. How about you. I am getting ready start working my youtube Chan.
I know it's old video. You don't have to go back look at it.
no problem
What kind of grinning disk was that you used.
cubitron
Thanks a bunch. Gave me a thought for mine
thanks for watching
Good video man! just a quick question. where did you get the headligth?
Amazon!
So, did the boys' joy ride damage the holes on the wheels with the wrong nuts?
Nope! We got lucky!
awesome!
Thank you and thanks for watching!
What size was the lift ?
4" rough country!
Thank u
Where did you get the headlights! ??
Amazon!
Talented! Hats off!
Thank you very much
Man do u still have this truck I'd love to buy it
We sure do! It's my son's. What do you suppose it's worth?
@@genuinejake9851 whats miles?
Last i checked around 120,000
@@genuinejake9851 you hit me with number
I'll listen to offers.
why are you block sanding for wet sand? you're making your work harder.
personal preference.
Great video i just put some 30/10/14 Aftershocks on my teryx4 @ 8psi measure 29 3/4 i love them how are yours wearing?
They're doing great!
Cool thanks 👍👍😊
Thanks for watching
@@genuinejake9851 You bet. I hate to see people with crap trailers. The Huttarian Colonies of Western Canada only buy the best and toughest of equipment. They buy Mustang. Ag Expo at Lethbridge Exhibition has models on display every March. Don the owner is there every day. The wiring is all internal and properly tied into the breaks so no wire is exposed, let alone hanging looking for trouble. I saw one last week someone said was 13 years old and looked brand new. I've also seen every person who ever kept one long enough to come back for a 25 year service buy a new one because once the old one is given the once over and sold used the used price is so high they don't mind tossing in a bit more for a new unit. It's a win win for both buyer's. Waiting list is months long unfortunately but some dealers have them. Check them out on line. You will not find a tougher, better built trailer. Horse, cargo, flat deck, Oil patch pipe units, specialty cooler units, Safety shower units. what ever you need they can build. What they build will last a lifetime. They guarantee it. Cool eh?!
MUSTANG TRAILERS IN LETHBRIDGE ALBERTA CANADA HAS LIFETIME GUARANTEE AND DOES NOT BUILD A HITCHES LIKE THE PICTURE. THEY BUILD THEM RIGHT OFF THE FRAME LIKE THEY SHOULD BE. THIS HAS NEVER HAPPENED TO A MUSTANG TRAILER FYI.
Sounds like they are doing it right.
Awesome job!! She turned out beautiful.
Thank you! My boy put it in the ditch 2 weeks ago unfortunately 😢. Trying to get it fixed back up now.
Love the headlights, do you have a brand/ part number for them?
Thanks! They came from Amazon!
The torque doesn't mean all that much on those. I have never had a problem with any of mine, and I run them.down witha 3/8 impact. Now on my drag car is more important,,being it runs 170 plus mph
I would venture the torque spec is simply more of a max torque to protect against pulling the threads or snapping bolts. Not everyone knows when to say when.
Great video. Exact same thing happened to my green tundra cap. Unfortunately i dont have the tools a garage to do it myself. Prob cost $1200-$1500 to have a shop do it, lowest ballpark price
You are probably right. materials and labor have really risen. We did all that for a local guy for $400 in labor. He got a great deal
Can you just but weld a patch or do you have to replace the whole panel?
Well I would say there's more than one way to skin a cat. I would think it would just depend on the situation. I was worried that I might have trouble getting the correct shape back if I just patched the sunroof. Im sure there are people way more capable of pulling that off than me. I knew i could minimize the warpage from the welding by taking the route I went.
@@genuinejake9851 thank you for the response. I'm worried about warpage as well.
Gained a new follow, i picked up an old rust bucket of a 1997 k1500 not long ago, just put a transmission in it, body work on my rig is gonna be tough
Thanks for watching! I hope it helps ya. Good luck with your project.
Good looking truck
Thank you!
Appreciate the video, I seen the Buffalo River tee shirt, are you located in Arkansas? Do you have a tiktok also? You should make more UTV content.
Branson area! Love the Buffalo. I'll do a cage build vid soon!
Awesome, we are just an hour South
Same truck I have and need all the same stuff done to mine thanks and I'll b watching and following all the obs stuff I b subbed also and set my notifications to know u made new informed stuff 🙂 thanks so much sir good clean videos also lot are trashy
I grew up on a 881. My uncle had the first 4000 with the 5 speed like this. The 801 diesel was a powerful tractor. We used it raising tobacco,soybeans and rising beef. Besides a Farmall Cub to cultivate with this was all we needed.
Why didn't you just cut the inner and outer and put the whole thing on it?
Wouldn't it be easier just to cut the entire top off the truck in the window areas especially if there is damage on the inner panel? I have to do this job to my cucv as it was used as a step ladder
Sweet tractor. I love old ford tractors. I got a video of mine on my channel if you wanna check it out
You did a great job on the truck. Make your own business that be fun
How tall are you? Just so i can kinda get an idea of how tall the overall truck is
6'0
Does your front sit up higher then your back?
slight rake which I prefer
Do u have spacers on the back?
No I dont. I did consider that because of the different track width front/back. Its more noticeable when these trucks have combos that sit flush with the front fender lip because the back then sits inside the fender and it sticks out like a sore thumb. With this offset (or any) that puts both front and rear outside the fenders its not AS noticeable and looks fine. But you could definitely add the rear spacers to make them exactly match the front if you wanted to.
Cause I’m doing the exact same thing u did an my front was sticking out more then back so I was just wondering I appreciate it
its m twin =)
nice
How do you like it one year later?
love it
Where I’m goin you don’t need rocker panels
I can appreciate that
What did you do for mounting the bed to frame? The bed is body dropped 7" now
That requires building new brackets that are 7" higher to compensate for the difference. Thanks for the question!
Just watched this video again. 4 complete times now, gives us a really good idea what to expect for paint! Thank you, and awesome video
Thank you very much!
Original red ?