Відео

It didn't have the gas tank on that's why it shut off and didn't want to start again no gass

Did the customer get any check engine light from this? I want to do the same thing with the x pipe. Does it throw codes?

You didn't show it, but did you replace the plastic rivets with screws?

U cut out the piece of the video i came here to watch! How u free the cover from the case😅

Thanks for the video I have a 2013 Avalon and have the same issue. Original owner. It’s absolutely sickening how they were so cheap on this. Everyone has this issue and it should have been recalled

how much does this labor costs?

did you know the part number of the bearing ?

Bro is this video trolling ?? Lolll😅 we don’t even get the exhaust sound from the back 😂👍🏽

I got a 2000 vulcan 800, its over heating after i ride about 20 miles, the shop thinks the fan isnt putting enough power out so i ordered a used one off ebay, i tried everything else

Very nice video. All that work wasn’t needed if you would have noticed the broken wire. Murphys Law. 😊

The red turned out amazing! I also went with these I got them off eBay for 350 brand new and it came with new brake pads! How have they been holding up? Any brake pads overhang? I’m just waiting for the 2023 WRX VB brackets to get shipped out but until then I’m just trying to figure out what color I want my calipers.. I’m leaning towards red after seeing your! Liked, subbed, and rang that bell brother!

does catless headers affect mpg

But how did you attach the arm rest on after drilling out the plastic welds?

the BEST time to replace pads (of your choice) and you choose not to 😔. "70%" left or not (looked like less) and you didn't take the opportunity to stick in new pads, free of defects, but instead chose to put pads from an unknown car on to new rotors. I get budget constraints, but you had time to get new pads...mind boggling 🤯

Great job in making the video. So helpful. Thanks!

Thanks for the technical guidance😊

What's your honest opinion of the reliability and longevity of the VN 800 engine buy Kawasaki and what do you think about running full synthetic 10w 40 thank you I ask because I've got a 2006 vn800 Kawasaki Drifter it looks like an Indian and I want to know what I've got here it's only got 5500 original miles on it

Can someone please give me a recommendation, I've got a 2006 Kawasaki VN 800 Drifter,,, Indian I'm used to running and get where I have to go and where I want to be that means running the blacktop roads but then maybe miles of gravel roads across the USA and these modern street tires I don't like them and they don't even look good on the bike I like old school I ran a lot of bikes triumphs and other bikes but this Drifter is bigger and heavier I need recommendations as to a type and style of aggressive grip that will be good on both the blacktop on a big heavy bike like this but then carry me for miles and miles on gravel or dirt without blowing out a tire I have a spinal cord injury and don't want unnecessary breakdowns but I have to get to the woods to hunt I have to be able to run gravel and run Blacktop the tires on there are those street tires with the little lines in them they don't look good they may ride good on blacktop but they're not good in the gravel remember the old Harleys in Indians had aggressive tires on them

Annnnnd 1:28 Finally.

You're good! Nice job!

Wow nice work!

Did you had to tune your v6 for these headers?

What kind of pedals do you have ?

Thanks for the video……..I used the same seller for the “leather” which was excellent quality and as you stated, definitely thicker than oem. Used 3m glue and 3/8” staples …….like you I felt “looks pretty good”. Removing the door panel was actually easy…….putting it back was another story. Still, after a large volume of profanity I finally got it reinstalled. Wouldn’t have tried this without the benefit of your “tutorial “!

Amigo que batería usas para tu vulcan?

Not sure anyone commented on this or not. But you DO NOT need to drill out the two black plastic welds to remove the armrest. You only need to drill out the two WHITE welds. To reattach the welds, I used a plastic welder but have seen people use everything from hot glue to superglue to panel screws. I think the later is the way to go and don’t know why Toyota didn’t design it that way in the first place. Thanks for the video how-to. It definitely kept me from breaking plastic!

Tons of really good info in this vid, really helped me out.

Cortaram o berço pgp

Great video. Working on my 2007 1600 meanstreak. I started with the radiator first. Only thing that came out was dust.😮😮 Fan doesn't work. Also the small temp sensor had part of the tip broke off. Thermostat seems good though. Waiting on parts to put back together.

Great tutorial. Getting ready to do the stator on my daughters 05 750. Looks exactly like yours. Cutting the frame is a great idea. Wleder by trade so I'll have her bike fixed in just a few hours. I was laughing as soon as you cranked it and it wouldn't hit, I KNEW what was wrong. I've been riding for 53 years (God I just dated myself) and had my share of those problems. And it'll drive ya nuts. Back then I had no internet to refer too. I was making up cuss words never heard before, lol. But it's something that, in the future, you'll never forget. I timed a Dodge Colt 180° out. The engine backfired and started running backwards. NOT WELL, but it ran backwards.

Drunkmann is the goat I been with him almost 5 years and never had any problem and know o add it ewg and catless so we’re doing etuning next week can’t wait

Use oem gaskets bro

Thabk you for the vid. Recently purchased an 06 tc for my daughter. Come to find that it wouldn't pass smog die to cats. Will definitely be replacing myself.

Awesome video man. I’ll be checking out all of your videos. I’m trying to do what you’re doing. I started a channel and I’m going to be posting the work I do aswell. If you have any advice it would be greatly appreciated. It’s my passion as for you I see. And I want to share it with everyone.

You cob job CUT the frame, THEN you COB job welded it. That frame is absolutely DESTROYED

You 100% absolutely RUINED the frame- PERIOD

W T F is WRONG with you Never and I mean N E V ER hack your frame apart EVER OMG. Total COB JOB

What exactly is the problem with the stator? Does it just stop charging??

After seeing the segment for disconnecting the plug for the airbag do I have to disconnect the battery to do that or do I just disconnect the plug?

Full of ash!

I knoe this prob wont be seen by the time I take my seats out but just in case what size socket did u use if you rem thanks in advance for any help

Great results. Looking to do this to my Vibe this weekend. I don't want to come across as an asshole, but next time ditch the music and put some commentary instead giving instructions on how you achiever your results. Cheers.

Great presentation and easy to follow. Thanks 9:23

Where’d you even find these?

This is so awesome, I'm so glad you filmed this and it worked out! Hope you make more 750 content. I'm following checkered floor garage too.

That is not Amazon

So PV blaster will help get the bolts out? plan on tackling this by myself next month but I'll have access to a lift

I've never done anything like this before. I was able to do this exact thing by myself, a 50-year-old woman. Thank you so much! This was so helpful and I would not have been able to do this without you because it bothered me so much every single time I got in my car. And now I have the satisfaction of fixing it myself all because of you. Thank you

I have a 2008 Subaru Impreza with this problem on the driver's side front door. I have purchased the replacement actuator. However I can't get the door to open from the inside or the outside to start. Is there a trick to getting it to open in this situation? I need access to those three actuator screws that are only accessible when the door is open. What do you suggest?

Cutting shifter isn't a short shifter