Відео

Hello JP I have Toyota Camry 2016 inch been having issue with my car it wear the tires from inside I took it to the alignment guys more then more times I been tired of is there anyway you could fixed

Great video Sir. What is that piece that you used and where I can find it. Best if you put the links in the description.

Thanks bro!

Question: My schumacher basic microprocessor charger instruction book, indicates, for charging OFF the vehicle, you should attach a " 24 inch long, 6 gauge, insulated battery cable" to the negative post, & connect the negative clamp of the charger to that. I was trying to figure out EXACTLY what this setup would look like, so I was hoping your video would explain. I'm wondering if I can get by with using my jumper cables: attach the negative clamp of the jumper cable onto the negative battery post, & then clamp the negative charger clamp to the other end of the negative jumper cable. It seems there should be no reason this can't be done. Or just clamping the charger negative right directly onto the agm battery is okay? (The reason the booklet gives: a spark near the battery may cause an explosion. Using an intervening battery cable is a safeguard).

Thank you for your tips for a first time battery charger buyer and first time figuring out how many amps to charge. Thank you!

That last spark plug was a mf. The other 7 was super easy to do.

Best video and most helpful 😊thanks

Ok how do i get the broken piec out of the line

I am tire wear on my inner and outer tire. However the tire pressure is set to default standard pressure. It's on the right front of a Chevrolet Silverado V6

Can I try to start it while it’s charging ?

Volts alone does not mean a good charged battery. It needs cranking amps.

Thank you!

Thanks man 👍👍 BEST video

THIS VIDEO WAS PERFECT

Cordless "air" ratchet? Ha that's the first time I heard of this type of tool. Really tho this is a great video, I might just reply to absorb your knowledge man.

Thank you cuz I've been struggling like a mf!!

Very helpful. Thanks. (Gotta remember to turn off the dome light!)

Thank you, Josh. Big help!!!!

I have a new battery but havent driven vehicle sitting on driveway....Can you use this charger in the driveway with battery already in vehicle

Great video and very helpful. Thanks!

I never knew there is something called plastic welding 😮

your eyes are intense bro 😂

YOU DON'T BLINK....

Hey crazy eyes how you been man. I haven't seen you since we were locked up

Damn son!!! You reckon that little tool makes you like, certifiably genius? Golly man, that gave me a feelin like, as if, if I speak it? So it shall be, or some shit… could get used to that… listen to this shit, I’m stranded here at a 711 in okc. I went in, laid my keys down? Walked away for a sec? And one of the employees stole my keys😭🤷‍♂️why? No good. Why? I don’t understand some people. Now I’m forced to hoy wire my daughters 2008 Chevy cobalt… help me out bro, please!!!

Super helpful, clear, and concise. Thanks!

Question, i have a 2004 f250 5.4l, i replaced the ign switch, and o burned out relay... What else could i be looking at?

My 7-year-old battery has been reading just over 12V after the battery light went on the other day - but the alternator is only putting out about 11.8V. Slow-charging the battery got it to 12.23V at 80%. While I work on that crazy-tight lower alternator bolt tomorrow, I'll have the charger on to see if it reaches 100%. But 7 years - that's Costco for ya.

Nice,,,

Can an older, standard battery charger be used to re-charge a Deep-Cycle battery? Or, will an older battery charger cause damage to a Deep-Cycle battery? Thank you for a reply.

Hey, My rear left tire has uneven waves on one side when rotating. Does someone know what the reason for that could be? Its just the side facing inwards.

I have a leak in my light in my engine light always on

Good explanation

Thank you 🙏

I have a Schumacher charger/maintainer like yours with all of those features and did not understand some of the features like the 30 Amp charge after watching your video I have a complete understanding of how to use it thank you

Great trick, used on an EVAP line. Used one size smaller diameter plastic line, coated with plastic cement and it forms a solid bond inside and out. Thanks man

Thanks for the video, for long term charging (2 months ) with. A 6 amps charger is it good even if I not disconnect the battery on the car

Have you ever tried Oatey for PVC, CPVC, and ABS All Purpose Cement ? And if so how were results?

Crazy eyes!! 👀

Going to be doing this to my 2007 Chevy Tahoe and this video was excellent thank you

Hello, I’ve bought a new battery, I installed it in the car and drove right away with it. My dash still indicate a red battery signal but everything is working properly. So did I do something wrong by not fully charged the battery before using it and if so can I still charge it the way you just explained? I know it’s an old video but I take a chance writing to you Thank you

Bought the one you recommended. Reason=Nervous about big batteries lol.

Why would I have extreme wear in the very inside but the rest of the tire is perfecr.

On the starter relay 87 doesn't close 30 power is sent through 85 and 86 which energizes a coil that magnetically pulls 87 and 30 switch closed which allows power to go to the starter I'll explain ... 87 is constant power key on engine off and when you turn the ignition switch to start it sends power to 85 through 86 that energizes a coil that magnetically closes the switch between 87 and 30 then power is sent to the starter a relay is a switch that controls a bigger switch Just to clarify I'm Adam Jackson ASE certified technician on my wife's account just realized that LOL

I have yh correct voltage butt the amps are super low.

What about the steering lock

M.... F.... Pipka... Remember Tybee Island!?!?!?

Can I trickle charge my sprinter exide battery, 2017 camaro

Yeah man - really helpful thank you!! BUT i couldn't help noticing that fuel line looked like it needed to be replaced also! haha I just pulled similar looking hoses out of my motorcycle's gas tank. They were so hard the broke apart like glass. AND I've got one stuck on a plastic nipple that I need to reuse. I'm not sure how to get that old, VERY HARD plastic hose off of the nipple without breaking it. I might dremel cut it off but not entirely sure if that's the best way to do it.

Does the charger need to be plugged in with the outlet while it’s charging ?