- 21
- 181 955
Smikey
Canada
Приєднався 10 сер 2014
My goal for the channel is to record the stuff I am already doing. Who knows, maybe you will be interested in figuring things out like me and find this useful. My dad always said you can do what ever you want in life. I believe that applies to what ever prodjects you are taking on as well. You just need to invest enough time to learn so you can accomplish it. If there is enough interest in something I may do a video to address that interest. I will try improving video recording and production as I learn. Thanks for joining me on the repair experience.
If you have found the videos interesting or entertaining, consider subscribing. :)
Twitter Smikey@smikey22431078
If you have found the videos interesting or entertaining, consider subscribing. :)
Twitter Smikey@smikey22431078
Bosch Ice Maker Removal
In this video I remove and install my ice maker on my Bosch fridge. I hope this helps for those that need to remove their ice makers and my other videos didn't help.
Disclaimer - I do the things in this video for my own purposes and for your entertainment. While you may actually get some useful information from the video, you should do some research to make sure the information you see in this video is accurate. I am not responsible if you try something you see in these videos and get a different result or break something in the process.
Disclaimer - I do the things in this video for my own purposes and for your entertainment. While you may actually get some useful information from the video, you should do some research to make sure the information you see in this video is accurate. I am not responsible if you try something you see in these videos and get a different result or break something in the process.
Переглядів: 202
Відео
LED Light Repair
Переглядів 173Місяць тому
In this video, we repair a LED light assembly that stopped working. I show you a few things that should help if you go to repair one yourself. The website I mention in the video is below. www.ledsupply.com/blog/five-factors-for-replacement-led-drivers/ Music: Smoke - Lish Grooves Disclaimer - I do the things in this video for my own purposes and for your entertainment. While you may actually ge...
Painting a 2nd set of rims for my Wife's car
Переглядів 5211 місяців тому
In this video, I take on the project of refinishing a 2nd set of rims. I do this to keep costs down. Lets see if it works. Come along on the repair experience with us! Subscribe for more content. Music I used: Bumper Tag - John Deley Disco Ball - Dougie Wood Drinks On The Bar - Dougie Wood Mulholland - King Canyon Strut Funk - Dougie Wood Disclaimer - I do the things in this video for my own pu...
Recover Dinning Room Chair Seat Cushions
Переглядів 347Рік тому
In this video, my Wife and I recover our dinning room chair seat cushions. This is the first time we recover any furniture. By the end we were pretty happy with the results. And we still are! Come along on the repair experience with us! Subscribe for more content. Music I used: Boom Bap Flick - Quincas Moreira Fun Kid - Quincas Moreira Little Samba - Quincas Moreira Kula - Topher Mohr and Alex ...
2002 GMC Sierra Fuel Pressure Regulator
Переглядів 1,6 тис.Рік тому
In this video we repair my 2002 GMC Sierra 2500 HD with the 6.6L engine. This was one of the main reasons the previous owner sold the truck. I did lose audio when I recorded this so I had to voice over in post. When I talk about raising the fuel pressure command with the scanner, what I am actually commanding is the fuel pressure regulator to increase the fuel pressure. Subscribe for more conte...
Copper Rose
Переглядів 2542 роки тому
In this video we make a copper rose for my wife. Come along on the repair experience for the successes and fails. This project took about 6 hours for me. it was the first one I have ever made. Looking back I probably would have used a bigger ball-peen hammer for more mass hitting the copper sheets. Subscribe for more content. Music I used: Know Myself - Patrick Patrikios No Doubt - Young Logos ...
Ford Column Tilt Issue
Переглядів 1,5 тис.2 роки тому
Today we are trying to fix my dads 1991 Ford F150. It is a little worse for wear. Lets try to make it a little better. We fix his steering column tilt issue as well as replace his turn signal switch. Music by: Soul Food - Chris Haugen Backwards BBQ - Chris Haugen Smoke Jacket Blues - TrackTribe Disclaimer - I do the things in this video for my own purposes and for your entertainment. While you ...
Air Aspiration Sensor
Переглядів 512 роки тому
We are fixing a buzzing noise above the drivers head in the head linner. This is call the air aspiration sensor. This is on my 2002 GMC 2500HD. Similar vehicles of similar years also have this sensor. And when they go bad, can be very annoying. Music by: Barilicious - Dan Lebowitz Flex - Jeremy Blake Potato Deal - Craig MacArthur Disclaimer - I do the things in this video for my own purposes an...
Repairing My 2002 GMC Tow Haul
Переглядів 9082 роки тому
In this video I try to see what is wrong with my Tow/Haul. lets see if we can fix it. This is on my 2002 GMC 2500HD with the 6.6L. Six Seasons - Unicorn Heads Lifelong - Anno Domini Beats Moons - The Mini Vandals Disclaimer - I do the things in this video for my own purposes and for your entertainment. While you may actually get some useful information from the video, you should do some researc...
2002 GMC 2500HD Door Handle Replacement
Переглядів 4,4 тис.3 роки тому
My wife broke the door handle on my truck. So in this video, we take on replacing a GMC Sierra 2500 HD exterior door handle. This is a common problem on these trucks. If you have a similar year or model, it will be the same for you. If you are replacing a front door handle it is similar as well. I go over the differences in the video. Music: After you - Dan Lebowitz Lazy Rock - Dan Lebowitz Pic...
11 Things To Speed Up A Laptop
Переглядів 573 роки тому
In this video I do 11 things to speed up our my old laptop making it usable again. Since this video has been made, my wife and I have played through the Divinity 1 and 2 games with almost no problems. She did have a section where in the hall of echos in the 2nd game it did chug a bit, but overall very playable on this laptop. This video has taken many months to make. I have used 2 different vid...
Birthday Toy Modification
Переглядів 343 роки тому
For my son's 1st birthday he will get a noisy present. Lets just make it a little less noisy. Music: Apollo Artist: Patrick Patrikios Subscribe for more content. Disclaimer - I do the things in this video for my own purposes and for your entertainment. While you may actually get some useful information from the video, you should do some research to make sure the information you see in this vide...
Baby Mobile Modification
Переглядів 684 роки тому
In this video I take a baby mobile that eats batteries and modify it to work off of a 6V DC power outlet from a child's clock. The mobile is a poor design because the manufacturer ran a motor, light AND music just off of 4 AA batteries. And I just make it better! Subscribe for more content. Artist: Dan Lebowitz Title: How We Like It Check him out: lebomusic.com Artist: Craig MacArthur Title: Th...
Bosch Dishwasher Repair - Water Accumulation In The Bottom.
Переглядів 71 тис.4 роки тому
I repair my Bosch dishwasher in this video. Water was accumulating in the bottom of the dishwasher hours after a load had been done. This dishwasher may be original to the house making it around 10 years old. Dishwasher Model - SilencePlus 46 dBA #SHX55R55Uc164 I apologize in advance to those sensitive to middle finger pointing. After editing this video for hours I realize how much I do it and ...
Guitar Hero World Tour Drum Set Repair
Переглядів 7 тис.4 роки тому
In this video I repair my Guitar Hero World Tour drum set for my Xbox 360. Both of the cymbals were not working. The Piezoelectric sensor I replace in the are from Aliexpress. Here is a link to something similar. www.aliexpress.com/item/4000205346153.html?spm=a2g0o.detail.1000014.3.24c17400wbqYxe&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.128125.0&scm_id=1007.13338.128125.0&scm-url=100...
Fix your Bosch Ice Maker with out removing it!
Переглядів 45 тис.4 роки тому
Fix your Bosch Ice Maker with out removing it!
1927 Diesel Rat Rod Dyno 649hp/1079tq
Переглядів 9569 років тому
1927 Diesel Rat Rod Dyno 649hp/1079tq
Anyone still checking this ? My magnet is fine, but the lever that goes up and down seems to be stuck in the up position. Any clue what do do there? The gear that's to the side is the lever is blocking it from coming down all the way but i don't know how to spin the gear
Sounds like you have the cover off. Send me a photo and I will see if I can figure it out. smikey1@hotmail.com
@@smikey. Emailed you
It looks like the gear the motor drives is out of sync. I will email a replay on what I think you should do.
this was hard to watch , i think you needed to unplug the wiring harness in the back and it would have been much easier to remove and replace
Fair enough. There may be an easier way I don't know about, but I specifically edited in a way to show that doing this was a struggle.
Not 1 vidio to show how to remove this unit from fridge, amazing nothing anywhere
Unfortunately I didn't show it due to filming by myself. But I do have a video showing how to do the repair without removing it from the fridge.
@@smikey. no help, so how do you remove the unit,
Shoot me an email and I will walk you through with photos if needed.
Thanks, can you just upload the vid to you tube
ua-cam.com/video/Ka0EMsuYPrI/v-deo.html
I broke the arm and now it produces a few ices :/
That sucks.
Thank you. Thank you. Thank you. Video's like this give UA-cam value. You're video saved me a ton of time figuring out how to service my Bosch. Thanks again.
You are welcome!
Ok, so I didn't solve the problem that I was INITIALLY looking for, but you DID answer my question about the connecting pins and how they release from the plug.... I haven't found many videos on that specifically! THANK YOU!!!
You are welcome. Good luck sorting out your other problem.
Im trying to find that part that you replaced the turn signal mechanism with. Any part number or info you have on what that is?
I actually used a used part. Sorry, I don't have the new part number.
Hey i know this is an old video but im wondering if you can help. I took my drum kit from attic today not been played in 5 years or more but no corrosin or anything in by batteries but when i put in batteries there no power, no red light. Have you any suggestions? Should i open it up?
Is this for the xbox or another console? Mine is for a xbox do not sure what the red light is. I would first try another set of new batteries. You said there is no corrosion in the battery location. That would be my second place to check. If it is still not turning on like it used to, I would open it up and see if a wire or something simple came off. Just record how things came apart, and where the screws go.
So awesome! You literally saved me, and by the looks of it, dozens of other people, a ton of time and hassle trying to diagnose this. Collectively you've saved Bosch fridge owners thousands of dollars. Wish I could buy you a beer haha!
You will have to enjoy some drinks with your newly made ice for me. 😁
How do you make the ice maker cycle?
What do you mean cycle?
@smikey. yeah most ice makers have a button you could press to make the ice maker cycle. In other words to test.
Thanks for sharing! I was up to repair my drum kit! Did you simply unsheath the cable that previously had the jack connector and create the two wires to connect them to the sensor? Or did you just replace the cable? (and eventually which cable did you use?)
If I understand your question correctly, I replaced the wires from the main circuit board to the piezo sensor. The piezo sensor wiring went to a small circuit board(which I found fail). Then, there is a wire from the main circuit board that plugs into that small board. I bypassed the small circuit board. I don't think it was very clear in the video, but the small circuit board is a failure point. I used the small circuit board as a connection point. This means I soldered my wires from the piezo sensor and the wires from the main circuit board to the same points on the small board. This I felt this would help keep the wire in the correct location and provide rigidity. The wires from the main circuit board to the small circuit board were crumbling and coming apart. Hope that helps.
I had some small diameter wire I had from another project. I am not sure the size.
Thanks for the fast reply! So if I got this right, these wires just bring the positive and the negative of the sensor to the main circuit and do nothing more? If that so I can't understand why they had to put a cable with a jack 3.5mm 😅
@@leonedavide if its the same as the kick pedal, you can literally use any aux cable like ones youd find on old wired headphones (you can find for less than $1 at garage sales for example. or laying around the house)
Same thing happened twice with out 2005 Chevy Silverado .
Yup. You know the pain then.
ty
You are welcome.
I want to replace the sensor for my red pad on my set but I don't know if they're a certain kind of sensor or does it matter? Just a Piezoelectric sensor ? Also does the size matter too?
I don't think the size of the sensor matters. The ones I bought were 1 3/8" diameter.
@@smikey. it's fine, I measured one that was on my drumset and they're 27 mm , bought a pack on Amazon
Great!
I just bought some drums for my old Wii aux cables are no good time for a repair
I hope you figure everything out.
@@smikey. 💯 GOOD
I thought I'd have to buy a new set after the drums I barely ever used stopped working, thank you so much for the cheaper alternative, such a shame that Guitar Hero has died.
Glad it worked out. You might just have to get the band back together to play now! 😁
I wish I didn't buy a bosch dishwasher. Replaced the drain pump and still have water accumulation. Next is the control panel,it stops before the drain cycle
Dang. That sucks. Some models of dishwashers don't vent well and can get moisture into the circuit board. Good luck.
I cannot remove the ice container in my Bosch refrigerator. I depress the release button but the ice container will not release. Any suggestions as to how to remove the ice container?
It could be stuck. So push on the button and gently just wiggle it up and down and side to side and see if you can get it to free up. Hopefully that works.
@@smikey. Thanks. I read that in one of your earlier posts. I’ve tried it multiple times with no success. I just raised the temperature a few degrees to see if that will work. In the meantime I will keep doing what you suggested.
That is another alternative that it is frozen. I hope it works out!
@@smikey. Thanks. I’ll let you know.
What type of wire did you use?
I think it was just some 20 guage wire I had.
Bosch dishwasher model SHE43F15UC/64 FD910401139 55 v at water valve with valve disconnected, will not operate the valve. Does the power come from the control panel? Is there a replacement control board available?
Short answer is that I don't know. What I would do is do a Google search of your model and see if you can find a wiring diagram. As for you second question, I would look on a parts supplier like amresupply.com You can do a search by model and see what is available.
I watched your video and I’d like to know. I have a broken Audio Jack on the circuit board on the GHWT Drums Yellow cymbal. How and where do I connect the red and black wires from the sensor bypassing the circuit board so that my yellow cymbal will respond when I hit with the Drum sticks.
If I understand your question correctly, the two wires coming off your pizio sensor could get wired up to a couple of locations. I soldered them both up to the leads for the audio jack on the small circuit board. This way, this makes it a little more secure when the wires are getting moved around. It doesn't matter in this circuit which of the 2 wires(that come from the main circuit board to your cymbal) you attach the red wire from your sensor to as long as you connect the black wire to the other one. You could also just solder the wires coming off of your pizio sensor to the wires coming off the main circuit board to your cymbals. I hope this answers your question.
@@smikey. Yes it does thank you. I only asked as the Cymbal mini plug come off the Circuit Board. Would it be better to bypass the Circuit Board or just solder the Joints on the Cymbal mini plug back on to the Circuit Board
I hope everything works out!
@@smikey. so it would be more secure and responsive if I soldered the joints on the cymbal mini plug back on to the Circuit Board instead of bypassing the Circuit Board all together am I correct. I appreciate your help with this.
Yes. The wires going to the cymbal will have stress on them. You don't want the wires to pull off the pizio sensor.
Thanks for sharing it with us. I am on my way to build / repair a drum kick pedal. You provided the source for the piezo sensors. Very helpful. Thank you very much!
You are welcome!
thank you so much for this video we were trying to figure out what to do with the same problem and your video resolved our dilemma.
You're welcome!
What orientation does magnet go mine has white paint on one side?
Put the clean magnet side toward the circuit board.
We have the 2012 model B26FT70SNS/02 can you assist. They no longer make a replacement unit.
What is the symptom you are experiencing?
@@smikey. ice machine not working
Your magnet was in the right location as talked about in the video? I will try to find an ice maker replacement part for you.
I found a couple of websites still selling the unit. The OEM part number looks like it is 00649962 www.genuinereplacementparts.com/11033701-oem www.searspartsdirect.com/product/1bm32q4myi-0046-630/id-00649962 Taking your model number and searching your fridge model for a parts diagram will also show more websites that you can buy from.
@@smikey. thank you will check them out. Curious why repair store and technician told us no longer made.
How do I take off the front panel of the dishwasher? Need help please!
The lower panel?
Hey friend! I have the EXaCT same drums except for Wii. What foot pedal do you use?? No one seems to talk about it! I got one from eBay and that’s gray and can’t seem to get it to work!
It is a redoctane Guitar Hero Kick pedal. It was the one that came with the kit. Mine is black.
@@smikey. thanks for the response! Mine is gray with an orange stripe…. Any idea why it doesn’t work? It was advertised that it works for the Wii…
I have not done guitar hero for the wii. I would fist search out photos of what the drum set is supposed to look like. You should be able to get an idea if that is the right pedal. That is where I would start. Does it plug in to your drum set?
@@smikey. it does plug in. It looks like I probably have a Rock Band foot pedal… I contacted the seller as well. I’m surprised it doesn’t work anyway… I wonder if I can modify it to work somehow
Do you have a rock band, or guitar hero drum set?
My Bosch ice maker doesn’t make enough ice. I’m always hitting the reset button to drop ice. How do I fix this problem
I am not too sure. Is it the same model of fridge as mine? I am pretty sure my ice maker doesn't have a reset button.
@@smikey. BOSCH BSH Home Appliances Corporation, Huntington Beach, CA, 92649, USA MODEL FD8810 B20CS51SNS /02 000198 Side by Side REFRIGERATOR/FREEZER 115 VOLTS / 1 Phase / 60 Hz Refrigeration load amp./ Intensite maximal refrigerator 5.7 et 7 ou congelatour Defrost heater load amp./ Intensite maximale defrost 1.8 c(Un LISTED HOUSEHOLD REFRIGERATOR US AND/OR FREEZER REFIGERATOUR ET 7 OU CONGELATEUR LISTED MENAGERS HOMOLOGUES (wanglu) heater Refrigerant / Refrigerant R134a P.S.I. HIGH/P.S.I. LOW 6.7 oz PSI HSUTE/PSI BASSE 300/103 Customer Service of BOSCH:800-944-2904 FREE STANDING INSTALLATION ONLY OBSH-17-1 INSTALLATION NON ENCASTREE SEULEMENT
It is a different model. Unfortunately I don't know how it works or even what would be different.
Didn't show how to remove or install icemaker??! Useless video
I did not have a good camera set up. Hopefully future videos will be better. Here is a link to haow to do the fix with out removing the whole ice maker. ua-cam.com/video/6k_-RdshgE4/v-deo.html
ua-cam.com/video/Ka0EMsuYPrI/v-deo.html
So basically, the leaking water inlet fills the basin after each cycle?
Yup. If the dishwasher is turned on it will drain the water.
Also watched your other video. These are crucial to me troubleshooting. We had the same magnet in the exact same spot (came out of bracket) Here's hoping it fixed the issue Thanks!
Glad it helped!
Same issue for my ice maker that hasn't worked for at least 5 years. I had it all apart before but missed the loose magnet. Just repaired and now waiting to see if it fixes the issue. Thanks for posting your fix!
Good luck. I hope you hear the sweet sound of ice being made soon!
@@smikey. Confirmed. This fixed my ice maker's issue. Thanks again!
So what was wrong with the part?
The old valve was not sealing properly letting water leak past its sealing surface.
Great job….!! We’ll done…!! Thank you….!!
OMG!! Our Bosch ice maker FINALLY WORKS!! It was the dislodged magnet that manages the ice lever... we waited over 24 hours and sure as hell, we FINALLY have ice after 6 years of ZERO ice. We followed each of your steps... THANK YOU!!
😃
There have been a few comments about this, but put the magnet in place. Test it out to make sure it is making ice. If not, flip the magnet around and test again. @chrisluehmann3094 found that the magnet is pole sensitive He said one side of the magnet has a very light dusting of white paint. This side must be facing away from the sensor. Once it is working, I would make sure you know which side needs to face the magnet then put some glue on the back of the magnet so it doesn't come out again. (the part of the magnet that faces away from the sensor) I used super glue myself.
Hey @smikey Thanks for this video/ I followed your directions in your other video and my magnet was out just like yours. I put it back in and it worked for one ice-making cycle but now but its not working yet again. I popped it back open and the magnet is still in place. I'm going to have to take this whole thing apart I guess. Does anyone have any ideas?
How long have you let the ice maker run to make ice? I left mine over night the first time. If it has been a while, pull out the tray. Do you have water in the ice cube making section? Is there any ice in the tray holding location? There is a second magnet on a gear as well. It should be shown in my first video. Let me know if those don't resolve it.
@@smikey. It has been in there 2 days now. The first time I followed your quick-fix method where you pulled down the icemaker and popped the cover off to replace the magnet (mine was out). It worked instantly and made one good tray of ice. I was so happy to hear it working. But, after that, it quit again. I took it apart partially because I thought the magnet fell out again but this time I noticed an excess amount of ice in the upper cube-forming tray. It's like it filled, froze couldn't dump the cubes, and then filled again on top of the cubes. The motorized arms that push the ice out were frozen solid and it appeared to be jammed so I took the whole thing out and let it thaw. I put it back together 2 days ago and hoped I would hear that magical sound that it makes. Nothing. I am currently debating taking it all out again and testing the components on the boards. mainly the Hall effect sensors. I wonder if the magnets are pole-specific.
@chrisluehmann3094 I don't think the magnets are pole sensitive. I have been wrong before. There is a gear that also has a magnet in it. If I am correct, this gear is used for dumping the ice. The magnet you found out is for the ice filling stage. Check the gear and see what you find.
@@smikey. Both magnets are in place still. It looks like I'm going to have to dig a bit deeper into this issue.
There have been a few comments about this, but put the magnet in place. Test it out to make sure it is making ice. If not, flip the magnet around and test again. @chrisluehmann3094 found that the magnet is pole sensitive He said one side of the magnet has a very light dusting of white paint. This side must be facing away from the sensor. Once it is working, I would make sure you know which side needs to face the magnet then put some glue on the back of the magnet so it doesn't come out again. (the part of the magnet that faces away from the sensor) I used super glue myself.
Is the voltage out put from the control board to the oven element ac or dc?
It is DC. Looking at the diagram, the temperature prob is run through the circuit board. The board has rectifiers changing the A/C to D/C.
Shoot me an email and I can send you the wiring diagram. Unfortunately it doesn't show the wiring of the circuit board. smikey1@hotmail.com
@@smikey. The circuit board schematics is what i wanted unfortunately its hard to come by -like when an smd gets fried you cant read it tks anyway cheers- I repaired one recently...........
How did it go?
@@smikey. it went well tks the voltage from board to igniter element in oven read 118v AC
Thank you - It worked and I am so happy. It's been a while since I had a successful project. I really appreciate it. I can't imagine figuring this out and filming it at the same time.
I am glad it worked out. 😁
good job
Thanks
Ah yes the door handle delete… I just did this cause my door was frozen shut. Sturdy design for sure.
Haha. Or our big muscles. I mean my wife's. 😉
Thanks for the info. Our magnet was in exactly the same place. Waiting to see if that was the only issue…
Good luck! 🤞
Please help PLease please..... I have a bosch HEI7282U/09 Problem - Conv Broil, conv Roast, broil does not heat up (very slow) - Bake works fine - Conv Fan works Work Done - Replaced back round element (new=56 ohms, no Continuity), seller says that is the expected range - Replaced Top Element (new=17.5 ohms, good continuity) What should could be the problem? Many thanks
You said the seller said. My advice, Don't buy it. It sounds like a headache waiting to happen. You are coming in after other people have messed around with it and have not fixed the problem.
Took me 15 min. to do the same.... and another few months until I found this video. So happy to have my dishwasher working again.
Great!
Respect, A Carhartt is a man's best friend. I fixed the GMC too.
🙂
Great job buddy I'm having the same problem with my kenwood dishwasher I will give this ago keep up the great videos regards nigel from the United Kingdom 🇬🇧
Thanks!
100% could have gone another revolution - great video mate 👍
🤣
I've had to fix this on my 04 Yukon. Being on the moving gear selector just causes stress on those wires.
Yup, it sure does. I hear early tesla door handles have a similar issue of the wires braking and the door handle stops working.
Hey mate I am at 2:49, inserting the blade bit into the bottom slot to pop off the cover. I've been at it for nearly an hour and I can't seem to get it to pop out. The inner plastic tab pushes up when I use the blade bit, but the cover doesn't pop out like yours did. Same model and such. Any advice? Thanks in advance.
I ended up putting the blade bit into a multidriver and flexing the front panel down below the tab and then just pulled the cover off. As suspected, no magnet in the arm. It was stuck to the spring. Got the magnet back in, reassembled the whole thing and turned the ice maker back on, drawer is back in. Hopefully when I wake up I will have ice. Thank you!
Check to make sure you get the screw at the top out. Try to pull the ice maker out and down as much as possible. Then push the tab like you were and with a second small blade screw driver, gently pry at the cover seam. Maybe a second set of hands would help with all this.
I am glad. I sure hope it works out for you. I love when I am able to get save money and get things working at the same time. 😁
@@smikey. Its the best feeling of accomplishment in the world. You rock!
Let me know when you hear the sweet sounds of ice being made!
Fantastic walk-through! This was exactly what I needed. One small upgrade that might help folks: after you connect the braided supply line to the elbow/intake, you can turn on the water to check for leaks *before* doing the rest of the re-assembly (as the valve defaults to “off”). I figured out this short-cut after putting everything together, discovering a small leak at elbow/intake connection, and then having to disassemble everything again to fix it. Again, thanks! Grateful folks like you put these videos together.
Haha. You are absolutely right. It seems obvious now, but I didn't think of it at the time. Hopefully other people read this and do it your way. Glad it helped.