Відео

Not my material. I didn’t pay for it.

No problem brother. Preciate u watching.

@@treysterthepainterturner8404 I already followed you on TikTok, but I'm still having problems with the ingredients you use, here in Indonesia it's still hard to get them.

Your painting technique is very good, I really enjoyed practicing it

I preciate it brother💪🏾💪🏾💪🏾

Having problems with what?

No lie. I’ve been getting great great color match.

Well for one u used rattle cans to paint a bumper. U need actual paint gun and small compressor at least. But u can dry to wet sand it and buff it and see how that do.

@@treysterthepainterturner8404I’ll try that Friday coming up as it’s my next day off I can spend some time on it. But I personally already have a 30gal Campbell compressor in my detached garage. Think it does 10.2@90psi. As long as this is good enough for painting, it would great to know the tools needed to get the job done right. If you don’t already have a video, it would be great to show one showing the tools you use for each type of paint, what kind of paint can be used and why specific size nozzles are needed if I’m saying it right like 1.2,1.3,etc. I’m completely new to this but I already have a setup where I can once in the blue spray paint a part without affecting anyone or anything else. Thanks again for the response!

@Lafiro if I did do stuff from the garage I would definitely do vids on that but unfortunately I don’t for now. But that 30 gal would do great for small jobs like bumpers and only 2 panel jobs. But if u wanna do whole car jobs. U would have to least have a 60 to 80 gal compressor and I think a 1.3 would work for all condition jobs. 1.2 would do great also too.

@@treysterthepainterturner8404 I dont think I will ever do cars. Just touch ups. What I did was a disaster / learning curve. My garage closed on my bumper and took with it the paint and sliced into the plastic. I had to put putty, sand it and paint it... multiple times because I kept messing up. Got the rattle cans and some areas look great and shinny. But majority is very bumpy looking and dull. I already used multiple foam pads and different grades of polish compound and the bumper feels super smooth. But maybe the issue is the paint layer itself. Either way, it was my first time every and I can't say I did a bad job at all. At least you can't tell unless you absolutely go looking for it. I blended it correctly too. But I am still left with the same burning question; money not being an object. What spray gun(s) could I get for these small jobs. I see them cheap on amazon for example and then a few hundred for a ws400 or ls400. But I don't know the difference and again, just want the best I can get. I could use them to paint cabinet doors for my wife next. Don't see why not?! lol Correct me if I am wrong and I shouldn't do that with car paint.

@Lafiro got with a Lph-300 that will work great for bumper jobs and stuff it’s a perfect gun you can spray that gun at 18 psi and it gives u great Basecoat lay down and Clearcoat.

1.4

Wait I’m tryna understand what u saying. Lol

@@treysterthepainterturner8404 the painter here in Wisconsin West Bend Crash Champions. Said I was uplying the Glasurit 100 line with too much fenes 😆

@@treysterthepainterturner8404 I get the application method from seeing your videos

@raymondrodriguez1158 oh u was putting too much paint material on.

@@treysterthepainterturner8404 yup

🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

I think that’s what it means. The obs is for the water base. Like the none wet on wet base.

​​@@treysterthepainterturner8404 NO pal trey you Google it that what it's mean split nozzle technology OPTIMUM BASE COAT PAINT SETTINGS

No I wet bed it first the I base and clear. It’s a 1.5 coat application with this paint system

Yes 1.3 nozzle.

Lol. Who don’t care for a glass finish. A beautiful slick glass finish. Lol

Sounds right to me.

​@@treysterthepainterturner8404 SATAJET CC IS KING 🤴 trey is there mutch difference with the iwata spray WS400 1.3 clear coat paint gun 🔫

@ANDY-we7mr they very different

It’s working great.

Yes sir

@@treysterthepainterturner8404 I must’ve received a defective one lol. Mine has never liked wide open. I still get good results but at half a turn open from closed 🤷‍♂️ I think I’ll buy a new cap see if that fixes it. Thanks. Good work man 🫡

@Correctedpaints it should work. U can get the cap from SPSupplies.com. There where I got mine for my Sata Jet 5500rp

26 psi

Lmao. It’s a great gun. I can’t complain about it.

HV30 and 1.4 Tip

HV30 and 1.4 tip

Lol. This glasurit not spies Hecker.

@@treysterthepainterturner8404 my bad I’m trippin I guess lol

@JohnnyBravo02 lol. I use to use spies Hecker pamacron almost a year ago.

@@treysterthepainterturner8404 ohhhh okay. I just found your channel a few weeks ago and was checking out your videos . That’s probably why I thought you were still spraying that

@JohnnyBravo02 nope. On Glasurit 100 Line now. Since November 6, 2023.

Yes sir. Lol

It’s a 1.2 on it with the c1 yes.

​@treysterthepainterturner8404 GOT A PRICE MATE,ON MY CAR 🚗 2 WINGS,PAINTED AND BLENDED BONNET AND THE FRONT BUMPER MATE,AND TREY HE,SAID HE LINE EVERYTHING UP I HAVE SOLD MY POP UP SPRAY BOOTH 😑 SHOUL HAVE KEPT IT MATE TREY THAT DEVIBLISS OLD SCHOOL AGAINST THE, IWATT SERIES 2 W400 1.3 HD WHITCH ONE IS THE BEST 😅😊

😂😂😂 ig u makes the 1st best. Haha 🤣

@@treysterthepainterturner8404 😁😁😁 🤜🏼🤛🏼

@thetriggerman954 🤣🤣🤣 it’s all good. You number 1 🤣🤣😭😭😭

@@treysterthepainterturner8404 it's a tie 🤝 just two hard working brothers doing our thing. ☝🏼🙏🏼

@thetriggerman954 true story. 💪🏾💪🏾

💪🏾💪🏾💪🏾

U have to spray the blend at a 45 degree angle

A lot of Cree what u talking about?

On the Sata it’s 1.3

Oh u gone love the paint system. All the colors seem to match. Tips no not really. The only difference will be that you’ll be moving a lil slower when basing and make sure to stay 6 in and do a 90% overlap to make sure to have coverage other than that that’s it brother.

No I haven’t.

Haha. I preciate it bro 💪💪💪

Preciate it. 💪💪💪

I preciate it brother. Yeah i love the CC myself.

💪💪💪

Yeah trigger my boy. Posting what??

This video, spraying metallic with the purple cap lph 400

@runningman00900 oh yeah i love the lph-400 purple cap. It does really good with metallics.

923-460 𝑪𝒍𝒆𝒂𝒓

𝑰 𝒑𝒓𝒆𝒄𝒊𝒂𝒕𝒆 𝒊𝒕. 😎

𝑳𝒐𝒍. 𝑶𝒉 𝒖 𝒘𝒊𝒍𝒍 𝒍𝒐𝒗𝒆 𝒕𝒉𝒂𝒕 𝒈𝒖𝒏.

Oh yeah. Have it down packed.

Yes siiiiir💪🏾💪🏾💪🏾

Oh wow. That i cant help with might be a defect on the gun. Try to get a rebuild kit for it. Like another cc kit.

@treysterthepainterturner8404 yeah it's really weird. I was looking forward to using it and I haven't had a chance to try to fix it.

@theirishman088 yeah just get u a rebuild kit comes with the cap, needle, and nozzle.

@@treysterthepainterturner8404 I appreciate the response. Sometimes the job comes out like glass and other times it has a little too much peel to it. its a nice spray gun tho.

𝐈𝐭 𝗴𝐢𝐯𝐞𝐬 𝐚 𝐩𝐞𝐫𝐟𝐞𝐜𝐭 𝐟𝐢𝐧𝐢𝐬𝐡 𝐟𝐨𝐫 𝐦𝐞.

Lol 🤣🤣 how i make u think iwata has an old dirty bastard gun?

@@treysterthepainterturner8404 because you kept saying ODB instead of OBS 😂😂🤙

Yeah i'm in the US and i ordered the gun from overseas.

@@treysterthepainterturner8404 eBay or spray guns direct or something like that?

1.2 tip

😂😂😂 i try my best💪🏾💪🏾💪🏾

Haha. I preciate it brother 💪🏾💪🏾💪🏾

I preciate it brother. So I’m not using the DV1 for base. I’m only using it for clear. Mottle on the other hand I don’t have that issue at all so my question to u is what guns are used using for 100 line. I spray my base at between 26 to 29. It all depends on the binder I’m using and gun I’m using. My WS-400 Base I always spray at 29 psi except when I use the 40 binder. And u just have to spray your base at constant speed.

@@treysterthepainterturner8404 I’m using the DV1 for base, I was told to run 20psi by the instructor. I’ve just been having some issues so I’ve been watching a bunch of your videos to see if I can piece together a solution & see what I might be doing wrong. Just a bit weird to me because it was all coming out perfect for the first couple weeks & then suddenly I can’t get silvers/greys to lay down right. Everything else has still been looking perfect though! I’ll keep learning & watching & I know eventually I’ll lock in on 100 line. Thank you for the response!

@suprask8r.93 are u using the 1+A air cap on the gun?? And I bet u having issues with it because u moving slow. U can move a lil fast but remember to keep a 90% over lap. I bet that’s why.

Nope. Didn’t know I had one if so when in person

🤷🏾‍♂️ ask the body man.

Glasurit Clearcoat. 923-460 clear.

@@treysterthepainterturner8404 so "premium" clear coat from glasurit, where I work we use Glasurit 924-68 clear it's like multi purpose. BASLAC 35 line solvent base and 90- line water base