Nice, love the MB50 RTS wet bed, works nice with the 3M PSG with 1.4 tip. Great to see quality painters see the benefits of 100. Your L00 71/72 sealer looked great too.
I preciate it brother. Yeah all I use is the mb50 wet bed and the 3m 1.4 tip for wet bed. I use the LPH-300 for sealer because the sealer so thin and the LPH-300 breaks it down really well
Great work treyster as always. I’ve talked to you before about using a wet bed . How come with the old paint line you used you didn’t use a wet bed on your blend panels.
Because I was using solvent base paint and u don’t make the solvent paint as wet as the 100 line. 100 line requires it to be wet so when u blend with it u will get really bad sand piling.
For now until Monday I won’t know about the WS-400 obs. But the LS u can only spray to 26 psi and I do dump material on three panel. It supposed to be for solvent and 1st gen and up water base while the WS-400 obs is for wet on wet paint like what I just now like Glasurit 100 line and Spies Hecker Hi Tec.
@@treysterthepainterturner8404 THANKS TREY FOR GETTING BACK ANDY JUST SUBSCRIBED TO YOUR CHANNEL I THINK THE IWATA WS400 SERIES 2 1.3 OBS IS THE ONE DOES SOLVENT BASE COAT PAINT AND WATERBORNE TREY AS WELL JUST EBAY AS MADE ME A OFFER ON THE BLUE ONE SOME DISCOUNT MATE I HAVE A NEW SAGOLA EXTREME AQUA 4600 1.3 NEVER USED IT WAS GOING TO SELL IT AND GET THE DIGITAL VERSION AND YOU CAN CHANGE THE AIR CAPS TO MATE BUT THERE JUST SAGOLA BROUGHT TWO NEW GUNS 🔫 OUT VERY EXPENSIVE TREY AND YOU CARNT SWAP THE CAPS OVER THAT SATA JET CC CLEAR COAT PAINT GUN IS BRILLIANT MATE IAM GOING TO RING THAT SHOP OFF EBAY AND ASK HIM ABOUT THEM GUNS LS400 SERIES 2 ET ENTECH 1.3 AND WS400 1.3 OBS BLUE CAP ANDY 😊
@ANDY-we7mr yeah the Iwata great guns. And u can change your Sata RP to The CC with the nozzle set up. So it’s your choice of hands what u went to do or what gun u want to get.
Looks like your doing a drop coat while spraying. I’m used to letting it flash and turning the pressure down and backing off. I am also used to seeing people letting the wet bet flash before spraying into it but I’ve always sprayed into a wet wet bed lol I paint boats though.
@@treysterthepainterturner8404 I hawe also spies hi-tec waterborne. That one is a ass busting juice. If the silver is not done right- clear it and do it again. But the 100 line is awesome at silvers. Atleast those, who i painted so far. And also the same- if hawing problems like some sandpaper marks, then i mix it with blender, pressure down and it works
@Fun_Gear Yeap. The silver’s definitely been good with the 100 line. And its blends out good for me. I just make sure that the panel stay wet with the wetbed.
I just it on a bumper just. I had it set to 20 psi. I close the fan in and turn it out 2 turn from in to out and 3 to 4 turns out from in on sealer and clear I do 2 turns in to out and 3 turns in to out on fluid for clear.
Superb gloss my friend.... You are Top painter....
I really appreciate it brother. I do my best. 💪🏾😎
Awesome job..awesome painter
I preciate it brother!😎💪🏾
@@treysterthepainterturner8404 no thanks..thanks for share your knolish
No problem brother.
Looks great Trey
I preciate it brother 💪🏾😎
Man great job you’re bad ass painter, dude
I preciate it brother. I do the best I can.
Nice, love the MB50 RTS wet bed, works nice with the 3M PSG with 1.4 tip. Great to see quality painters see the benefits of 100. Your L00 71/72 sealer looked great too.
I preciate it brother. Yeah all I use is the mb50 wet bed and the 3m 1.4 tip for wet bed. I use the LPH-300 for sealer because the sealer so thin and the LPH-300 breaks it down really well
i don't think any one could do better your channel should grow pretty fast it really looks nice thank you for the video
I preciate it brother. I try my best.
Great work treyster as always. I’ve talked to you before about using a wet bed . How come with the old paint line you used you didn’t use a wet bed on your blend panels.
Because I was using solvent base paint and u don’t make the solvent paint as wet as the 100 line. 100 line requires it to be wet so when u blend with it u will get really bad sand piling.
Ooof that clear looks good though! The clear I use on boats is a pain.
Oh wow really. How’s that? Like kuz it’s to thick or something
Good job that pal 👍 whats the difference between the green cap ET 1.3 ENTECH AND THE WS400 1.3 OBS BLUE CAP
For now until Monday I won’t know about the WS-400 obs. But the LS u can only spray to 26 psi and I do dump material on three panel. It supposed to be for solvent and 1st gen and up water base while the WS-400 obs is for wet on wet paint like what I just now like Glasurit 100 line and Spies Hecker Hi Tec.
@@treysterthepainterturner8404 THANKS TREY FOR GETTING BACK ANDY JUST SUBSCRIBED TO YOUR CHANNEL I THINK THE IWATA WS400 SERIES 2 1.3 OBS IS THE ONE DOES SOLVENT BASE COAT PAINT AND WATERBORNE TREY AS WELL JUST EBAY AS MADE ME A OFFER ON THE BLUE ONE SOME DISCOUNT MATE I HAVE A NEW SAGOLA EXTREME AQUA 4600 1.3 NEVER USED IT WAS GOING TO SELL IT AND GET THE DIGITAL VERSION AND YOU CAN CHANGE THE AIR CAPS TO MATE BUT THERE JUST SAGOLA BROUGHT TWO NEW GUNS 🔫 OUT VERY EXPENSIVE TREY AND YOU CARNT SWAP THE CAPS OVER THAT SATA JET CC CLEAR COAT PAINT GUN IS BRILLIANT MATE IAM GOING TO RING THAT SHOP OFF EBAY AND ASK HIM ABOUT THEM GUNS LS400 SERIES 2 ET ENTECH 1.3 AND WS400 1.3 OBS BLUE CAP ANDY 😊
@ANDY-we7mr yeah the Iwata great guns. And u can change your Sata RP to The CC with the nozzle set up. So it’s your choice of hands what u went to do or what gun u want to get.
Awesome job WHAT IS THE CFM ON SATA
I preciate it brother. It’s 15.2 cfm.
On the series 2 digital guage, is it reading in bar or psi !?
Psi brother.
Looks like your doing a drop coat while spraying. I’m used to letting it flash and turning the pressure down and backing off. I am also used to seeing people letting the wet bet flash before spraying into it but I’ve always sprayed into a wet wet bed lol I paint boats though.
Yeah this paint system is a wet on Wet application it has to stay wet. I am doing a drop coat at the same time when I come back to that panel
Yeah, this one is danger to let flash off. Need to get it done in imediately after wet coat.
@Fun_Gear exactly or you’ll have problems if not. Sand piling you will see.
@@treysterthepainterturner8404 I hawe also spies hi-tec waterborne. That one is a ass busting juice. If the silver is not done right- clear it and do it again. But the 100 line is awesome at silvers. Atleast those, who i painted so far. And also the same- if hawing problems like some sandpaper marks, then i mix it with blender, pressure down and it works
@Fun_Gear Yeap. The silver’s definitely been good with the 100 line. And its blends out good for me. I just make sure that the panel stay wet with the wetbed.
I don’t recall you doing a video on that 3M gun.. I just got one from our paint rep, what are your settings on it? From sealer to clear
I just it on a bumper just. I had it set to 20 psi. I close the fan in and turn it out 2 turn from in to out and 3 to 4 turns out from in on sealer and clear I do 2 turns in to out and 3 turns in to out on fluid for clear.
@@treysterthepainterturner8404 Ima them settings out when I get the chance too. Ima be doing a spray outside for my personal car ina couple weeks.
U tried base too?
Yeah try it out and I’ve done base, clear and sealer with it.
@@treysterthepainterturner8404 I just did primer this morning. This thing sprays like a dream!
What about sata universe gun did you try 1.2 I
No. I haven’t tried that gun.
He got that one because you can’t get in the US
Maybe idk but it still works good