Відео

Absolutely fabulous video, was searching for Corolla washer tubing fix, but came across your video I just couldn’t stop watching until the end Thank you for sharing knowledge in such a simple, elegant and eloquent way

Thanks John, noticed a leak on the rear side of my left wheel well with no fluid flowing from the nozzles. Very descriptive and helpful; again thank you! Jeremy (2018 Forester XT)

Mine doesn’t even work I pull the trigger and I hear something

So, I just watched this video, and I had a similar situation, and I learned by watching your video that if you just hit that back side you cut off hard enough, it opens :). “You are trying to open a red security tag, it can be opened with …a red security tag.”

What Is the wiring with the white connectors at the end of the wiring called?

Por fin lo que estaba buscando

how the hell do these things actually work? I have magnets that can pick up like 50lbs and they're nowhere near strong enough to trigger this. it was hard to move the rod by hand!

Great video! I just follow your instructions and oppened mine very easy, dump question, is this the latch actuator? Mine has been beeping when driving, I read it could be a latch issue

yeah i also have a fucking buzz saw in my house

Scar the shaft where you add glue

John, you forgot to wrap the Y tubing with something to protect it from the sun. Perhaps a Gorilla all-weather tape or anything similar so you won't be doing this again 8-10 years from now. Take note, some folks will replace that Y tubing with brass ones from HD or Lowe's for longevity BUT I strongly advise against doing so. The combination of brass/metal and any liquid will just introduce corrosion particles in those lines and will easily clog the nozzles. Thank you for the detailed walk-through. God bless and keep them coming. Cheers.

I guess the magnet video is a scam. I was thinking about buying one tooo.

Thanks for the good video! I'm having the same issue with a Sentry Safe. Wonder how much did the call for a locksmith cost?

Use a fork insert around pin and twist, the pin will bend sideways and release.

Ordered parts and hope to fix next weekend. Thank you very much for this video!

Thank you, you saved me the hassle of buying and returning it.

The cowl tabs are different than the usual ones as I see you found out😂

Do they replace due to the seals disintegrating? If so is their a link where to submit your warranty info? I tried without success to submit a form, but it kept timing out.

I take mine off clean it, and put it back together with no issues.

Great stuff. Mine has this issue: it will work flawlessly for exactly 4 times after the battery is disconnected and reconnected. After that, the dash light for the door comes on and it will not function. I know you are not a fortuneteller but based on your experience, do you think the fix you offer would address my issue?

Just spend the extra money and stop whinning about nothing. You get what you pay for. How does it affect your images?

THANK YOU! My niece bought a pair of pants from Target, they forgot to remove the tag. THIS WORKED!!!!! Thank you so much (We had a graduation and left at 5 am, no way we could run into a target & make graduation.

How do u take the soundbar off

Such a POS part..... Great info for my work tomorrow. Got it done. A tip: Push up, from underneath on the square push pins, while using the fastener removal tool, this kept any of them from breaking. I had replaced the Y hose fitting once before and it broke again, in about a year. I got a better Y connector at Auto Zone,,,,, 65 of them for $16.

Thanks. Used a hack saw instead of a Dremel. Easy peasy.

They improved the trigger mechanism, and came out with a 2.0 version. I lost my 20 ounce 2.0 version that I have been using for years about two weeks ago. And when I was buying a new one on Amazon, I found that Stanley is not making the trigger mug anymore, so there are only a few left on Amazon and a few other Web sites. In addition, I had 16oz 1.0 trigger mug that needed a replacement part, but they don't make replacement parts for either the 1.0 or 2.0 anymore. If you need a replacement part, they will give you a choice of the new mugs like the Areolight which seems to be their replacement for the trigger mug. Since they couldn't replace the part for the old trigger mug, they gave me three choices of their new mugs, and I chose the Areolight, but it has no trigger, so I don't think I will use it. The reason I always used my trigger mug is because it is spill-proof until you press the trigger when it is by your mouth, so if you knock it over when not drinking from it, it doesn't spill. Anyway, I bought three new 20oz 2.0 trigger mugs, and that should last me a lifetime, but Stanley no longer makes the best coffee mug, and they don't have the parts to fix them. So my advice is take care of what you have, and get yourself a replacement or two in case it breaks, and do this before you can't find them anymore.

Thanks John, this video came in clutch while working on my 2020 WRX. I have no idea how I got the Cobb intercooler in there without removing the cowl but she’s gotta come out to remove it now.

Thank you for this. The cashier checked me through, did remove the plastic alarm thing for one of the items, and as I was leaving, the alarm went off. The security girl said, you're okay. I found the tag after I got home. I tried to call them this morning, and they hang up after so many rings. Your video will save me a trip there.

i was waiting for you to turn on the wipers to see it work

One of the best DIY tutorials and explanations on UA-cam. Thank you.

i tried to plug my speaker into the side of my monitor via usb and its still not working. any ideas on how to fix it?

hola, sabes como hacer para que funcione la perilla del volumen?

why even try this? You get what you pay for

YOU GET WHAT YOU PAY FOR LMAO

Worked like a charm!! THANK YOU 😊

Thanks for a such a thorough easy to follow video.

Great video! Sorry for the dumb question but what kind of oil do you put on the little electric motor?

Thank you! I didn’t have a dremel, but was able to cut the end off by sawing it off with a kitchen knife. Worked perfectly & saved me a trip back to the store.

sadly i didnt have my Dremel out as its packed but i did have a pair of sharp tiny scissors to make a hole and push the button up!!

Is there a way I can connect my phone with monitor?

UPDATE Comment: Tree Lopper works great, too. I had a solid encasement, no Dremel, et al.

Thank you so much. Got home to find out that the cashier missed two tags. You save me a trip to the store. I will return the tags on my next Target run. When you live in 115 degree heat, going outside is no fun despite my ac. Maybe a video on blocking radiant heat from the car top onto my bald head would make a good video share? Trial subscribing to you today, Casey in AZ (Arizona, USA).

Thanks. My magnets that I normally use, did not work. Darn kids and self check out!

Have been using the Neewer grip on my R6 for 2 weeks. No issues. Love the 2.4GHz remote that came with the grip!!!

I have one and have never had any problems down loading new firmware on my r6.I have had any problems with my old 80d either.For such a small amount to own one. you are very picky. I think user error.plus wonting the same quality for two thirds less in price. very poor video

oh yeah let me just get my DREMEL TOOL and saw off the back of the tag. super easy and elegant.

Hello What is the nozzle internal diamètre please ?

good video but your reasons are insufficient. for the £200 pounds price difference idc about these differences. my r6m2 is weather sealed by numerous lenses I use arent so it doesn't matter if the batterygrip is sealed or not and bottoms don't matter as much and when I got my newer grip just now its not sticky and has a good feel to it.

They no longer have replacement lids...hoping there is a fix. Stanley replaced the first one...with a non-matching colour(like you), that one has since failed. THey are sending me an inferior mug to replace it, trying to tell me that they didn't' have to do so, but its a curtesy....I expect a lifetime warranty to mean lifetime warranty!

Amazing detail. Thank you!