Відео

For sure when switching scenes, not sure when switching presets, on a first thought I would say no but I will check when back from a transfer on two weeks

No it doesn't. It is muted only if you connect headphones

@@TutoJam so it will direct record both video and audio at the same time

@87RedSpecial yes indeed. Check the channel, there are two specific tutorials for that

Try setting the USB in audio in settings

Hi my friend, I do not own a gen 3 but I have a plan to do a tutorial for gen 2 that should be applicable also to gen 3. But I fear you will have to be patient for some weeks

@@TutoJam Thank you for your quick reply. The Gen 3 is different in many aspects. The tone Engine is different and The app is different as well. They also changed the USB in the back from the printer style to USB C. The Xsonic KAT worked perfectly with the MKII model but that is no longer the case. I'm pretty sure the Chocolate will do the trick but it's just knowing how to get The Chocolate to talk to the GEN3 app for IOS. I do very much appreciate your helpful videos as I have learned a lot. One last question unrelated to Katana. On the Mightier APP is there an individual Patch Volume like in the NUX Mighty APP? I don't see one but I am probably missing it?Thanks again my friend.

@soundscapematrix thanks for the clarification about the protocol for katana. About Mightier Amp app: current revision has global volume but not a per-preset general volume. You can obtain a similar result setting the amp volume but I do not remember anything block independent

@@TutoJam That individual patch volume is vital in getting a good balance. Maybe it will be implemented somewhere down the road.

@soundscapematrix well, honestly I never found that vital as I use to fine tune the effect chain every time with that purpose, personally I strongly prefer the global volume. The best option would be having both. Please forward your proposal for that feature in TUNTORI's GitHub site. github.com/tuntorius/mightier_amp

Thank-you my friend for your compliments and for sharing your happiness about this great device

Ciao. Non puoi farlo dal Tab editor, devi farlo da "Preset"

@@TutoJam ho provato Preset..scelgo Preset.....tre pallini a dx cambio canale....ok ma niente

Ma ti aspetti che si sposti nei preset memorizzati sul dispositivo? Perché non funziona così

E come funziona......ho collegato al mpp una pedaliera m-wave chocolate e per mia comodità volevo mettere nei primi 4 Preset i suoni che uso più di frequente e ad esempio il numero 7 volevo metterlo in posizione 4 (o blu) e così via.ma cosa serve allora nella sezione Preset poter cambiare i canali?grazie

@opta2000 quello che metti nella sezione preset viene memorizzato solo nell'app quindi l'app cambia i preset al volo ma non viene memorizzato nei sette preset che ci sono sulla macchina. Se vuoi spostare i preset di default prima li salvi come preset trovi nel canale altri video dove è spiegato poi ritorni nella sezione editor scegli quel preset e lo salvi sulla macchina c'è un pulsante appositamente per quello. Ci sono dei tutorial appositi nel canale purtroppo sono in inglese perché non sono mai riuscito a doppiarli se vuoi puoi seguirli se riesci con l'inglese o con i sottotitoli

Well, sorry but no. The app shows the options available in the device firmware. Mighty Air and Mighty space are different

Hi, you can see from the IRs available. The choptones version has only 18 slots for use IRs as the first two are filled by choptones ones. In any case I am not expecting a factory new device to include the choptones firmware, it if very likely you will need to update it

Thank you for the reply.

Sounds like your phone memory is not far enough for this. How about decreasing video resolution?

@@TutoJam Thank you for so kindly replaying to my message! That was a great suggestion, but unfortunately didn't work. I was afraid my MPP unity was faulty so I updated the firmware. Didn't work as well. It works fine on my Samsung S7 tablet. With my phone, it records audio from the mic just fine for any video. The issue happens when recording from the usb-c. Thanks for trying! All the best! Regards from Brazil.

You are welcome, I am sorry you could not solve. All the best!

Yep. Ampero 2 is famous for its better distorted sounds but it introduces a longer delay I don't like

It's completely true. And what you say is even more applicable to guitars. When I was young everything below 2000 bucks was pure s..t, nowadays I can find great instruments for even 100... Well, honestly speaking this amp is somehow an outsider, as I say in the video it costs less than its components alone, for this reason I felt a little ashamed when I purchased it...

Definitely. Too bad copyright strikes scare me a ton. I just uploaded some very basic samples I recorded that very morning but I did not dare to include and converted into shorts for safety. Nothing good but they give a better idea

Honestly I love it, it has everything I love in tube amps: creamy crunch, reactivity under the fingers, dynamic response, but it is also so cheap and light I am never scared to use it or to bring it anywhere. My fiancee already renamed it "Burro", the italian word for butter, due to the sound and its color

He he. 😁. I am so scared of copyright strikes my mind get blank when I have to improvise. In the channel you will find some very simple samples I recorded that morning freely but I did not dare to include. Converted them into shorts so I should be safe. Thabk-you for watching and also for your feedback

Зачем звучат струны, не участвующие в игре? Их надо приглушивать. Очень грязный звук. Есть два главных правила в игре на электрогитаре: то что должно звучать, то должно звучать, и то что звучать не должно, то звучать не должно.

I was just slapping the strings without a clue. I will cut the samples section, I understand it is too hurting

Definitely. 😂. I am a good technician and a very bad player. Consider also I got a copyright strike for replicating 3 notes. I am so worried about it I scramble everything for better safety, frustrating.

Hey William, ignore this jerk and follow your bliss!

Thank-you but he is right. In any case I just uploaded also some basic samples I made that very morning and turned into shorts for better safety

@@TutoJam You can play standard forms like 12 bar blues or use copyright-free backing tracks to minimize (potential) strikes. It is no sure thing because the algo is always changing and buggy, but at least you can effectively "load the dice" in your favor.

@shaft9000 yep. I will prepare or compose a simple sampling suite for these needs

You are welcome my friend, happy to know you found it useful

They provided all possible levels of freedom. I will double check but I seem to remember if you save the preset then the bpm is fixed for all scenes

Did you recalibrate the expression pedal? Also make sure the input meter is turned off

If you are using Mighty Amp yes. If using Mightier Amp you can import it in the app but you can also simply play it through Bluetooth to the MP plug

Thanks👌

You are welcome my friend

Too bad I cannot test it as I do not own the JR but when I tried with the regular GP-200 it was not working even if they report it as supporting MIDI through USB, I am expecting this to be due to missing USB host (a PC) in the connection. GP-200 is not working as USB host. Sorry I cannot help more than this.

Hi, I do not own it but I am expecting for it to work just like the mighty air. If you are on windows you need to download and install the ASIO drivers from the official website and after a reboot your PC should detect it as an audio card

@@TutoJam Thank you so much I hope it would work I will install it

Hi, I did not made an A/B test but I have to say I had a similar impression but cannot tell if it is suggestion due to enthusiasm

Happy to help my friend. Just make sure you backup carefully your presets so that in case you are not happy you can always roll back to version 4

Ho my friend, as the support to Mighty lite mk2 has been added just recently this looks like a bug. Would you mind reporting it into the GitHub repository by Tuntorius? In the meantime I fear you can only use your smartphone buttons

@@TutoJam Im glad to do that. Please give me a link.

@ariefranken github.com/tuntorius/mightier_amp

You are welcome my friend, I am happy you liked it

If you have some presets you edited and you want to keep them you need to pass through version 4. Version 5 can only import presets exported from version 4

@@TutoJam ok ,understood but I have no presets yet , It is very new, I only want to Know if is possible jump the V4 ,and if V.5 maintains the V4 updates like Lone Star amplifier.

In this case yes

@@TutoJam Thank you

Thank-you my friend, you are very kind. This is an hobby to me, I use devices I own and I try to describe everything as I would like it would be explained to me. I am very happy you appreciate

Grazie della pazienza se l'hai guardato tutto 😄

Still dead. Luckily I could return it. But don't worry, a new one is on its way

Many thanks for your kind words. Happy to help!

Hi, thank-you very much for your feedback. You are perfectly right. I can confirm moving blocks affects all scenes together. Keeping this on top for reference of other friends. About the use of Duotime you are right again, I was not so clear in the video, I wanted to remark you can have two delay blocks but not 2 reverb blocks. Duotime is incredibly powerful indeed but note technically the parameter knob is not exactly a reverb even if it makes it sound like that

Yep, that was my understanding, thank-you for the feedback

With mighty amp it is very difficult. Make sure to use instead Mightier Amp, it greatly extend functionalities and allows a fantastic management of backing tracks. See here: ua-cam.com/video/QujVo4wj7QM/v-deo.htmlsi=qx__cHmYviINizBc

Thabk-you my friend. I have in program to make some more like this in the near future

Hi. As mentioned in the video check this one ua-cam.com/video/aB6uvAmXCYY/v-deo.htmlsi=Ixkr-kcXd42NtJ3I

Another clear tip...

Thanks a lot my friend

Sorry but I cannot understand

Hi my friend, thanks. As far as I know there Valeton does not have a specific booster button. What I did sometimes was using one of the foot switches to activate a compressor or a booster. Personally I even prefer using an equalizer as I can obtain contemporary a volume boost and and a push to middle frequencies to break out in the mix.

Hi, I have not made any video but I did what you are trying to with mi Mighty Air (substantially identical to Mighty lite BT). The best option is using a line cable to connect the phones output of mighty lite to the aux in of the other amplifier. Just note you cannot use the guitar input of the big amplifier, the levels are not compatible and you could go from strange noises even to damaged to your amplifier

@@TutoJam Thanks for the feedback. Yes, we cannot connect directly to the guitar input due to the difference in signal level and the impedances are different.

Thanks a lot for your compliments and your feedback!!

Hi my friend, thanks for your feedback. You are definitely right andI know the meaning of scenes and snapshots, I say a couple of times the device does not support them but has something partially covering that. By the way there are devices like the NUX MG-30 or the Ampero which are advertised as supporting scenes while they have this same functionality. About video length again you are right, too bad I have very little time so I am not doing any post editing. I will try being more straightforward in next video but please consider many viewers prefer a slow and well explained guide so it is difficult to keep a good balance. Thabk-you again for your suggestions

Hi, it is quite a new device, for the moment you could start importing presets for mighty plug pro into Mightier Amp and replicating them for the 8BT. I know it's annoying

@@TutoJam I dont have the pro plug, but thanks alot for the reply, i subbed...if you have a chance in future please make video for the same 8BT

@shehabkg1383 you do not need to have the plug pro, mightier amp allows you to work with the presets even without connecting the device or even owning it

Hi my friend. I was looking into it but it will take some time

Hi, technically it should be possible, if you look in the settings you will find that the pedalboard can use for MIDI: internal clock, external clock or both. I am positive if you select "external MIDI" it should sync with your DAW as long as it sends the correct clock signal

@@TutoJam I agree with you, I'll keep trying, thank you!

Which device do you own?