- 14
- 117 459
T C
Приєднався 14 жов 2012
2001 Ford Ranger AC Fix, A Must Watch
This is a 2001 Ford Ranger with a 4.0 L engine but it should be the same for all engines. This is a simple air conditioning fix before you spend money on the compressor. Fuse number 17 (20 Amp) is for the DLC(I inadvertently called it a DCM), but it enables the compressor to start running. You won't find this on any schematics or I should say any easy to find schematics. There is also a fuse and a relay under the hood. but this one should be checked as well.
If the fuse keeps blowing then at least you will know what circuit to chase.
If the fuse keeps blowing then at least you will know what circuit to chase.
Переглядів: 4 461
Відео
Dodge Ram Heater Motor Replacement 1994 - 1998
Переглядів 128Рік тому
This is a quick video on how to replace the heater motor on a second generation Dodge Ram. This truck is a 1997 3/4 ton diesel. I apologize the first 10 seconds of the video are on time lapse, It was unintended. The back bolt on the heater motor was by and far the most difficult part of the project. For me, using a swivel attached to the 8 mm socket and a long extension really helped. The venti...
Oregon Coast Beauty
Переглядів 80Рік тому
Oregon coast September of 2022. Newport to Cape Disappoint Washington. Simple video showing the picturesque scenes along the coast. Newport Seaside Pacific City Depoe Bay Astoria Cape Disappoint Embrace by Sappheiros | soundcloud.com/sappheirosmusic Music promoted on www.chosic.com/free-music/all/ Creative Commons Attribution 3.0 Unported (CC BY 3.0) creativecommons.org/licenses/by/3.0/
2nd Generation Dodge Ram AC (Air Conditioner ) fix.
Переглядів 21 тис.Рік тому
Quick video on a potential air conditioning fix for a 2nd Generation Dodge Ram. I had checked all the fuses and relays for the AC when my compressor quit engaging and all I got was warm air.. But after lengthy research I found that the 20 Amp "Horn" fuse, located under the hood, is also tied to the AC. If this fuse is blown the compressor won't engage. As soon as I put in a new fuse it started ...
1999 Toyota Tacoma LED Bulb installation
Переглядів 9 тис.2 роки тому
Installing LED bulbs into a stock headlight housing unit on a 1999 Toyota Tacoma. This is a very simple video showing the benefits of LED bulbs over Halogen bulbs. I'm just a do it yourself guy and I think about anyone can do this. LED light bulbs are installed in the stock reflector housing unit. Before and after videos of LED vs Halogen lights from both driver and oncoming traffic's perspecti...
Learning to drive a stick gone wrong.
Переглядів 552 роки тому
Older sister teaching little sister how to drive a stick, lol
2007 Toyota Avalon LED lightbulb installation
Переглядів 24 тис.2 роки тому
This is a quick and simple video on how to install LED light bulbs in your third generation Toyota Avalon. This covers the 2005-2007 models. The "high beams" are halogens with a projector style housing, so it's basically plug&play. The "low beams" are HID, so you cannot install LED bulbs without removing the ballasts, etc ... The last 30 seconds of the video shows the comparison between the hal...
Cell phone charging issue fix
Переглядів 1862 роки тому
In this video I show one way to clean the charging port on your cell phone. Many times our phones are in our pockets or purses and the charging port fills up with lint and other debris. If you've noticed your charging cable doesn't feel tight when you plug it into your phone, or it doesn't seem to charge very good or consistently, this may be your issue. Just make sure you use something plastic...
2007 Toyota Avalon fog light (bulb) replacement
Переглядів 4,7 тис.2 роки тому
This is a simple video on replacing fog light...light bulbs on a 2007 Toyota Avalon. I replaced the oem bulbs with LEDs. This isn't the best video but it shows you the basic steps to replacement. Took me about 5 minutes to do both sides. LEDs look a lot better in my opinion.
1999 Toyota Tacoma rear shock replacement. 1st Generation Tacoma
Переглядів 4,7 тис.2 роки тому
Rear shock replacement on 1999 (1st Generation Tacoma). This isn't a professional video, but it does show you one way to replace your rear shocks. You DON'T need a lift, jack, jack stands or any special tools. You basically need a 17mm wrench and a hammer. It took me approximately 20 minutes from start to finish. This is a simple "how to" video, I probably made mistakes, but the point of the vi...
2006 Mazda 6 downstream O2 sensor replacement
Переглядів 16 тис.3 роки тому
2006 Mazda 6 downstream O2 sensor replacement. There was a P0431 code on my daughters car. This can either be a faulty O2 sensor or an issue with the catalytic converter/manifold. So we started with the cheaper option. I know this isn't the best video, but hopefully it helps you.
2002 - 2007 Mazda 6 Oil Change, 3.0 Liter V6
Переглядів 4 тис.3 роки тому
This is a very simple video on how to change the oil and filter on a 2002 - 2007 Mazda 6 with the 3.0 liter V6. The video isn't the best quality as I was trying to film and change the oil at the same time. But it gives you the basic knowledge to complete this task by yourself.
Windshield washer fluid, topping off. 2006 Mazda 6
Переглядів 1,4 тис.3 роки тому
Windshield washer fluid, topping off. 2006 Mazda 6
1993 - 2002 Toyota Corolla Heater Core Replacement
Переглядів 27 тис.3 роки тому
It is possible to replace the heater core on your 1993 - 2002 Toyota Corolla without removing the dash. I couldn't find a UA-cam video to help so I tried making my own in hopes of helping someone else. This job took me a total of 7.5 hours. I know this is a pretty bad video but it does show it's possible with rough instructions. I have a Haynes manual I bought at AutoZone for $25, it gives all ...
Would have loved to see the cover put back on.
Thanks I’ll give this a try
20 cents you can go to the junk yard and pull them and throw them in your pocket but most times you always check your charge on the refrigerant i have had to replace mine with one from the junk yard bc there its $40 compared to over 300 new
Man your good✊🏼 been tryna figure this out for over 2 years and that blown fused fixed it👌🏼
Wicked thanks worked for my 1996 360 magnum
Awesome video man, very straightforward. Helped me out a ton. Thumbs up!!
Muchas gracias amigo, por mostrar que fusible es,
That would make sense why my horn also stopped working. Trying it now
Thank you very much. This was my problem
So is it a BLOW horn? 😂
Great video!
Добрый день, не могли бы вы расказать как поменять фарингейты в цельсий??
YOU SHOULD HAVE READ THE INSTRCUTIONS!!!__ as you installed in incorrectly. The Collar on the LED is supposed to be removed and mounted by itself, then install the rubber dust/weather cover, then push the LED through the dust boot into the installed LED collar and twist to lock the LED back into its collar. The mount and light will work the way you did it but you lose the weather boot with your method.
are they still working?
Yes, working great
Great vid thanks.
This odd helpful and a little intimidating as I gotta change the heater core on my 92 Corolla. I will be referencing this epic video!🤘🏻 thank you for taking the time to make this
Does your high beam indicator dash light work?
Yes it does
@@T.C.. Mine doesnt, and I dont know why. Thx..
Thank you.
Can you share the site from where you ordered these?
Amazon
Thank you
When I install one LED light it works when I install both of them one side won't work. What's the deal
A mechanic told me several years ago that an engine is easier to change in a Toyota Corolla than a heater core.
Thank you T C! that helped!
Thank you!!!! It took me no time at all and as you said I didn't remove my battery.
Good very and it’s straight forward to the point. Nicely done 👍
How come everyone show to do easy one why the hard like driver side I can’t change my drivers side because there is no space between the battery and the light I can’t even fit my finger tips in there
Get somebody with really thin hands. It can be done. If not, then move the fuse / relay box. Problem is that one of the bolts may be underneath the battery platform. This is how they design stuff.
I do not know how and where you take out light bulb, I only see your hand and old bulb. Are you Magician? Bad Video.
It worked on a 2001 Durango R/T 360 5.9 ... THANK YOU!! this saved me in this heatwave in the Midwest right now! my truck is all black..it was about 140 degrees inside of it
Did your horn work before replacing the fuse?
Nope, but I sure enjoy the AC more than the horn 😄
Sheeit, my horn works but not the A/C
Did you have to disconnect the battery first or anything?
Nope, no need
My error code says bank 1, sensor 2. Which one is that?
👍🏻
Thanks, This video is too simple but VERY VERY VERY useful 👌. Can you put a link to order the lights?
I tried to go back to my order on Amazon but they are no longer available. I'd just order the brightest ones you can find.
Hey, don’t you know you got to use black duct tape on the cracked water reservoir! Yeah, my cracked about 20 years ago.
I rebuilt the neck of my windshield washer reservoir with some fiberglass cloth and resin....
You think it would work on a 1500? In the winter I have heat but summer I got no ac. Sounds like it’s trying to kick on but doesn’t. Appreciate it thanks in advance.
Give it a try
Do you know what to do if the air is cold but just barely blowing?
I'm guessing it would be the blower motor
If it's barely blowing or only blowing in defrost. Check the vacuum tubes. Just traced mine and it blows. Now I'm trying to make it blow cold.
I greatly appreciate your expertise in the subject. I was about to sell my 12v because I was tired of trying to fix the ac system lmao replaced that fuse and I'm good to go until the next thing breaks on this truck of mine!
Don't we lose the ac gas by removing those pipes? Ac gas refills are quite expensive here, I'd appreciate your reply. Need to do the same job on my brother's 99 corolla
Yeah, I had a local shop evacuate the freon.
@@T.C.. thanks for the quick reply. I'll use this video as my guide.
i cant seem to get my low beams out. how did you do it
Good work. 👍👌👏
Thank you!! Got mine done in less than 10 mins with this video
Was this Bank 2 Sensor 1?
Bank 2, but if you crawl under the car you can look up and see the bank 1 sensors very easily and the process is the same
Just got an 05 and getting ready to start maintaining it, thanks for the thorough video!
Same!
10:39 Is a tutorial I have been looking for. Can't get those removed. Needle nose pliers. Now I know! Thank you
what is size of bulb ?
Wow what a great video thank you for walking us all through this in how to remove and replace the heater core, I'm going to replace mine very soon, I'm hoping this can speed up the process!
The light is bright but it doesn't seem to range as far
The video may not show it, but the LEDs are so much better. I live where there are a lot of deer and elk and these lights help a ton.
Cool idea to wire w high beams
Thank you, great video and helps me fix my burnt headlights
Thank you for the video, do you have a video for the installation of the LED fog lights you put in the Toyota Tacoma the same truck in this video? if not what was the band are link for the ones you used please. As I have the same truck. Thank you again truly appreciated.
Nilight 40001S-B Bar Super Slim 2PCS 7 Inch 30W Spot Driving Fog 3600LM Single Row Off Road LED Lights for Jeep-2 Style Mounting Brackets, 2 Years Warranty a.co/d/7KsE1gw I actually didn't do a video on these 7 Inch LED light bars, but they are super bright. I also bought one of these Nilight - NI -WA 06 LED Light Bar Wiring Harness Kit - 2 Leads 12V On Off Switch Power Relay Blade Fuse for Off Road Lights LED Work Light, 2 Years Warranty a.co/d/8b63oqi
@@T.C.. Thank you so much I truly asperate your reply. I order both links you sent me and will try the install soon. Please let me know if you post anything with the Toyota Tacoma. Thanks again Big Fan love the videos
Would you ever consider making an installation video of the process for the fog lights! Would love to implement this onto my truck!