Midea air conditioners professional and fast installation on GUAM

Поділитися
Вставка
  • Опубліковано 29 лис 2024

КОМЕНТАРІ • 380

  • @MsladyPearlz
    @MsladyPearlz Рік тому +56

    Finally got it up and running. The only delays we had was because we realized we needed some extra parts (I’ll list that below) ua-cam.com/users/postUgkxihMYiJNXcHdbH-7ihymsLz61l7jVyb5O . So we have a loft where our current hvac just couldn’t seem to keep cool during the summer. We have been using a window unit since we bought this house over 6 years ago (all the houses in this neighborhood were built in the 80’s and majority of the houses built like ours use a window unit). I hate window units because they are just so noisy and the one we had really only cools one side of the loft. I had contemplated upgrading our current HVAC, but with all the rising prices these days, it would take years before saving up enough to do that. With the advice of my father-in-law (used to run an HVAC business), he recommended we get an inverter instead. We thought we bought everything we needed, but there were just a few other parts we didn’t anticipate needing (which is what caused most of our delay). My friend and father-in-law did all the work to get it installed and running and now we have nice cool air circulating nicely throughout the entire loft. It is very quiet and even the outside unit is much quieter than our main HVAC unit. Saved ourselves thousands getting this.

  • @RedSunFX
    @RedSunFX 2 роки тому +12

    I remember reading in the manual that you should have 3 meters minimum line length. So it's alright to go shorter?

    • @CD-gl7ix
      @CD-gl7ix 2 роки тому +3

      Yes, but you must reduce the refrigerant. a short line is not recommended because it could transfer noises from the outdoor unit to the indoor unit.

    • @maciastrn3024
      @maciastrn3024 Рік тому +1

      2meters.

    • @josuenolasco382
      @josuenolasco382 Рік тому

      Muchas teorías, si se corta la tubería o no.. La estética de la instalación es espectacular con la tubería exacta.

    • @amonraa71
      @amonraa71 4 місяці тому +1

      Min 2 meter

    • @WildersDavid1
      @WildersDavid1 2 місяці тому

      2 m min

  • @positivevibes-gz4gy
    @positivevibes-gz4gy 2 роки тому +32

    Just so you know you drilled the hole on the wrong side. If you ever need to service the evap head you won't be able to pull the head away from the wall.

    • @mountainklima5602
      @mountainklima5602 2 роки тому +3

      I know what you mean , but the wall is very slim , you can check it from the outside you can see it in 1;21 it comes out

    • @MarcelHVAC
      @MarcelHVAC 2 роки тому

      no

    • @hunyadijanos7678
      @hunyadijanos7678 2 роки тому

      Get 60cm pipping. Nice.

    • @electricaloneonone
      @electricaloneonone Рік тому +2

      It doesn't actually make a difference what side the hole is on 🙂 if you are going to pull it off the wall, you'll have to disconnect the refrigeration pipes anyway 🙂

    • @MarcelHVAC
      @MarcelHVAC Рік тому +1

      @@electricaloneonone You are right

  • @patascaprina
    @patascaprina Рік тому +1

    Y que pasó con la bomba de vacío para sacar la humedad de la cañeria y el manometro para estar seguro de la presión adecuada? Y como le harás la mantención después con esos equipos tan pegados a la pared???, Y los desagüe se los llevaron en la camioneta?...

  • @KingKhan-if6oq
    @KingKhan-if6oq 2 роки тому +1

    Amizing,. But why the excletr of Elictrical down with outdoor, when u serviceing the unit the water can demage it,.

  • @joelferreira4020
    @joelferreira4020 Рік тому +4

    Great job. Could you please tell me who sells the articulated cable trunking in europe that they put in the exterior unit?

  • @kiantracker1499
    @kiantracker1499 2 роки тому +1

    Hi. Best regards, refrigeration and air conditioning technicians. Greetings from Indonesian technicians.

    • @ozanbrooks
      @ozanbrooks 5 місяців тому

      makasih maseh, mongo mongo, hati hati, sampai jumpa,nasi goreng, sate sate

  • @bluecollardownunder3616
    @bluecollardownunder3616 2 роки тому +6

    Have you ever install multi split before?

  • @mikepict9011
    @mikepict9011 2 роки тому +1

    Their like a useful version of a scientist

  • @jivazzieraspiazu3762
    @jivazzieraspiazu3762 2 роки тому +12

    Una consulta dónde están los 3 metros de tubería que pide como mínimo el fabricante

    • @welitonbruscato
      @welitonbruscato 2 роки тому +1

      Parece que não tem. Ou possa ser que as normas do fabricante mude 😬😬

    • @kayyumkhan7255
      @kayyumkhan7255 2 роки тому

      Hasankhan

    • @ivaneduardovelazquez6489
      @ivaneduardovelazquez6489 2 роки тому

      Para que o que igual mejor así

    • @JesusRuiz-ro1sh
      @JesusRuiz-ro1sh 2 роки тому

      Por donde avacua el agua del compresor🤭a tuti pley, ni los mas profesionales son profesionales, menuda caca

    • @JesusRuiz-ro1sh
      @JesusRuiz-ro1sh 2 роки тому

      Y dejar la caja de corriente justo por donde tira el agua el compresor

  • @PTBS_Ortega
    @PTBS_Ortega 2 роки тому

    Sieht schob nice aus. Aber warum nicht auf‘s Dach mit den AG‘s?

  • @jaimebernabesanchezparedes4234
    @jaimebernabesanchezparedes4234 2 роки тому +3

    Saludos cordiales colegas
    Yo Realizó o hago el pasado de las CAÑERÍAS de gas y líquido x el lado izquierdo
    Ojo pará poder dar el buen mantenimiento

  • @JasonNYC5454
    @JasonNYC5454 2 роки тому +3

    Neat job. I guess electrician have to supply power to the disconnect switch box.

  • @Adreesuploads
    @Adreesuploads 7 місяців тому +1

    Any videos on how to replace a compressor on these units or simar units like this one ..my air conditioner isn't letting out really cold air so I'm assuming the gas in compressor needs refill or replaced the unit is about 7 years old and only been used mostly in the summer doest the compressor be in the unit inside or the fan on the outside?

  • @sreejithts9798
    @sreejithts9798 2 роки тому +9

    good technician doing perfect work in proper way

    • @ramonvenegas7644
      @ramonvenegas7644 2 роки тому

      Good technicians don't work on ladders, platform ladders are for that..

    • @5885ronny
      @5885ronny 2 роки тому

      Gut 👍

  • @OVEDI-PULL_UP
    @OVEDI-PULL_UP Місяць тому

    Muy bueno el video, con profesionales mejor. Enhorabuena

  • @welitonbruscato
    @welitonbruscato 2 роки тому +6

    Olá amigos, ótimo trabalho parabéns. Só uma dúvida, midea não tem um mínimo de Tubulação para ser executado a instalação.?
    Forte abraço amigos trabalho de vocês é excelente parabéns

    • @micboy22
      @micboy22 2 роки тому +2

      Cara Pensei a mesma coisa duvido que ali tenha 3 metros mínimo

    • @welitonbruscato
      @welitonbruscato 2 роки тому +2

      @@micboy22 tem 50 cm 😂 😂 😂 😂 mas...

    • @rodrigooliveira5034
      @rodrigooliveira5034 2 роки тому +2

      Outro detalhe que achei incoerente é essa tubulação sendo curva 90⁰ após atravessar a parede na prática roda vez que for necessário retirar o aparelho para preventiva terá que desfazer essa curva o que num futuro não tão distante causará a quebra da tubulação,pelo menos eu não gosto de instalar dessa maneira

    • @eng.paulocesar1524
      @eng.paulocesar1524 2 роки тому

      Uma das piores práticas de instalação, pensando em garantia do equipamento e manutenção... instalação sem respeitar a distância mínima, e ainda dobra o tubo da maquina pra fora, numa manutenção precisa desinstalar o equipamento e ainda corre o risco de trinca na tubulação da evaporadora, muito ruim, pensando em acabamento não a o que se discutir, mas qualidade técnica ai... é 0.

    • @СаидМагомедов-г4я
      @СаидМагомедов-г4я 2 роки тому

      @@rodrigooliveira5034 можно за паять

  • @ACFactoryChina
    @ACFactoryChina 26 днів тому

    ❤❤❤Greetings from the air conditioner manufacturer from China

  • @maestrovso
    @maestrovso 2 роки тому

    Single zone systems are the easier to install. Even a child can do it. Try installing a multizone like one that supports up to 8 IDUs. I am a homeowner and just done installing a 5 tons LG multizone, in a 4000 sq ft commercial steel building that is my hobby garage. I don't trust any professionals. I bought my first mini split back in late 90s in US when there was none other brand beside Mitsubishi Mr. Slim. Today, LG is way ahead.

  • @ivan-qb5fd
    @ivan-qb5fd 2 роки тому +1

    Poco más y conectan directamente la tubería que viene del Split la compresor, a eso se le llama ahorrar tubería y además por el lado derecho en vez de por la izquierda para posibles averías y mantenimientos...

  • @manishmonu26
    @manishmonu26 2 роки тому +1

    Nice installation 👍 I am from Punjab. 🇮🇳

  • @tolgacoban5411
    @tolgacoban5411 Рік тому

    It is recommended to use at least 3 meters of pipe. Why didn't you use it?

  • @josemariatorroglosatroyano766
    @josemariatorroglosatroyano766 2 роки тому +4

    Buenas noches que lastima de hechar a perder la fachada del edificio poniendo los compresores ahí está muy fácil subirlos al azotea de la vivienda y el sacar los tubos de la línea de frío por el lado de la derecha como que no es lo más correcto.

    • @alexsalazar5028
      @alexsalazar5028 2 роки тому

      Por la izquierda es un poco mas tardado
      Pero es mas facil para desmontar
      La unidad en caso de necesitar mantenimiento

    • @azrael834
      @azrael834 3 місяці тому

      👍

  • @pradeepshetty2911
    @pradeepshetty2911 2 роки тому +1

    Sorry brother wrong installation. You should make that hole in left side of indoor unit wall . You only thinking about installation, what about future servicing , if we need to remove ac again we have to break the wall again.

  • @manueld.3982
    @manueld.3982 2 роки тому

    Why don't you put the external machines on the roof, where you don't see them.?

  • @dadosdados47
    @dadosdados47 2 роки тому +5

    Without oil trap and 3m steel pipe and without vacuum pump?why?

    • @hanghad7645
      @hanghad7645 2 роки тому +1

      The lines come prefilled with refrigerant

    • @mountainklima5602
      @mountainklima5602 2 роки тому +1

      you dont need oil traps for r410 unless the 2 units are very high apart

    • @dadosdados47
      @dadosdados47 2 роки тому

      @@mountainklima5602 ,if inside unit is under from the outside is nessesary oil trap for the machine to work good for long time.this will have problems after years

    • @mountainklima5602
      @mountainklima5602 2 роки тому +1

      @@dadosdados47 Because R-410A and POE oil mix so well together, oil-trap installation is generally not required on R-410A systems. However, technicians should always be sure to seal refriger- ant lines by crimping them closed and brazing them if they will be exposed to the atmosphere for any length of time.When an HVAC system uses POE (Polyolester) oil, which is typical of current R410a systems, suction oil traps are not required* because POE is miscible in R410a in all phases (liquid, saturated liquid and vapor)

    • @dadosdados47
      @dadosdados47 2 роки тому

      @@mountainklima5602 in your world these maybe exists,not mine friend!

  • @jaideepsethi4278
    @jaideepsethi4278 2 роки тому

    Great work technicians. Come and see how indian ac technicians work ridiculously.

  • @sergiodave6497
    @sergiodave6497 2 роки тому +5

    No respetan los 3 metros de cañería que piden por garantia

    • @darielpozo8209
      @darielpozo8209 2 роки тому +1

      Cómo así??, explica eso.

    • @oliveii_1391
      @oliveii_1391 2 роки тому +1

      Achei que apenas no Brasil que não respeitavam, isso é no mundo todo.

    • @welitonbruscato
      @welitonbruscato 2 роки тому

      @@oliveii_1391 e mundial 😂 😂 😂 😂 😂 aqui o lema é o importante gelar, lá tmb 😂 😂 😂 😂 no investimento que eles tem pelo menos o mínimo deveria ter de Tubulação

    • @EsdrasCirqueira
      @EsdrasCirqueira 2 роки тому +1

      Varia de marca pra marca alguns são 03 metros outro 02 mts outros acima de 04mts importante é gelar o.probelma não a tubulação é sim o excesso de gás que fica na máquina pra distância de tubos a menos

  • @鄭言-c8h
    @鄭言-c8h 2 роки тому +1

    室外機要比室內機低!停機後內部冷凍油才會流回室外機!室外機裝那麼高保養散熱鰭片也不方便!

  • @maxwellpsilva
    @maxwellpsilva 2 роки тому +1

    One observation: the copper tubes between evaporator and condenser less than 3 meters and connection out side.

    • @65416546513213513213
      @65416546513213513213 2 роки тому

      pense en lo mismo

    • @darkfrost999
      @darkfrost999 Рік тому

      for some ac it can work at 2 meter minimum, but this is less than that, it's about 1.5 meter i dont know is it ok for the ac or not

  • @escuelacerogrados
    @escuelacerogrados 2 роки тому +4

    Do you recover refrigerant when you cut the line set?

  • @Ghostriderz911
    @Ghostriderz911 2 роки тому

    Arent you supposed to have at least 10ft of lineset? Also not a fan of suspended condensers

  • @nazelmenesisjr1620
    @nazelmenesisjr1620 2 роки тому

    Why like that always outside flare nut defficult miantenace for do general service..install very easi maintenance problem

  • @magolegend4985
    @magolegend4985 2 роки тому +1

    The copper tube is below 10ft. which is causing a substandard flow of refrigerant...thats not good for the aircon unit.

  • @roypjohno8118
    @roypjohno8118 2 роки тому

    Hai Good Morning Super Ac fitings Super job Super idea Super Spead work 👍👍👍👍👍👌👌👌👌👌

  • @mohsenpanahi6773
    @mohsenpanahi6773 Рік тому

    May the God give you the strength.

  • @MegaJawaMan
    @MegaJawaMan 2 роки тому

    I like it. This house was very nice. But now it si perfect 😍

  • @rodrigobritos7342
    @rodrigobritos7342 2 роки тому

    Terrible laburo lo único que faltó o no grabaron fue el vacío al equipo

  • @lilheng1694
    @lilheng1694 Рік тому

    They're so professional and handsome👍

  • @haniffhaniff5764
    @haniffhaniff5764 2 роки тому

    I need to lift my sinking house but my outdoor unit is placed on the ground. Do I absolutely need to decommission the outdoor unit before lifting the wall? I only need to lift the wall by 7cm or max 10cm. Can I just lift the outdoor unit slowly as I lift the wall?

    • @ДенисГриненко-ф3с
      @ДенисГриненко-ф3с 2 роки тому

      Надеюсь google translate поможет тебе прочесть. Если позволяет длинна медной трубки, то ты можешь аккуратно перенести его выше, лучше делать это с напарником, но лучше вызови профессионалов .

  • @nicklaurencemanangan778
    @nicklaurencemanangan778 Рік тому

    Why breaker is installed below the condenser? not beside..

  • @petertoth1808
    @petertoth1808 Рік тому

    good work.what the flexible air conditioner channel?thx

  • @loiquach9061
    @loiquach9061 2 роки тому

    Bạn làm vậy không thể đạt 3 mét ống như nhà sản xuất yêu cầu

  • @zambalisticofficialtv4615
    @zambalisticofficialtv4615 2 роки тому

    Why do they install the aircon next ton the window and doors.

  • @cosimosantoro2994
    @cosimosantoro2994 2 роки тому

    I manometri abbiamo visto ma nn abbiamo visto cm avete fatto il vuoto all'interno dell'impianto

  • @localflorida2201
    @localflorida2201 2 роки тому

    The electric box right under the unit where condense... very smart..🤭🤭.
    Another deficiency. Warranty avoid.

  • @vodnok
    @vodnok 2 роки тому

    Nice house with nice color and stone that are totaly ruined by this... Why not putting the ouside unit on the flat roof ?

  • @princehlengsizwesayi547
    @princehlengsizwesayi547 Рік тому

    Not happy on the isolator under the outdoor unit
    Heating mode water drip what's next

  • @cookingwhitme6444
    @cookingwhitme6444 2 роки тому

    Apologies, behind the outdoor unit need to hawe one circle ⭕️ and then you conekt the instalation.

  • @tamilarasan-gm1lr
    @tamilarasan-gm1lr 2 роки тому +1

    Very good finishing

  • @higorguimaraes8508
    @higorguimaraes8508 Рік тому

    La tubulacion no está curta?

  • @ip5232
    @ip5232 Рік тому

    I know it was the landlord choice but it was so close to be install on the roof and out of sight why not?!!😊

  • @fanismitsios2450
    @fanismitsios2450 11 місяців тому

    Hello, how long did it take to install both air conditioners

  • @242topboss
    @242topboss 2 роки тому

    Nice work , Love it … where did you purchase work shirts from?

  • @KumarKumar-zh7fe
    @KumarKumar-zh7fe 2 роки тому +1

    Your work good finished

  • @2marooni
    @2marooni 5 місяців тому

    There is no minimum 3 meters of copper pipe? Work no good

  • @uio86a
    @uio86a 2 роки тому

    Which country? The sky is so pretty

  • @cephasabani2227
    @cephasabani2227 Рік тому

    Wow I just need where someone is installing

  • @carlosschmidt6035
    @carlosschmidt6035 Рік тому +1

    An excellent and Beauty installation

  • @fernandpoungs8719
    @fernandpoungs8719 2 роки тому

    Bonjour s'il vous plaît puis je avoir le code de défaut des climatiseurs MIDEA

  • @prasadsharma26
    @prasadsharma26 2 роки тому +3

    Ur work super 🙏

  • @antoniobellantuoni5452
    @antoniobellantuoni5452 2 роки тому

    Bravi colleghi...saluti da italia

  • @altyndom7039
    @altyndom7039 2 роки тому +3

    Great install just needs to upload Timelapse on how the mold grows inside the head units over the years.

  • @aljrunasgarali8152
    @aljrunasgarali8152 9 днів тому

    What is the tool used to make that hole

  • @ijazghani312
    @ijazghani312 2 роки тому +11

    Isolater switch should be away from outdoor unite because if you wash the unite the water will effect the switch.
    Safety first

    • @MarcelHVAC
      @MarcelHVAC 2 роки тому +1

      no

    • @electricaloneonone
      @electricaloneonone Рік тому +1

      That depends if your isolater switch is waterproof or not 😉

    • @richarda.valdes1197
      @richarda.valdes1197 Рік тому +1

      It’s in a wheather proof box that’s designed to prevent moisture from affecting the inner works.

    • @richarda.valdes1197
      @richarda.valdes1197 Рік тому

      I’d like to know what the customers have to say about this brand ?

  • @shiven7841
    @shiven7841 2 роки тому

    Very neet and clean work

  • @Kauleas
    @Kauleas 2 роки тому +1

    how much does a split install like this cost? what country?

  • @JoseMiguelCelisCalderón
    @JoseMiguelCelisCalderón Рік тому

    Good friends. You know that if you cut the air conditioning pipe, it automatically loses warranty.

  • @wilfriedpascal5922
    @wilfriedpascal5922 Рік тому

    On perçe à gauche et non à droite. Une si belle façade gachée par deux unités quel dommage. pourquoi pas mettre un bi-split plutot.

  • @marioalbertohernandezrosas2468
    @marioalbertohernandezrosas2468 2 роки тому

    Hubieran puesto las condensadoras en el techo, le quitaron la vista a los acabados de la casa.

  • @cristianfondati7432
    @cristianfondati7432 2 роки тому

    Porq le sacan el frente y el deflector en tantisimos aires colocados por mi nunca hice eso me parece muy tonto

  • @kidsgamestuido
    @kidsgamestuido 8 місяців тому

    But A/C Have Mideas OEM For Other names A/C

  • @ptsmotoadventures
    @ptsmotoadventures 2 роки тому

    Great Job, Nice Powertools

  • @basstec2004
    @basstec2004 2 роки тому

    NAH, I WOULD ADVISE THE CUSTOMER TO SET ALL CONDENSER ON THE ROOF FOR EASIER ACCESS, CLEANING AND MAINTENANCE AND NEATER IN APPEARANCE OF THE HOUSE TOO..THAT'S JUST ME!

  • @JovanMiletic-t7b
    @JovanMiletic-t7b 3 місяці тому

    great work 👍👏

  • @moeezsiddiqi9864
    @moeezsiddiqi9864 Рік тому +2

    Great Work You My Teacher👍

  • @francisjosephorocio5615
    @francisjosephorocio5615 2 роки тому

    How to apply i am interested im aircon techniciann 4years grad in HVAC-RT

  • @tamilarasan-gm1lr
    @tamilarasan-gm1lr 2 роки тому +1

    Perfect finishing

  • @trytodosm
    @trytodosm Рік тому

    pro,nice teamwork

  • @royalrandomness777
    @royalrandomness777 Рік тому

    Midea or Daikin? Which do you prefer?

  • @johnfalcones9463
    @johnfalcones9463 Рік тому

    Hi bro , where it’s the compay ?

  • @HelloMTRS
    @HelloMTRS 2 роки тому +2

    Nice work 👍

  • @naushadahmed05
    @naushadahmed05 2 роки тому

    how to service outdoor if ur ac power box under outdoor 😇 and conditions minimum 3 metres coper pipe...😂

  • @joseszilak1717
    @joseszilak1717 Рік тому

    Todo muy lindo, pero se olvidan que el aceite del compresor va a ir directamente a la unidad interna, haciendo que el rendimiento del equipo no sea el optimo, ademas de no cumplir con las reglas de intalacion de cañeria minima de 3 metros, segun manual....... Todo muy lindo muchachos, pero......

  • @rajbiswas1762
    @rajbiswas1762 2 роки тому +3

    Very good work 👍

  • @julioalvarez6683
    @julioalvarez6683 2 роки тому

    I want to see a video of multiple zone installations

  • @Qicpal
    @Qicpal Рік тому

    Why put machine so high?

  • @lugal3193
    @lugal3193 Рік тому

    Why not multisplit?

  • @peppermeat8059
    @peppermeat8059 Рік тому

    is this for like a rent home?

  • @jon3862
    @jon3862 Рік тому

    Looks like professional

  • @Surinder_
    @Surinder_ 2 роки тому +1

    What price of one ac installation?

  • @dhirajdeshmukh3853
    @dhirajdeshmukh3853 Рік тому +1

    Which drill machine used

  • @jjbsrefairconservices3100
    @jjbsrefairconservices3100 2 роки тому

    Good luck and God bless

  • @myHombre
    @myHombre 2 роки тому

    Is that fast or fast forward.?

  • @msbaglobalengineering
    @msbaglobalengineering 2 роки тому +1

    Good job

  • @terrysookhoo2528
    @terrysookhoo2528 2 роки тому

    Its been years I haven't see trunking like those

  • @rahathasan1035
    @rahathasan1035 Рік тому

    I need this drill machine and need round wall bit

  • @СергейПерешивко-ш8я

    А маслосъёмную петлю разве не надо делать ?????? Я конечно понимаю что блоки на одном уровне и можно на это забить . Но желательно за блоком петельку то и сделать ……

  • @joseszilak1717
    @joseszilak1717 Рік тому

    All very nice, but they forget that the oil from the compressor will go directly to the internal unit, making the equipment's performance not optimal, in addition to not complying with the rules for installing a minimum pipe of 3 meters, according to the manual ....... All very nice guys, but......

  • @mariusztom2899
    @mariusztom2899 Рік тому

    What model of air conditioning is it ?