The Secret To Stop Burning Out Plasma Cutter Tips

The secret to stop burning out plasma cutter tips is very simple .If you are anything like me when I first started plasma cutting with my cheap cut 50 plasma cutter I would try and cut the thickest metal I could find just to see if it would work? But there is an art to using a plasma cutting machine you don't just want to dive in and start cutting without knowing a little about how the machine works especially the consumables because you can burn out your tips and electrodes very fast if you don't hold your plasma torch on the correct angle. My torch is a pt-31 that runs very cheap consumables but you can still be spending a lot more money than needed if you don't do it right. So if you are wanting to cut thick steel never try and blow a hole straight down through it always start on an angle or better still start by drilling a hole to start cutting from. Checkout my channel for more plasma cutter troubleshooting tips.
My amazon links and reviews of machines below
If your in the market for a great plasma cutter Checkout my best plasma cutter choices that I have reviewed .
Flame Weld 50 amp Plasma Cutter Review : • Pilot ARC Plasma Cutte...
Flameweld 50 Amp Machine : amzn.to/3D7MSCR
Bestaec Machine : amzn.to/3Vzw270
PLC 55 pro Machine : amzn.to/3CLfL6g
PLC 55P Pro Pilot Arc Plasma Cutter (CNC capable) Review : / zx5ixu96ga

[@morrismurray3621]

Thanks, as a newby for plasma cutting this told me a lot.

[@petestools]

No worries!

[@robertdavison56]

Great advice Pete. Just bought my first plasma cutter so cannot wait to use the darn thing! 👍

[@petestools]

Hope you enjoy it!

[@user-nm3tr8rk2j]

I always drill a pilot hole first & with reference to the short clip about ill-fitting tips I tried the m4 washer thing but I ended up using a m5 brass washer instead as the plasma torch head is brass as well.

[@petestools]

cool tip thanks

[@danielboughton3624]

Great examples and walkthrough. 10mm is about 3/8". I have a mix with old cars/tractors and some newer stuff.

[@petestools]

Nice

[@ProudMary53]

Some really good tips Pete.

[@petestools]

Ta

[@jacadaxray]

You have to much fun doing this :)

[@petestools]

Hi, no point doing it if you don't have fun

[@garyyorke1080]

Yee haaaa .. been a while since I saw one of your inspirational videos lol... what are on about with this read the manual thingy lol ..I just love the way that you tell it as it is and wreck a fair few bits in the process and burn ya fingers in the most obvious way lol . Thanks for the giggle Pete .

[@petestools]

Hi Gary , You have to be a little crazy theses days my friend otherwise you would go nuts lol.

[@garyyorke1080]

@@petestools only a little lol . Great to see ya videos again and yup great tips on the plasma consumable

[@3rdpig]

Pete, are you suggesting that people should do some research and learn the process before they fire the machine up and wreck stuff? That's asking a lot. Do that same thing with a gas ax and you'll wind up with a face full of molten metal. Pain is a great teaching tool.

[@petestools]

Ha-Ha agree Chuck .Can but try.

[@brianholland2916]

G-day

[@petestools]

hi mate

[@cjbilly345]

Great advice, but I'm still not going to read the owners manual

[@petestools]

Why not? lol

[@spottedquolloz]

Pete you need real dry air to stop blowing up tips.

[@petestools]

Yea mate that as well , but blow back is worse mate.

[@brentsmith3996]

The man is brilliant thank you 💓👀👀👀👀👀👀👀👀👀👀👀👀👀👀👀😎😃😃😃😃😃👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@petestools]

cheers mate