HOW TO REPAIR THE BRAKE LIGHT SWITCH OF ANY CAR (SENSOR OR STOP SWITCH)

Поділитися
Вставка
  • Опубліковано 10 сер 2023
  • I teach you how to repair the brake light switch of any car, also called a sensor, bulb or stop switch, watch this tutorial until the end and you will be able to do it yourself very easily and quickly, and you will also save a lot of money.
    In this case I am going to repair the brake light switch on a Nissan Tiida but it is the same procedure on other car brands.
    The function of the brake light sensor is to send a signal to the computer when the brake pedal is pressed and with that reading it decreases the engine speed and also turns on the rear taillight bulbs to indicate to other drivers that the car is slowing down or coming to a complete stop.
    When the brake light switch is already damaged, the following faults will occur in the car: loss of engine power, the brake lights stay on at all times or do not come on, the car remains braked, the brake lever changes cannot be moved in automatic transmissions and the yellow check light on the instrument panel comes on and when a scanner is inserted, the fault code p1805 appears.
    To solve the failures caused by the brake light switch you have to do the following: check the fuse, check that the cables are not broken and check that the harness is not broken, clean the sensor with an electrical component cleaner or repair it and change the sensor because it is short circuited or already damaged.
  • Авто та транспорт

КОМЕНТАРІ • 42

  • @raulpizarro7868
    @raulpizarro7868 5 місяців тому +8

    Lo acabo de reparar así tal cual y funcionó espectacular!!!! Muchas gracias!!!

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  5 місяців тому +1

      Que bueno que te sirvió; por favor suscríbete a mi canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @alfrdocaballeonava9658
    @alfrdocaballeonava9658 4 місяці тому +4

    Felicidades pues la forma de enseñar es la mejor que e visto todos repiten y repiten y al final no entendemos

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  4 місяці тому

      Que bueno que te gustó, ojalá te sirva en algún momento; por favor suscríbete a mi canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @disneyduque6704
    @disneyduque6704 7 днів тому

    Excelente información muchas gracias 🎉

  • @juanvalles1029
    @juanvalles1029 3 місяці тому +2

    Excelente como todos tus videos...Saludos desde Venezuela...¡¡¡¡¡¡¡

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  3 місяці тому

      Que bueno que te gustó, ojalá te sirva en algún momento; por favor suscríbete a mi canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @stevenvillalobosgonzalez8605
    @stevenvillalobosgonzalez8605 6 місяців тому +3

    Gracias acabo de arreglar mi carro con su video

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  6 місяців тому

      Que bueno que te sirvió; por favor suscríbete a mi canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @josefranciscoesquertalaman3827
    @josefranciscoesquertalaman3827 11 місяців тому +2

    Presente en clases desde Navojoa Sonora México gracias por compartir información sobre mecánica automotriz

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  11 місяців тому

      Que bueno que te gustó, ojalá te sirva en algún momento; por favor suscribete a mí canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @gilbertoalarcon5958
    @gilbertoalarcon5958 10 місяців тому +3

    Excelente información, se lo hice a un spark classic 2016, y super bien, asunto arreglado

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  10 місяців тому

      Que bueno que te sirvió; por favor suscríbete a mi canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @rogermorales1815
    @rogermorales1815 4 місяці тому +1

    Excelente tutorial. Mis respetos para UD y la forma de enseñar. Mil gracias

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  4 місяці тому

      Que bueno que te gustó, ojalá te sirva en algún momento; por favor suscríbete a mi canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @user-oo3jv1wi8c
    @user-oo3jv1wi8c 11 місяців тому +1

    Quedo pendiente a la pregunta anterior 👍

  • @jeroelgabo2
    @jeroelgabo2 4 місяці тому +1

    no se ve complicado, lo voy a intentar 😅

  • @jaimeginozakobashikawa6319
    @jaimeginozakobashikawa6319 2 місяці тому

    EXCELENTE, GRACIAS MAESTRO...

  • @JusticeEnGarde
    @JusticeEnGarde 5 місяців тому

    Gracias por el tip
    Saludos

  • @mauriseta62
    @mauriseta62 8 місяців тому +1

    Gracias x su video aprendí mucho así deberían ser los videos

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  8 місяців тому

      Que bueno que te sirvió; por favor suscríbete a mi canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @franciscocardonaguillermo250
    @franciscocardonaguillermo250 3 місяці тому +1

    Excelente...gracias por compartir...!!!

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  3 місяці тому

      Que bueno que te gustó, ojalá te sirva en algún momento; por favor suscríbete a mi canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @josevidalramirezg7088
    @josevidalramirezg7088 11 місяців тому +1

    Gracias que buen consejo

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  11 місяців тому +1

      Que bueno que te gustó, ojalá te sirva en algún momento; por favor suscribete a mí canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @user-bx5np3lh3w
    @user-bx5np3lh3w 10 місяців тому +1

    Buen video amigo. Espero que si me ayude. Saludos

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  10 місяців тому +1

      Realiza el procedimiento de éste vídeo y volverá a funcionar correctamente el sensor de las luces de freno; por favor suscríbete a mi canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @Argo321
    @Argo321 3 дні тому +1

    Procedí con el de Renault Twingo y no pude desmontarlo. Gracias, buen contenido.

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  3 дні тому

      @@Argo321 utiliza una franela para que no se te resbale el interruptor y presionalo y haz un medio giro a contrareloj y ya sale; por favor suscríbete a mi canal y sólo ayúdame viendo los anuncios de mis videos, saludos

    • @Argo321
      @Argo321 2 дні тому

      @@MUNDOMEXICANO.AUTOS-Y-MAS gracias

  • @user-oo3jv1wi8c
    @user-oo3jv1wi8c 11 місяців тому +4

    Hola buen día
    Por esta falla es normal que se quedan prendidas las luces de stop todo el tiempo
    O esto puede ser relacionado a otra causa?
    PD. Por otro lado comentar que su canal me ha apoyado en muchas ocasiones con respecto a la línea tida👍

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  11 місяців тому +1

      Si es una falla de éste sensor, ve bien éste vídeo; por favor suscribete a mí canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @elnenenene6354
    @elnenenene6354 6 місяців тому +1

    Muy buen video Y cuando sale el P 0504

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  6 місяців тому +1

      Debes revisar que no estén rotos el arnés y los cables del interruptor de freno, también realiza el procedimiento de éste vídeo o cambia el interruptor de freno; por favor suscríbete a mi canal y sólo ayúdame viendo los anuncios de mis videos, saludos

    • @elnenenene6354
      @elnenenene6354 6 місяців тому +1

      @@MUNDOMEXICANO.AUTOS-Y-MAS Muchas Gracias

  • @Alejandro-in4dq
    @Alejandro-in4dq Місяць тому

    Mi tiida no encienden las luces traceras, pero al mover el arnes ó enchufe se encienden. Seguí todos tus pasos y al conectar los cables empieza a bajar hasta llegar a 0.000 y se escucha el sonido de continuidad

  • @eliomontielleon5546
    @eliomontielleon5546 28 днів тому +1

    saludos amigo tengo un ford focus 2005 y saque ese sensor para probar la continuidad con el multimetro y el suena es uado presiono el interruptp osea deberia sonar al reves verdad?? eso quiere decir que esta malo o en corto??

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  28 днів тому

      Si, éste es el vídeo: m.ua-cam.com/video/4WAHgHC0fr4/v-deo.html&pp=ygUmcHJvYmFyIGludGVycnVwdG9yIGRlIGx1Y2VzIGRlIHJldmVyc2E%3D por favor suscríbete a mi canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @PACMAANR
    @PACMAANR 10 місяців тому

    Pendiente a su respuesta

  • @PACMAANR
    @PACMAANR 10 місяців тому +1

    A mi tiida NO le encienden las luces traseras ni cuartos de enfrente
    No encienden ni con los cuartos, ni frenando, tampoco se ilumina la placa y el tablero no cambia al encender las luces
    Las intermitentes si sirven y las luces de enfrente si sirven

    • @MUNDOMEXICANO.AUTOS-Y-MAS
      @MUNDOMEXICANO.AUTOS-Y-MAS  10 місяців тому

      Ve éste video: ua-cam.com/video/4XujD7ng-b0/v-deo.htmlsi=Zel79YQZb7lFmzu0 por favor suscríbete a mi canal y sólo ayúdame viendo los anuncios de mis videos, saludos

  • @fernathetransporter
    @fernathetransporter 5 місяців тому

    Podría hacerlo en un sensor de un 2015 Lincoln MKZ?????