2013 Boss 302 Mustang With Procharger, Kooks Headers, Corsa Exhaust Revs, Cold Start, Fly Bys, POV
Вставка
- Опубліковано 10 кві 2021
- Took the supercharged 2013 Boss 302 Mustang with Kooks long tube headers, stock side pipes and loud Corsa exhaust out for a drive. Listen to the exhaust clips, cold start, revs and fly bys.
Use Coupon Code 816g for 15% off Auxito LED lighting @ auxito.com/?ref=k891o9di4t
My 2013 Boss 302 #3506:
Procharger P1SC with big red BOV
ID 1000 fuel injectors
VMP BAP
Lund Tune
Exedy clutch and flywheel
Kooks 1 7/8 long tube headers
Kooks catted H pipe
Stock Boss 302 side pipes
Corsa axlebacks
Shelby CS 56 2.0 20x9 front wheels 20x11 rear wheels
Nitto NT 555 G2 front tires
Nitto NT 555R rear tires
Dynotech one piece aluminum driveshaft
MGW race spec shifter
FRPP lowering springs (P Springs)
Roush side splitters
Carriage Works billet grille
GT 500 rear spoiler
GT 500 rear diffuser
R1 Concepts rotors
MMD hood struts
Music: epidemicsound.com
Intro: Persistence by Dylan Sitts
Outro: Highlight Reel by Dylan Sitts
#boss302exhaust #kooksheaders #corsaexhaust - Авто та транспорт
I’m going to be discussing a procharger build for my 2014 gt this week. Super stoked, and watching videos like this to stay excited. Thanks
Congrats! It'll be a lot of fun once you get everything all dialed in.
Those Kooks long tubes sound amazing.
Love the boss 302.
Awesome ride man these are becoming a classic. Haven't seen one on the road in years
Thank You!
A 2013-2014 car a classic?
Man do you have my dream setup, 674 to the wheel is pretty healthy. I loved hearing the faint whistle in the inside shots 👌🏻
Thank you, I appreciate it.
@@eight16garage I've always loved any Boss mustang. Your Boss sounds really sweet, must be a blast to drive.
@@tomkjr1 Thank you, they're a pretty unique Mustang.
Dope ass 302 brother 👍👍
Thanks man! Looks like you have a pretty sweet Mustang as well. Subscribed!
I can listen to that all day
Yes, I'm right there with you!
@@eight16garage Maybe some ZZ Top playing in the background
@@Unmarked_1 Heck Yeah!
Man I'd love to see how that set up would sound with the resonators cut out of the side exhaust. That thing would pop like cannons going off.
Thought about it but it gets pretty loud as is. I did like the growl it made when I had the Kooks side pipes on it but they just hung to low for me.
Nice. Currently looking at a 302 or C6z but the car market right now is ridiculously high
You ain't kiddin', hopefully prices come back to normal soon.
Have the same setup on my 13 Boss 302 it sounds amazing, in tunnels it sounds like thunder! Lol
Nice, that's a good way to describe it!
Question y didnt you do the apron on the garage floor? Nice Boss
Getting caught up, I want a Paxton or Procharger soooo bad
Man I hope you get one, that'd be sweet! Hopefully in the near future.
@@eight16garage probably not near future but im getting my stage 3 calimer very soon
mouth mount, you should see my spec ops type rig haha
Oh yeah, keeps me from saying anything stupid too.
😎
I want one so bad im only 13 so when i start working i better stay on that grind and then maybe ill have one 😎
Hard work will always pay off.
@@eight16garage amen to that
The wheel setup doesn’t look stock… the rear wheels seem to be wider. Beautiful PW Boss.
Thank you, it's a Shelby CS 56 2.0 wheel. Looks similar to the stock Boss wheels. 20x9 up front, 20x11 in the rear.
@@eight16garage 305’s looked too wide on the stock wheel. This is good information. I’ll look into these. Thank you.
What is it making for boost? And what is your RWHP. I know that engine has over 11-1 compression so you must be tuned for high octane gas or you got low boost pressure 😂
It's pretty common 11:1 coyotes can do 10-11 psi on 93 octane pretty easily and they make good power at that boost level because of the compression. I know it's a road runner it's essentially a factory modified coyote...it's like a gen 2 the gen 2 was derived from the boss. Gen 2 with a diff intake manifold basically.
Hey, would you mind if I use this video for my channel. I am attempting to complete a American cold start collection. You will be credited for the video. Video will be cut to just show the cold start
Go for it! I wouldn't mind at all, use whatever parts you need.
@@eight16garage thank you
@@americanmusclemaniac9565 Not a problem
What lowering springs do you have?
I've got FRPP "P" springs on the car.
Do you remember if that was corsa sport or extreme mufflers?
They were the sports
@@eight16garage Nice my brother thanks.
Anything done to the mt82 other than the MGW?
Trans is stock other than changing out the clutch and flywheel.
What mid pipe? Catted H or X?
Still running the side pipes?
Kooks catted H pipe and yep, still running the factory side pipes.
@@eight16garage Do you have the side pipe baffles in still or wide open? Only ask since I have a 12’ Boss and have been looking for an exhaust system for it. Yours is perfect and what I’m looking for.
@@HandSolo1 I took the removable baffles out where the side pipe meets up to the H pipe, other than that the side pipes are 100% stock.
@@eight16garage thank you sir! Car sounds great
@@HandSolo1 Absolutely no problem and Thank you
How much hp do these have stock
They came with 444 hp stock.
Boss 302???
lame vid of the month
No one asked you to watch it.
Ouch…..
Sweet car 816 💪🏻 I like what you did with the CS wider rims out back and center caps all around. 😉
@@ShelbyBikeBoy Thank you, I liked that wheel because it was very similar to the stock Boss wheels and also came in a size I liked better