I purchased one in the fall of 2021 and I've had lots of fun with it. I've done a few modifications to make it better like a small lift kit and bigger tires for clearance, a clutch kit to get rid of the jerkiness, installed doors and a heater with a windshield for winter use. I have close to 7000km on it and it still drives like a new bike. I would purchase another one for sure.
I have had mine now for over 12 months. I agree with the throttle being jerky and stiff gear shift. I how over 150 km on the clock and use it around the farm everyday. Problems so far, during the wet season it would not change between 2 and 4WD without lifting the bonnet and wriggling the fuse box. RP7 on the switching terminals didn’t help, it started working again in dry weather. The clutch is shocking, so jerky, I will be upgrading it, but lately it had started going into limp mode on hills with about 10kph being the top speed. I have the seatbelts plugged in and doesn’t help. It’s like the governor is on all the time. Definitely hasn’t been a trouble free 1st 12 months with this unit. If these problems can be fixed then she would be a beast.
@@UFO-35 sounds like you’ve had a bit of an rough run. I wonder what is causing the limp mode. If you’re wanting a smoother clutch, if you’re in Aus or NZ we sell the RNG clutch upgrades Restock for 600s coming this week insinct.com.au/collections/rng-clutch-kits
Thank you very much for the feedback! Yes they are good machines. Sounds great, we offer free shipping for Australia and New Zealand. If you’re not in either of those countries you can contact me below insinct.com.au/contact-us/
Thank you for the feedback! Yes got some exciting stuff in the pipeline, stay tuned! They are very handy, I was using it to round up cattle this morning. I should have another video coming within the next week or so with some more information on how it’s going 👍
Great job on your video! Your enthusiasm and creativity are really inspiring. Keep up the fantastic work - looking forward to seeing more content from you!
Great review. We bought the same model around 3-4 months ago for many of the same reasons you mentioned, it’s been a great little tool that we use daily. It gets used for everything from firewood collection, carting tools around, fencing and maintenance around our property, feeding animals, checking the mailbox, putting out and taking in rubbish bins, hunting and I even use the tray for a workbench, we love it. We’ve got a steep hilly block and have found the engine braking quite good.
@@Alan_lay thank you for the feedback! Sounds like your U600 gets a lot of use! I’ve noticed that most of the time it holds the engine break, but on a couple of occasions it’s rolled away. Can always catch it on the breaks though
@@InSinctOffroad yeah mate she gets plenty of use, we use it for a bit of fun too, just cruising and trail riding on our block. Have found it to be great on fuel too. I haven’t noticed any problems with the down hill assist on ours, as I said earlier, we’ve got quite a few steep hilly sections on our block and find the downhill assist useful, it works great when I’m rolling down the driveway or fence line with the weed sprayer, holds me at a good speed.
@@InSinctOffroad nah mate, I just mean the engine braking, I think they (CFMOTO) call it electronic hill descent assist or something along those lines….
@@Alan_lay ahh okay, I’ve seen that written in their marketing material and was wondering if there was something you had to do to engage it. It’s probably harder for it to do its job on less steep hill, which is where I’ve had it run on a bit. Might not be able to differentiate if it’s on a hill or not
great review, one of the best i've seen. just ordered the same and can't wait to try it out. keep up the good work and look forward to seeing more updates from you. cheers
I just got my 600 delivered 2 weeks ago. So far I love it but yes it's loud in the cab . Where can I buy the rear bumper and seat covers? Thanks for the great video.
@@waydeblank2375 thank you for the feedback! are you based in Australia? I can supply the seat covers for you, the rear bumper is a genuine cfmoto one that came with the hunt version. If you can drop me a message via our website, I can let you know pricing for the seat covers insinct.com.au/contact-us/
I replied to your comment but don’t think UA-cam let it go in. Anyway 23 and 24 models do appear to come with panels for the storage area. Just look up the year and uforce 600 interior and you’ll get load of pictures of them. I’d ask the dealership, maybe they forgot to put them on.
I guess it depends on the market, and availability etc. In Australia they don’t, I spoke to the dealer. Not sure if you seen the ones we put together at the end of the video, they are aluminium not plastic and also come with a panel for the middle section 👌
@@InSinctOffroad nice, yeah the ones I see here in Canada and on the USA ones are plastic. I looked them up on CFMoto’s website after in the parts list for replacing, they’re over $20 per side to replace them here in Canada. I’m hoping next year to get a 600, gonna try and save up to get the full cab enclosure with wiper kit and heater 1st before looking into financing one. Quad isn’t so fun once you get into the colder seasons lol.
@@HITMAN934 I can imagine a full cabin would be very handy in those conditions! Hope to do some products for the quads as well in the future but for now will focus on the utvs
What year is your 600 ? I’m pretty sure 23 and 24’s have a plastic paneling for the storage area from pictures I’ve seen. May want to take to your dealer, who knows maybe they forgot to install them ?
I purchased one in the fall of 2021 and I've had lots of fun with it. I've done a few modifications to make it better like a small lift kit and bigger tires for clearance, a clutch kit to get rid of the jerkiness, installed doors and a heater with a windshield for winter use.
I have close to 7000km on it and it still drives like a new bike. I would purchase another one for sure.
@@davidcaissie7719 great to hear stories like this! Sounds like yours is fully kitted out
I have had mine now for over 12 months. I agree with the throttle being jerky and stiff gear shift. I how over 150 km on the clock and use it around the farm everyday. Problems so far, during the wet season it would not change between 2 and 4WD without lifting the bonnet and wriggling the fuse box. RP7 on the switching terminals didn’t help, it started working again in dry weather. The clutch is shocking, so jerky, I will be upgrading it, but lately it had started going into limp mode on hills with about 10kph being the top speed. I have the seatbelts plugged in and doesn’t help. It’s like the governor is on all the time. Definitely hasn’t been a trouble free 1st 12 months with this unit. If these problems can be fixed then she would be a beast.
@@UFO-35 sounds like you’ve had a bit of an rough run. I wonder what is causing the limp mode. If you’re wanting a smoother clutch, if you’re in Aus or NZ we sell the RNG clutch upgrades
Restock for 600s coming this week
insinct.com.au/collections/rng-clutch-kits
Great review I have a 2023 CF Moto uforce 600EPS and love it! Will be buying the tray holders from you too and look forward to more of you add ons.
Thank you very much for the feedback! Yes they are good machines. Sounds great, we offer free shipping for Australia and New Zealand. If you’re not in either of those countries you can contact me below
insinct.com.au/contact-us/
Hi mate. Great review. Looking forward to your add ons to the interior. Well done. Im looking at one of these myself.
Thank you for the feedback!
Yes got some exciting stuff in the pipeline, stay tuned!
They are very handy, I was using it to round up cattle this morning. I should have another video coming within the next week or so with some more information on how it’s going 👍
Great job on your video! Your enthusiasm and creativity are really inspiring. Keep up the fantastic work - looking forward to seeing more content from you!
Great review. We bought the same model around 3-4 months ago for many of the same reasons you mentioned, it’s been a great little tool that we use daily. It gets used for everything from firewood collection, carting tools around, fencing and maintenance around our property, feeding animals, checking the mailbox, putting out and taking in rubbish bins, hunting and I even use the tray for a workbench, we love it. We’ve got a steep hilly block and have found the engine braking quite good.
@@Alan_lay thank you for the feedback! Sounds like your U600 gets a lot of use! I’ve noticed that most of the time it holds the engine break, but on a couple of occasions it’s rolled away. Can always catch it on the breaks though
@@InSinctOffroad yeah mate she gets plenty of use, we use it for a bit of fun too, just cruising and trail riding on our block. Have found it to be great on fuel too. I haven’t noticed any problems with the down hill assist on ours, as I said earlier, we’ve got quite a few steep hilly sections on our block and find the downhill assist useful, it works great when I’m rolling down the driveway or fence line with the weed sprayer, holds me at a good speed.
@@Alan_lay when you say downhill assist is there something you need to switch on for that?
@@InSinctOffroad nah mate, I just mean the engine braking, I think they (CFMOTO) call it electronic hill descent assist or something along those lines….
@@Alan_lay ahh okay, I’ve seen that written in their marketing material and was wondering if there was something you had to do to engage it. It’s probably harder for it to do its job on less steep hill, which is where I’ve had it run on a bit. Might not be able to differentiate if it’s on a hill or not
great review, one of the best i've seen. just ordered the same and can't wait to try it out.
keep up the good work and look forward to seeing more updates from you. cheers
Thank you!
Props to anyone who can spot the new product we are testing in this video 😉
Drop a comment if you liked the content 👍
I just got my 600 delivered 2 weeks ago. So far I love it but yes it's loud in the cab . Where can I buy the rear bumper and seat covers? Thanks for the great video.
@@waydeblank2375 thank you for the feedback!
are you based in Australia? I can supply the seat covers for you, the rear bumper is a genuine cfmoto one that came with the hunt version. If you can drop me a message via our website, I can let you know pricing for the seat covers
insinct.com.au/contact-us/
@@InSinctOffroad I live in Maryland
What are the stacks in the back of the cab going over the roof?
@@paulraschke1670 they are the snorkels. One is for the air intake and one is for the CVT
I replied to your comment but don’t think UA-cam let it go in. Anyway 23 and 24 models do appear to come with panels for the storage area. Just look up the year and uforce 600 interior and you’ll get load of pictures of them. I’d ask the dealership, maybe they forgot to put them on.
I guess it depends on the market, and availability etc. In Australia they don’t, I spoke to the dealer. Not sure if you seen the ones we put together at the end of the video, they are aluminium not plastic and also come with a panel for the middle section 👌
@@InSinctOffroad nice, yeah the ones I see here in Canada and on the USA ones are plastic. I looked them up on CFMoto’s website after in the parts list for replacing, they’re over $20 per side to replace them here in Canada. I’m hoping next year to get a 600, gonna try and save up to get the full cab enclosure with wiper kit and heater 1st before looking into financing one. Quad isn’t so fun once you get into the colder seasons lol.
@@HITMAN934 I can imagine a full cabin would be very handy in those conditions! Hope to do some products for the quads as well in the future but for now will focus on the utvs
What year is your 600 ? I’m pretty sure 23 and 24’s have a plastic paneling for the storage area from pictures I’ve seen. May want to take to your dealer, who knows maybe they forgot to install them ?
Mine is a 24. I haven’t seen any that come with them before.
@@InSinctOffroadGoogle 2023 uforce 600 interior and click images. All of them new machines with tags still on show panels on the storage areas.