How to Build Ultimate 5-Inch FPV Drone with Galaxy Props GEPRC Mark5 O3 in 2024! // Beginner Guide
Вставка
- Опубліковано 29 чер 2024
- In this video, I'll walk you through the complete step-by-step build of the GEPRC Mark5 DC DJI O3 6S ELRS. From unboxing the components to assembling the frame, mounting the motors, and soldering the electronics, I've got you covered.
If you have any questions or comments, feel free to leave them below. Don't forget to like and subscribe for more FPV drone content! Enjoy the freestyle action at the end of the video!
#fpvbuild #fpvdrone #fpv #diydrone
---------------
TIMESTAMPS:
00:00 - Intro
00:13 - Parts
00:21 - T-Motor Velox V3 KV2050
00:27 - Speedby F405 V4 Flight Controller and 55A ESC
00:47 - DJI O3 Air Unit
00:57 - ND Filters
01:02 - CNHL 6S Batteries
01:13 - ExpressLRS Receiver
01:19 - Hurricane 51433 Props
01:28 - Tools Overview
01:56 - Assembling Bottom Plate and Arms
02:42 - Mounting Motors on Frame
03:15 - Soldering Capacitor to ESC
03:34 - Soldering XT60 Connector
03:48 - Soldering Motors to ESC
04:04 - Soldering Motor Connections
04:22 - Soldering Receiver
05:31 - Installing Standoffs and Camera Cage
06:05 - Mounting Flight Controller
06:19 - Mounting DJI O3 Air Unit
07:34 - Mounting DJI O3 Camera
08:22 - Mounting Top Plate
08:32 - Smoke Test
09:02 - Mounting Props
09:18 - Final Result and Freestyle action footage
---------------
---------------
Parts used:
- GEPRC Mark5 DC Pro O3
- T-Motor Velox V3 motors (2050KV)
- SpeedBee F405 V4 flight controller with 55A ESC
- DJI O3 Airunit
- CNHL 6S batteries (1100mAh)
- Hurricane 51433 Galaxy props
- GEPRC O3 Antenna mount STL: www.thingiverse.com/thing:625...
---------------
---------------
Music
Song: Venjent x Oktae - Calling For You
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/CallingForYou
Watch: AT/youtube
---------------
----
About me:
Hey, it's FPV Geek from Germany!
Building drones, capturing cinematic views, and carving up the skies with freestyle flying. Let's geek out together!
----
how to build an fpv quadcopter
how to build an fpv drone
how to build a drone
#drone #quadcopter #geprc #dji #djigoggles #djio3 #tmotorfpv #speedybee - Наука та технологія
Good job!
Thank you 🤩
i like your video, very detail! subscribed.
Thank you very much!
GREAT VIDEO MATE
Thank you ☺️
Great build!
Thank you!
Great result ....
Thank you 🤩
Bro, everything is fine, but for the soldering part, include more flux and the finish of the soldering should be round mirror finish, like you need to be able to see your face in it. cover more surface area as possible and immerse the wire conductor as much as possible into the solder.
Many thanks for your tips.
Unfortunately, my solder joints really don't look that good. But I'll try again with more flux. Do I have to desolder the areas first, or can I simply apply more flux and re-solder?
@@fpv-geek You could add flux on the existing joint, and add some more lead.
But for a clean build, remove all the solder joint and re tin then solder again with flux. Mr.steele has made a video specifically on this. it can clarify all of our doubts regarding soldering.
@@lokaero Many thanks for your tips. I will try to re-solder it
id always recognise "calling for you" by venjent, or any of his songs for that matter😂
I love that song. 🎵 🤩
great video love you sir from bangladesh.
i just want to how do i can buy a used Radiomaster boxer radio? very cheap price?
Thank you very much. You can have a look on ebay to see if there are any available.
Can you give the back side tpu design
Sure. I updated the description with a link to thingiverse ☺️
I built the same drone... But can i know about the tuning u did on this drone???
But of course. I spent many hours tuning the copter with PIDToolbox. What exactly do you want to know? Did you use the same motors and flight stack?
@@fpv-geek can i get your insta id?
Yes, you can follow my link on my channel
Why no capacitor
there is a capacitor (03:15)
galaxy props look better imo
Thank you
Can you tell me what use remote control for fly
I use the radiomaster zorro
@@fpv-geekplease tell me can i use remote jumper v2
It depends on your receiver module. which module do you use?
@@fpv-geek jumper v2 t-litle 4 in 1
And which RX module is in your copter?
Dude Flux
You mean soldering?
@@fpv-geek yes, for the solder, everything else looks great though. thanks for the video :)
Thank you!
Yes, I have already ordered flux and will re-solder it. Thanks for your tips.
$$ ?❤😊
What do you mean?
Hey man. I know there is a ton of information online on what to buy when getting into FPV. I live in Germany too. I have a budget of 1.5 - 2k. What would you recoomend me to buy (also equipment to build)?
Want to get started with a 5-inch FPV drone? There are ready-made sets to buy. You'll get there with your budget.
Otherwise, look for a Tinywhoop set. Like the Cetus X from BetaFPV. That's what I started with. I also have a crash compilation on my channel of this drone.
Such sets are available for around 300-400€. They're all good for getting started in the hobby ☺
If you have any questions, just let me know.
"ultimate freestyle build " while having a dji 03 on a deadcat frame and a variable tilt mount at the font is a crazy thing to say lmfaooo
Would you say that an X-frame makes that much difference? And what's the problem with the O3 and a variable tilt mount?