What a joy to watch the knife less gold hood wrap , I've glued snake skin plether to a hood using spary glue .But The self sticking is the way to go . Also the guy did great job
Buenas noches, una vez puesto el wrap, necesita poner una capa de vinil transparente? Un conocido lo puso y despues le aplico un brillo y se achicharro el vinil
Been watching these non stop since I decided to do my car. Cant help but notice NONE of the pros use adhesives like Rapid Tac. None of them. So why do we need to use it and why do they sell it if its unnecessary?
Im talking about the spray called Rapid Tac. They all put it on dry. I never see them spray anything. They just rely on the adhesive on the back of the vinyl. So if that's good enough then why do I need to use spray adhesive is what im asking.
Rapid Tac is designed for layering multiple layers of vinyl or for flooding premium vinyl without the conform. This vinyl has a conform ( grid pattern for air dispersal) built in....the rapid tac is basically a easy way to flood out graphics without the conform with a fast setup time....with Multiple layers of vinyl you can remove the masking layer way faster than with soap and water solution.
When you pull the backing paper off does it cause static to attract particles' which then can stick to the vinyl' which then cause very small bubbles under the film?
people, people, people,...... someone said he's going for the #2flat look for rose royce and not the #10glossy look for Lamborghinis...........just made that up........is it a flat line of colors with out the shine or did he do it right and not stretch it to get that look?
Aknife is a cutting tool, a blade, or a cutter among other things for food, a weapon. Anything that can cut...even a razor blade knife for cutting plastic, cardboard, paper. A paper cutter is a knife.
someone said you can stretch it to 10points.......he just pulled the paper off the back and laid it down on the cars' hood.......nice quick job but, if he stretch it to 4points would he get a better wax shine look for the showroom?........guess it depends on your customers taste in their rate in shine, #1flat to #10glossy............love it......
sh k 別のメーカーのカッティングシートの体験談で良ければ。 耐候3年の白の光沢のカッティングシートを使いました。 洗車機に入れた後表面に小さな線傷がたっぷり入り、わずか1年で表面の光沢が無くなるどころか塗装面が見えるくらいまで見るも無惨な劣化をしました。わずか1年で洗車機は1回、あとは手洗いです。 青空駐車とあわせたダブルパンチですね。 こちらのメーカーはどれ程耐久性が良いかは分かりませんが、洗車機は止した方が良いです。
damn why didn't i think of that when it comes putting sticky paper on some furniture cut thru the middle and work yourself out i just learned something new lol of course i would have to be careful not to cut the paper
この人多分だけど、シート屋の貼り方してるね。
エアフリーとはいえ、穴開けずにエア抜きする技術すごい。
小さい穴開けて空気抜くのが基本だと思ってたし、別に仕上がりも目立たないからよくやるけど、やらない方がいいのは間違いないからやっぱ凄い。
ご視聴ありがとうございます！！お目が高い！！
すごく綺麗
貼るよりもカットの技術がすごいわｗ
職人はなんでもかっこいい
So relaxing seeing a pro do it..
It's amazing! Good job!!!!
かっこよすぎ
スーってなっていくのがみてて気持ちいい
Muy buenos Qué grande Maestros
Yo también lo creo！
Excellent job! Congratullations!
仕事早い人っていいよね
high quality apply able wrap, skilled hand, nice method, fast, efficient, and a million views.
you have the best tutorial on the web you did fabulous and showed how to do it effortlessly with some patience and right tools, ware I can buy this at
China for cheap Wish.com
Muito bom, ficou excelente.
小さいカッターもあるよ！
ボンネットから、フロントの窓？が、切るのが、大変じゃんね‼️
職人の仕事は見てて気持ちいいな
やっぱ職人って凄いな
What a joy to watch the knife less gold hood wrap ,
I've glued snake skin plether to a hood using spary glue .But
The self sticking is the way to go . Also the guy did great job
Thank you for a very nice comment！
‼
@@PLUS74 thank you have a great day
Los felicito muy buen acabado calidad de trabajo
Buenas noches, una vez puesto el wrap, necesita poner una capa de vinil transparente? Un conocido lo puso y despues le aplico un brillo y se achicharro el vinil
Funny voice kinda like the old HB guy Bruno or when you fast forward a tape with sound.
that's right. Everyone gets the same voice
So bummed out!
I was at least 13 minutes into this video before I realized its not the
Knifeless Car Jack Tutorial that I had searched for.
😮
As you say！
O cara é muito bom
😱😱
Perfeito!
Saudações aqui do Brasil
🇧🇷🇧🇷😊👌
Would have been nice to see what the guy was doing when removing the excess vinyl, cameraman must have been asleep!!
Photographer was sleeping！！
BRAVO IMPRESSIONNANT
philippe gosselin
Salut monsieur Merci
保護フィルム貼るのうまそう
greatt!!
元ダイノック屋と内装屋だからこれ副業にしようっと
this very good
Amazing !!!👍😃
wonder how much salary he got ... awesome solo job
In the case of Japan, the salary is not added by such a work in particular
Wow vier nice I like it
looks good enough for me
thank you very much
good materials make good result...........
Been watching these non stop since I decided to do my car. Cant help but notice NONE of the pros use adhesives like Rapid Tac. None of them. So why do we need to use it and why do they sell it if its unnecessary?
Why is not it?
Im talking about the spray called Rapid Tac. They all put it on dry. I never see them spray anything. They just rely on the adhesive on the back of the vinyl. So if that's good enough then why do I need to use spray adhesive is what im asking.
Rapid Tac is designed for layering multiple layers of vinyl or for flooding premium vinyl without the conform. This vinyl has a conform ( grid pattern for air dispersal) built in....the rapid tac is basically a easy way to flood out graphics without the conform with a fast setup time....with Multiple layers of vinyl you can remove the masking layer way faster than with soap and water solution.
D
哇喔！好厲害的巧手，酷！😄
謝謝你的評論！！！
スマホのフィルム貼ってもらおうかな🧐
FROM DAMASCUS Syria 🇸🇾 nice work
Thank you for the praise！
すごー
貼る技術も凄いんだけどなんと言ってもカット技術がやばい
ご試聴ありがとうございます！
見るポイントがいいですね！！
When you pull the backing paper off does it cause static to attract particles' which then can stick to the vinyl' which then cause very small bubbles under the film?
In the street, I make dust come near by static electricity, but the air bubbles do not enter
Knife - less?, I guess I don't know what a knife is.
Is that a knife I see before me?
Can it be polished or clear coated?
What was that strange tool he used around 11.50? He used it to 'cut' the waste sheet at the front of the bonnet?
I like this hopefully is uv resistant and waterproof lol
I also love wrapping！
高級スポーツカーなどの下取り期待の高い車ならやる価値ありますね。
ご視聴ありがとうございます！確かに保護目的でもされる方はいますね!!
Very nice video...but for me knife-less means no sharp blade gets closer than 1inch to the car...
Thank you for watching.！
The knife-less was meaning "knife-lees-tape" but we have pointed out to you///(+o+)
Just to be clear! We did see a knife one minute in? 🤣😂🤣😂
Yes! saw！！
also at 8:28 in . . . .
Great concept. What is the cost of materials?
8:30 i can see a knife clearly
What a great job
Wow really nice iam allso do the wrapping in Nepal
簡単そうに見えるが素人には絶対できない奴や
向き不向きもあるんだろうけど、これだけキレイで早いのはやっぱりスゴい
ラッピングするのがラグジュアリーカーとかレーシングカーみたいな桁外れに高い車にミスなくラッピング出来るような腕前になるまで時間かかるんだろうな
people, people, people,......
someone said he's going for the #2flat look for rose royce and not the #10glossy look for Lamborghinis...........just made that up........is it a flat line of colors with out the shine or did he do it right and not stretch it to get that look?
The title states knife-less! I see what looks like a blade.
Second part, this is knife-less
-tape:)
ua-cam.com/video/_-vtZbrARl4/v-deo.html
Beautiful white car gone
What else if not a red boxcutter is he using? 9:38
But you were writing Knife-less tape1
Yeah sure.
This is definitely a knife！
なんかドライヤーかっこいい
ヒートガンでしたっけ。
Aknife is a cutting tool, a blade, or a cutter among other things for food, a weapon. Anything that can cut...even a razor blade knife for cutting plastic, cardboard, paper. A paper cutter is a knife.
Second part, this is knife-less
-tape:)
ua-cam.com/video/_-vtZbrARl4/v-deo.html
マジですげぇ
Hound 。 凄いですよね、僕なら緊張してできないです(°▽°)
Muito bom!
Espero um dia fica assim
someone said you can stretch it to 10points.......he just pulled the paper off the back and laid it down on the cars' hood.......nice quick job but, if he stretch it to 4points would he get a better wax shine look for the showroom?........guess it depends on your customers taste in their rate in shine, #1flat to #10glossy............love it......
Thank you for watching！
Although it is a difficult problem, I will refer to it！
Thank you very much for your comment.
Wow se ve tan facil de hacer,,pero en realidad es muy dificil
Sí, es muy difícil llegar al punto.
What the name of material you used bro ?
Sorry its maybe u cant understand but, what the name of the material
Like to see him try to wrap my dax cobra
You are on a cool car！！
Peter Stevenson I love Dax cobras! Please post a video showing yours - what's its history? What stories can it tell?
Onde consigo comprar este material da 3M?
3m.com
Thats the easiest Part to wrap. Try the bumper with all the air inlets and drl and other holes
We love the color beautiful. Like fingernail polish same concept change it when you want to see another color.
Quero ver ele fazer isso, com um Gold Max kkkk
Kkkkkkkkk né
qdo adesivar de um lado o outro já tá levantando td kkkk
What is the brand of the heating gun?
Es lo máximo
洗車機に入れたらどうなるかも見てみたい
sh k
別のメーカーのカッティングシートの体験談で良ければ。
耐候3年の白の光沢のカッティングシートを使いました。
洗車機に入れた後表面に小さな線傷がたっぷり入り、わずか1年で表面の光沢が無くなるどころか塗装面が見えるくらいまで見るも無惨な劣化をしました。わずか1年で洗車機は1回、あとは手洗いです。
青空駐車とあわせたダブルパンチですね。
こちらのメーカーはどれ程耐久性が良いかは分かりませんが、洗車機は止した方が良いです。
What is life / expiry of coating ??
Sou único brasileiro
Waoooo The best
thank you very much！！
すげー丁寧にドレス着せとりますわー(゜ロ゜)
うまい表現ですね〜！
さながら一流の仕立て屋
awesome
all I want to know is what he would charge me to do my truck
Mantap
What colour will it be?
Sounds like Jawas doing the commentary.
Is the car wrap viable in colder climates?
Te tardaste un madral amigo la srita China te lleva de calle.....
かっけぇー！
thanksssssss!!!
自分でやったら塗装代どころか、
車体より高くついてしまう。
それだけ失敗する自信がある！
凄い技術やわ 水槽のバックヤードに張るのにも苦労するのに(^o^)丿
Felicidades
expert
damn why didn't i think of that when it comes putting sticky paper on some furniture cut thru the middle and work yourself out i just learned something new lol of course i would have to be careful not to cut the paper
That's right！！
güzel işiniz
Onde encontro esse material
Como se chama esse material? Qual referência dele?
Isso é chamado de embalagem de carro
角引っ掛けないで貼ってるけど 剥がれてこないのかなぁ？
Super!
thank you very much‼️
左端角のテープは何だったんだろう？上からそのまま貼ってたんで、シワ取り様切り替えの切れ込みライン用でもないみたいだし 何だろう？あ！剥がす時のためのラインか？！
後編でワイヤーを使った施工をされてるので、その為の下準備じゃないですかね？
ua-cam.com/video/_-vtZbrARl4/v-deo.html
0:48「事前に貼っておいた、緑の粘着力の低いビニールテープをはがして・・・」て言ってます（＾＾）
@@rikuu132go ありがとうございます〜！貼り付けて頂いた動画で良くわかりました(・∀・)
Nice demonstration but I don't understand why.
Thanks for a good comment
go good