WOW !! Finaly i found my dream setup Case . Mirroring everything is just what i wona have for soo long !!. I´m a lefthander and i love to have everything inverted. Just for beeing a lefthander what´s how ever is till now this day an unicorn thing. Thank you for this guy´s and girl´s !! 😍🥰
Thanks. Could not figure out myself how to mount VGA holder platform. By the way it did not want to slide to the end so I needed a gentle help of a hammer to align holes for 2 screws.
2 questions: 1. Can use the vertical GPU configuration while inverting the MB? 2. can the VGA holder be mounted only in this one postion or is the top mount variable?
You can invert the motherboard and use a horizontal GPU configuration with the VGA holder. However, inverting the motherboard and using a vertical GPU configuration is not possible with our accessories.
Be quiet, I have a question regarding the CD door. It has a central locking clip and 2 side clips. It is too hard to open it. When I received the case, I could not open it at all as the central clip kept it locked until I pushed it from the inside. It seems like I need to remove one of them, i.e. leave only the central clip, or 2 side clips. They don't play well together. What is your intention here?
Hello, usually the cover of the HDD and SSD bay can be easily opened from the outside. If you have any problems with this, please contact our service department (service@bequiet.com) so that we can help you.
Moin, um es ganz kurz und knapp zu machen: vorne und unten Luft rein, hinten und oben raus. Sag gerne Bescheid, wenn wir die detaillierter weiterhelfen können/sollen :)
@@bequietofficial danke. Das würde aber bedeuten, dass die Grafikkarte gegen den Luftstrom von oben arbeitet? Im invertierten Zustand zeigen doch die Grafikkarten Lüfter nach oben. Es müsste demnach Luft von oben reingeblasen werde oder nicht? Mit entsprechender Auswirkung auf die anderen Lüfter für eine gleichmäßige Druckverteilung?
@@bequietofficial es wäre super wenn ihr auf meine frage eingeht. Warum empfiehlt ihr exhaust Lüfter oben im invertierten Zustand? Es sollte doch intake sein, damit die lüfte nicht gegen die invertierte Grafikkarte arbeiten.
inverted layout the right handed people of the world thank you. I'll buy one even if it sits in my closet until I die. I wonder if it has support for more 3.5 hdd bays.
Quick release panels are missing, but the most serious problem is that there is no provision for BTF motherboards. I'm a be quiet customer and I was waiting to buy a new case but at the moment I have to put be quiet aside, I'm very sad! P.S. Silent Base 802 is the best case on the market, purchased three years ago, I don't regret it at all!♥
Hey, thanks for your feedback. We'll let product development know about your wish. Great to read that you enjoy your Silent Base 802 so much. Thanks for being part of the be quiet! community.
I do wish the optical bay was at the top rather than the bottom, its such a tall case it makes no sense to have it on a desk IMO as it makes the QI charger too high up plus its really heavy and awkward to lift. Also screw holes for castors would be nice so you can actually have it on the floor without it being a PITA to move. Plus I find it very hard to believe user feedback wanted capacitive buttons, everyone I know hates them.
I don’t hate them, currently using this case. I hate that they’re constantly lighted, but they’re ok at least for me. Optical bay almost not used these days, so if I were you I would just be happy it’s included no matter where.
Geht es in inverted auch, die GraKa mit dem optionalen Riser-Kabel hinzustellen? Oder geht das nur im normalen Layout? Das wäre mein KO-Kriterium. Ansosnten perfektes Case!
That case is damn big, even not fit under my desk as this case is 60cm long. As for inverted option.. hm .. hot air comming to up, cold to down by physics.. cpu could be colder, but gpu hotter and more dust to gpu vents
Generally speaking: no. But as you can invert the case and exchange the side panels, you can get in touch with our service and ask for metal side panel as a spare part. www.bequiet.com/en/contact
I still feel like they could have reduced the screws even more though. My worry is less screws means if you mess up the threads at some point, its no longer secure. Also seems a bit lacking to only have a single screw holding the GPU support.
Depending on where you want to place your PC and if you still want to have the chance to see everything inside your case you may want to have it inverted.
Ich kann bei den 901 kein 420 AIO einbauen weil die Frontpanel Abdeckung nicht mehr passt wegen den 5,25 Laufwerk was soll das?! Im Handbuch steht das vorne ein 420er Radiator passt (Arctic 420 RGB)
Es geht natürlich nur eins von beidem. Wenn wein 420mm Radiator eingesetzt wird, passt kein optisches Laufwerk mehr. Eine Nutzung von beidem ist nur bis 360mm Radiatoren möglich.
Still only one USB C? Still the covers on back panel with no fan/rad mounting option? Where’s the Orange accents? Feeling disappointed was expecting bigger advances from bequiet
We need more cases with this option!
WOW !! Finaly i found my dream setup Case . Mirroring everything is just what i wona have for soo long !!. I´m a lefthander and i love to have everything inverted. Just for beeing a lefthander what´s how ever is till now this day an unicorn thing. Thank you for this guy´s and girl´s !! 😍🥰
Thanks for this great Tutorial. I like my inverted Case. It is so beautiful. Happy Greez from Germany
That's great! Happy greetings back :)
Thanks. Could not figure out myself how to mount VGA holder platform.
By the way it did not want to slide to the end so I needed a gentle help of a hammer to align holes for 2 screws.
yup should have gotten this over my North XL tbh
This maybe what Iam looking for, been meaning to update my son's PC case.
I have a beQuiet 900 rev2 that I love! It is my ideal case!
🧡
@@bequietofficial mine is orange too 🤗🧡
2 questions:
1. Can use the vertical GPU configuration while inverting the MB?
2. can the VGA holder be mounted only in this one postion or is the top mount variable?
You can invert the motherboard and use a horizontal GPU configuration with the VGA holder. However, inverting the motherboard and using a vertical GPU configuration is not possible with our accessories.
Done. This is my next case
Will let you know how I get on Inverting it
We are looking forward to it!
❤ Ahhhh ❤ Water custom loop in this case ahhhh ❤
This system is ideal for those who are afraid of water cooling system leaks. Graphics card will not drown.
Be quiet, I have a question regarding the CD door. It has a central locking clip and 2 side clips. It is too hard to open it. When I received the case, I could not open it at all as the central clip kept it locked until I pushed it from the inside.
It seems like I need to remove one of them, i.e. leave only the central clip, or 2 side clips. They don't play well together.
What is your intention here?
Hello, usually the cover of the HDD and SSD bay can be easily opened from the outside. If you have any problems with this, please contact our service department (service@bequiet.com) so that we can help you.
Danke für das Video. Was ist das empfohlene Lüfter Setup im invertierten Zustand (Top exhaust, front intake, rear exhaust?)
Moin, um es ganz kurz und knapp zu machen: vorne und unten Luft rein, hinten und oben raus. Sag gerne Bescheid, wenn wir die detaillierter weiterhelfen können/sollen :)
@@bequietofficial danke. Das würde aber bedeuten, dass die Grafikkarte gegen den Luftstrom von oben arbeitet? Im invertierten Zustand zeigen doch die Grafikkarten Lüfter nach oben. Es müsste demnach Luft von oben reingeblasen werde oder nicht? Mit entsprechender Auswirkung auf die anderen Lüfter für eine gleichmäßige Druckverteilung?
Bei einem invertierten Setup müssen leider immer Abstriche beim Airflow gemacht werden.
@@bequietofficial es wäre super wenn ihr auf meine frage eingeht. Warum empfiehlt ihr exhaust Lüfter oben im invertierten Zustand? Es sollte doch intake sein, damit die lüfte nicht gegen die invertierte Grafikkarte arbeiten.
Can you still install a GPU vertically if you have converted the case
Is it possible to deactivate light on the sensor buttons for RGB and FAN?
No, unfortunately not.
Is it compatible with EEB form factor 30.5x33 cm motherboards? For example the Asus Pro WS W790E-SAGE SE would fit?
I believe the largest board it will take is E-ATX...30.5 x 27.5 according the manual.
inverted layout the right handed people of the world thank you. I'll buy one even if it sits in my closet until I die. I wonder if it has support for more 3.5 hdd bays.
please don´t use 3,5 HDD´s ! Do it the right way and use some 2,5 SSD´s. They are faster, and have a very long lifetime without mechanical issus. 😉
@@stefanmcareavey368 SSD storage both price and density are no match for what I do.
@@AbsenceOfLogic thank you father
@@stefanmcareavey368who is using 2.5" nowadays when we have M2 sticks?
Quick release panels are missing, but the most serious problem is that there is no provision for BTF motherboards. I'm a be quiet customer and I was waiting to buy a new case but at the moment I have to put be quiet aside, I'm very sad! P.S. Silent Base 802 is the best case on the market, purchased three years ago, I don't regret it at all!♥
Hey, thanks for your feedback. We'll let product development know about your wish. Great to read that you enjoy your Silent Base 802 so much. Thanks for being part of the be quiet! community.
I do wish the optical bay was at the top rather than the bottom, its such a tall case it makes no sense to have it on a desk IMO as it makes the QI charger too high up plus its really heavy and awkward to lift. Also screw holes for castors would be nice so you can actually have it on the floor without it being a PITA to move. Plus I find it very hard to believe user feedback wanted capacitive buttons, everyone I know hates them.
You don't know me, but I hate them too.
I don’t hate them, currently using this case. I hate that they’re constantly lighted, but they’re ok at least for me.
Optical bay almost not used these days, so if I were you I would just be happy it’s included no matter where.
Later schaut das geil aus, muss haben!
Hey be quiet, I’ve inverted this case and when inserted the dark rock 4 your Brenda name on it is shown upside down..))
haha, yes that is possible in the inverted layout
will the inverted option be available for sale too? I don't want to go through all that to invert the case.
Unfortunately, it only comes with the default setup, but the whole process isn't too difficult.
Then don’t go through it and ask someone else to invert it for you like I did,
Geht es in inverted auch, die GraKa mit dem optionalen Riser-Kabel hinzustellen? Oder geht das nur im normalen Layout? Das wäre mein KO-Kriterium. Ansosnten perfektes Case!
That case is damn big, even not fit under my desk as this case is 60cm long. As for inverted option.. hm .. hot air comming to up, cold to down by physics.. cpu could be colder, but gpu hotter and more dust to gpu vents
Is there a way to get a second metal side-panel instead of tempered glass?
Generally speaking: no. But as you can invert the case and exchange the side panels, you can get in touch with our service and ask for metal side panel as a spare part. www.bequiet.com/en/contact
Well thought out - nothing PITA, just not that many screws :]
I still feel like they could have reduced the screws even more though. My worry is less screws means if you mess up the threads at some point, its no longer secure. Also seems a bit lacking to only have a single screw holding the GPU support.
@@alexatkin GPU does not require too much force to support, but I agree, I would prefer to have 2 screws there
Can I somehow deactivate the qi charger?
Only if you disconnect the SATA cable
White version? By any chance.
Not planed yet
Only black?
white colour??
Yes, this is only available in black
Believe me you will not want it in white. I initially planned to buy white 802 until i saw that white color is different across different parts.
Like & Thanks =)
What was the point of flipping the sides?
Depending on where you want to place your PC and if you still want to have the chance to see everything inside your case you may want to have it inverted.
이쁘다
Ich kann bei den 901 kein 420 AIO einbauen weil die Frontpanel Abdeckung nicht mehr passt wegen den 5,25 Laufwerk was soll das?! Im Handbuch steht das vorne ein 420er Radiator passt (Arctic 420 RGB)
Es geht natürlich nur eins von beidem. Wenn wein 420mm Radiator eingesetzt wird, passt kein optisches Laufwerk mehr.
Eine Nutzung von beidem ist nur bis 360mm Radiatoren möglich.
Still only one USB C? Still the covers on back panel with no fan/rad mounting option? Where’s the Orange accents? Feeling disappointed was expecting bigger advances from bequiet
Orange accents are on LED at the front and under the glass. Don’t know why orange? I’ve set it to purple, looks nice.
Just curious why would you need more than 1 usb c?
@@vqa33 Don't know why purple? I've set it to green, looks nice. *Color is a matter of TASTE.
LOL only Dutch people like orange