In this video I do a restoration of a rusted and stuck vise that I got for free. - Please let me know what you think! 😁 Also, don’t forget to check out this old vintage pipe vise I restored! ⭐️ ua-cam.com/video/P1WmOUrOGIk/v-deo.html Have an awesome day! R&R
Ok so two things. First I give mad props to anyone that hand sands for hours. You’re a better man than I am. Second the “fancy lathe work” was pure genius. I would have never thought of that.
Great job! I liked all you did. I noticed at the end you had John 3:16 on the blue tape. Coincidence, whenever I refurbish a vise I write my initials, the date, and John 3:16 on the base. I gift them to family and friends. Thank you. Carl
If I may, when you're using heat on stubborn fasteners, try to apply the heat to the surrounding material (vise jaws in this application) so the material surrounding the threads expands, not so much the actual bolt. Over time, either works because expansion breaks bonds but I've found its often a bit faster heating the material around the fastener instead of the fastener
Nicely done…new subscriber here! appreciate your attention to detail…and your reference to John 3:16. Keep up the good work…and I like the safety addition….always work safe, glasses gloves etc…
Реально хороший восстановительный ремонт. От ржавчины очищено и окрашено, рабочие поверхности восстановлены, на некоторые наведения дома. Хорошая работа.
Just came across your channel, as I watch other like channels. I appreciate your attention to detail and extra effort you put into the work. I don't see the usefulness of the anvil areas in the rough cast form before you started, or the pipe fitting jaws for that matter. Good call on finishing them out! I subscribed and will watch more of your work.
My old vice had threaded balls on each end of the 5/8 handle, a first for me, threaded then rounded off I reckon. The best part of your build & restoration ? “Made in USA” 🙂
I see lots of channels doing the painting of the lettering on these kind of cast iron tools, I think it would look cool to instead use black to have a kind of shadow, like if you paint the entirety of the letter with black, then the very front part(which is the part you painted black in this one) with white, so it's like a shadow with white lettering on the front, it won't look original obviously but cool looking in my minds eye
I subscribed, just for John 3:16. For it as well. "Mert úgy szerette Isten a világot, hogy egyszülött Fiát adta oda, hogy aki hisz benne, az el ne vesszen, hanem örökké éljen." (Jn 3,16)
Yes. "Porque de tal manera amó Dios al mundo, que ha dado a su Hijo unigénito, para que todo aquel que en él cree, no se pierda, mas tenga vida eterna". (Jn. 3, 16) ¡Happy Easter!
In this video I do a restoration of a rusted and stuck vise that I got for free.
- Please let me know what you think! 😁 Also, don’t forget to check out this old vintage pipe vise I restored! ⭐️ ua-cam.com/video/P1WmOUrOGIk/v-deo.html
Have an awesome day! R&R
Get you a can of PB blaster. You won't regret it.
Thanks for the tip! 👍
Excellent
Ok so two things. First I give mad props to anyone that hand sands for hours. You’re a better man than I am. Second the “fancy lathe work” was pure genius. I would have never thought of that.
Thank you! I appreciate it! 👍👍
Why announce the fact that you are saying two things? Just say them
@@smashyrashy Does it bother you that much? LMFAO GTFOH
@@smashyrashy
to irritate you mostly 🙄
GREAT Restoration friend, have a nice day & Christmas. Brian UK !!!.
Thank you Brian! Have a great day and a very Merry Christmas as well! Blessings!
I like it without extra color 👍👍
Carsten
Sweden
Thanks Carsten! Greeting!
Sweet! Love the B&A split screen.
This guy has the patience of Job, all that hand sanding 😫. Also, that shop floor so clean!
😁Thanks for watching! 👍👍
Καλημέρα και καλή Ανάσταση από την όμορφη Ελλάδα
Greetings! Thanks for the comment! Stay well.
good job!
Thanks for watching!
Very nice. Fantastic.
Appreciate it! 👍👍
Nice job!!!!
Thanks much!
Why do i find these videos oddly fascinating
Wow, that hammerite really brought out the texture of the roughest casting I've even seen on the face of the earth!
Lol it was pretty rough!
superbe travail, bravo
Thank you! I appreciate it!
Sweet 👍🏼👍🏼
Nice job
I had to subscribe after a couple of videos. Great work you are doing there.
Thanks very much! I appreciate it!
@@RebuiltRestored You are very welcome.
Well done! 😃👌🏼
As always, better than new!
Thanks Gary!
Beau travail !
I LOVE your fancy lathe work!
😊 thanks! Thanks for the view! 👍
Great restoration!
Автор молодец,отличная реставрация
Однозначноя подписка👍👍👍
Amazing
Thanks very much!
Art is another man’s work
Thanks for watching! 👍
Another awesome restoration!
Thanks for watching!
"fancy lathe work"... LOL love your sense of humour
I love that scripture you put towards the end there. Excellent job, God bless brother… Looking forward to more content from you
Thanks very much!
Прекрасная работа, 👍🏻.
Однозначно, лайк подписка, колокольчик.
Thanks!
PERFECT WORK
Thanks!
That's the only silver paint used on cast metal, in a restoration, that I have ever seen that I actually like! 🧡
Thanks for the feedback and for the nice comment. Have a great day!
Nice restoration
Very good
Thank you
Great job
Thanks for watching! :)
Powerkraft - Montgomery Wards. Great restoration!
Yes that is it. Thanks for watching!
nice work on that vise.
Thanks 😊
Stunning restoration beautiful restored your very talented
Thanks! Glad you enjoyed it!
Excepcional Tiro o meu chapéu pra você guerreiro!! 🤔😃😃👏👏
Thanks!
Great job! I liked all you did. I noticed at the end you had John 3:16 on the blue tape. Coincidence, whenever I refurbish a vise I write my initials, the date, and John 3:16 on the base. I gift them to family and friends. Thank you.
Carl
That is a great idea! Thanks for the nice comment! Have a great day and God bless!
New sub, great job bringing it back to life. 😃 😊
That's a great restoration , nice prize at the end of your bench.
Thanks 😎
Amazing job and video the colour looks great thanks for sharing and remember stay safe and make more great videos 🍺🍺👍👍😷🇬🇧
Thanks much! Stay safe also! 👍
Keep them restored vises coming on videos very relaxing! Looking for mini vise to restore! Bye bye shipmate!!! Brilliant!!!
Thanks! More vids coming! 🙂
The swivel clamp work is masterful.
Thanks much!
Nicely done
Thank you!
bravo beau travail soigné !
Thank you!
Witam. Prawdziwe czary. Ze złomu do dalszego życia. :) Wspaniała robota.
Thank you much!
If I may, when you're using heat on stubborn fasteners, try to apply the heat to the surrounding material (vise jaws in this application) so the material surrounding the threads expands, not so much the actual bolt. Over time, either works because expansion breaks bonds but I've found its often a bit faster heating the material around the fastener instead of the fastener
Thanks for the advice and thanks for watching! 👍👍
Looks like he got it.
Fantastic 👏great job 👍
Thanks!
Nice. I like that you didn't use a lathe or other tools that are out of reach for most people, looking forward to more videos. Subscribed.
Thanks for the feed back. A lathe would be fun but yes they are out of reach! $. :)
Nicely done…new subscriber here!
appreciate your attention to detail…and your reference to John 3:16. Keep up the good work…and I like the safety addition….always work safe, glasses gloves etc…
Thank you very very much! Thanks for the comments. I appreciate it! Have a great day!
Very nice work bro.. John 3:16...
Thanks much! 👍
Wow so 👍
Superb, Stay Safe !!!.
Thanks! Same to you!
Hey once again... great job! Loved the clarity in the welding!
Glad you enjoyed it!
Parabéns, muito bom o trabalho executado, sómente um bom profissional para fazê-lo 👏👏👏👏👏👏👏👏👏👏👏👏👏👏🇧🇷
Thanks for the comment! Thanks for watching! Have a great day!
@@RebuiltRestored Boa Noite ! Obrigado por responder meu comentário
Nice job!
Thank you .
I always love the aspect of using a vise to restore a vise
Thankfully I had an extra one to get the job done! 😂
Parabens pelo seu trabalho. Muito capricho!! Abraço do Brasil.
Excellent restoration well done.
Thanks for watching!
Fantastic job . Great restore, great video, and great audio; The Trifecta! John 3:16 👍👍
Thanks so much! 👍👍
Реально хороший восстановительный ремонт. От ржавчины очищено и окрашено, рабочие поверхности восстановлены, на некоторые наведения дома. Хорошая работа.
👍👍👍
Very nice restoration of a handy little vise. I don't usually use the slide of a vise as an anvil. Otherwise nice job.
Thanks for the comment! I understand. I would like to some day get an anvil but right now I’m just limited.
@@RebuiltRestored I understand and I really like the job you did on that vise.
You did a bang up job on this vice, do you have other tools you have restoration on.
Thanks! Yes. Have you seen the pipe vise restoration or the Barlow pocket knife restore?
Felicitaciones!!! La prensa de banco quedó muy bien restaurada 🇵🇪
Amazing restoration, congratulations!
Thank you Ed Ka! Appreciate it!
So cool 👏
Thanks for the view!
What a great job, congrats!!!!
Thank you very much!
Very nice job mate,well done !
Thanks!
Подписка на канал! Замечательная работа!
this is awesome , also prefect montage
Thanks Random Restoration!
I like the way you improve is useful to all😊
Thanks for the nice comment!
Just came across your channel, as I watch other like channels. I appreciate your attention to detail and extra effort you put into the work. I don't see the usefulness of the anvil areas in the rough cast form before you started, or the pipe fitting jaws for that matter. Good call on finishing them out! I subscribed and will watch more of your work.
Thanks! Glad you enjoyed it.
Good job
Thanks! And thanks for watching!
I found your video very interestig as well as the John 3 :16 on the wall poster. The whole of mankind needs to be restored.
True that. Thanks for the comment!
Time to Prime
What a rime 😂
Wonderful Job!!! God bless you!!!
Thank you! You too!
Fantastic Job! Nice Video! Have a gooden - Vic
Thanks Vic! Have a great day
Hey 5:58 there was 3 hands there.
👀
Camera man?
Like.
Awesome restoration vise 👍👍👍💣💥✌🏻🇷🇺
Thanks much!
cool job👍
Thanks for watching!
nice job. careful about clamping a vice in a vice tho, you could create a time inversion, lol
Lol Thanks! :)
Great job! Glad you’re a believer as well 🥰
Thank you very much!
My old vice had threaded balls on each end of the 5/8 handle, a first for me, threaded then rounded off I reckon. The best part of your build & restoration ? “Made in USA” 🙂
Thanks much! 😁
У меня такие же тисы, тоже восстанавливал, только они Советские)
Awesome! Thank you!
Very good. But the vise jaws had to be replaced ...or restored too.
Thank you. I sandblasted and blued the jaws.
It's relaxing tanx
Thanks! Glad you enjoyed it
I freakin love peach tea.
о у меня очень похожие такие только называются ленинград)))
Awesome! Thanks for the view and comment! 👍 have a blessed day!
So simple as bench vise restoration?
Simple is nice sometimes!
Это всё хорошо конечно, но почему-то у этих рестораторов свой инструмент всегда ржавый))
Bir hastayı iyileştirdin
Thanks!
Gorgeous bit o' Work!
Thanks!
Especially for 'the bluing' technique.
Your news' 'scriber,
Rick Bonner Pennsyltucky
Thanks for subscribing! Appreciate the view and comment. 👍
Bravo
Thanks for watching!
I see lots of channels doing the painting of the lettering on these kind of cast iron tools, I think it would look cool to instead use black to have a kind of shadow, like if you paint the entirety of the letter with black, then the very front part(which is the part you painted black in this one) with white, so it's like a shadow with white lettering on the front, it won't look original obviously but cool looking in my minds eye
That is a cool idea! I see what you are saying
I subscribed, just for John 3:16.
For it as well.
"Mert úgy szerette Isten a világot, hogy egyszülött Fiát adta oda, hogy aki hisz benne, az el ne vesszen, hanem örökké éljen." (Jn 3,16)
Awesome! Thanks for the sub!
God Bless You....Awesome job!
fico lindo
🤍
Viseception!
Yes. "Porque de tal manera amó Dios al mundo, que ha dado a su Hijo unigénito, para que todo aquel que en él cree, no se pierda, mas tenga vida eterna". (Jn. 3, 16)
¡Happy Easter!
Thanks! Happy Easter as well!
👏👏👏👏👏👏👏