How to replace a flash tube on Godox tt685

Subscribe to our channel for more videos like this,
The best solution for the replacement of the flash tube is to be done by professionals in authorized service for foto equipment.
This video shows how to replace the Flash tube on Godox tt685 which needs to be removed with a soldering iron.
This video is rated 5/5 stars for difficulty because it requires close attention to the details and a flash unit has electronic circuitry to charge a high-capacitance capacitor to several hundred volts,
Caution:
* You MUST take the time to discharge the Capacitor, It is very powerful and can hurt you, and will also damage the circuits if you try to remove the bulb without discharging first. The video shows how to discharge with making Your custom tool, but generally discharging takes more than a few minutes depending on how long ago you energized it.
*DO NOT touch the resistor you use to discharge the capacitor if it's not rated high enough it will burst but either way it will get VERY HOT. Use the plastic tube.
*Do not touch the bulb with your fingers. Like any high powered bulb, oils from your skin can cause the bulb to shatter during use.
* Anything you do you doing on your own risk, you are responsible for any harm or damage that you suffer as a result. You can do it, but it’s at your own risk.
Tools required are a small Phillips head screwdriver (size 0 or 00), small Flathead screwdriver, a soldering iron, and a resistor tool for discharge.
Best regards
Pop Photo MK