I couldn't comment on part 1 so I'll do it here. Thank you very very mucb for that video! Every single video or web page I found only showed how to remove screens that either had the pull pins or the ones with the slide locks. I've been going crazy trying to figure out how to remove our screens without damaging the frame of the screen. Much appreciated Dean!
To install this style of screen I typically put the top inside corner into the groove first and then the bottom inside corner next. Inside corner meaning the side that is directed towards the middle of the window and not the outside edge. Then I put in the outside top corner finishing with the bottom outside corner. Having a thin putty knife will make this easier. If you find your screen is built a little bit large and makes it difficult to put back in, put your putty knife between window frame and the screen frame allowing the screen to slide down the putty knife and drop into the channel. Sometimes if the screen seems too tall but the width is not that’s tight I will put in the top inside edge and then the top outside edge first. When I do this I have the screen down maybe 4 inches and then after I get the two top corners and I slide the screen up into the top groove. Then I put in the bottom inside corner finishing with the bottom outside corner using my putty knife to slide it into that channel.
This was helpful I was doing screen replacing but now I can't get them back into place.
Eyes are the windows to the soul. Dean's window cleaning has changed my life
I couldn't comment on part 1 so I'll do it here. Thank you very very mucb for that video! Every single video or web page I found only showed how to remove screens that either had the pull pins or the ones with the slide locks. I've been going crazy trying to figure out how to remove our screens without damaging the frame of the screen. Much appreciated Dean!
I appreciate you so much. You have such a nice voice too. Thank you!!
This is so true Dean very insightful discussion
How do you get the screen back in is what I want to know? The screens were already out when I had them redone and now I can't get them back in.
OK but how do I get it back in place
Hey Dean great video! What do you do when the corners seem to be “glued” in?
Great video thanks
Thank you!
My screen uses latches instead of slings to hold the screen together tho
How do we get them back in?
To install this style of screen I typically put the top inside corner into the groove first and then the bottom inside corner next. Inside corner meaning the side that is directed towards the middle of the window and not the outside edge. Then I put in the outside top corner finishing with the bottom outside corner. Having a thin putty knife will make this easier. If you find your screen is built a little bit large and makes it difficult to put back in, put your putty knife between window frame and the screen frame allowing the screen to slide down the putty knife and drop into the channel. Sometimes if the screen seems too tall but the width is not that’s tight I will put in the top inside edge and then the top outside edge first. When I do this I have the screen down maybe 4 inches and then after I get the two top corners and I slide the screen up into the top groove. Then I put in the bottom inside corner finishing with the bottom outside corner using my putty knife to slide it into that channel.
Get to it!!
Thank you so much
Excellent!!
My biggest problem as a window cleaner - damn screens
Dean is pretty good looking, to be honest. 😄
I can't hear this! It's incredibly soft & mumbled, even with my volume at max 😕
Anderson,has the worst design for screens. I definitely won't be buying them. How pathetic to take screens out!