My car has a separate low and high beam bulb, i want to replace my stock low beam to novsight led auto headlamp, my question is if i turn the high beam setting in my car would the novsight also turn high beam?
Thank you for your inquiry. To remove the H11 bulb, please follow these steps: 1.Ensure the vehicle is turned off and the lights are cool. 2.Disconnect the bulb's electrical connector. 3.Rotate the bulb counterclockwise until it loosens. 4.Carefully remove the bulb. We hope this helps! If you still have questions, please visit our Novsight website for assistance from our online customer support.
Thank you for your question, there is a big difference between 881 and H11. The 881 is mainly used as a fog lamp. The installation method is similar, but we will make a separate installation video of the 881 later.
Hi! Sorry for the late reply. We do sell the N39 series, but only on certain web stores. Please let me know which type of LED light you are looking for, so I can give you the best reference.
This is not that easy on my 2011 Kia optima. Your ad on Amazon says they fit both the low beam and fog light. However, on your website it says low beam only. When I tried to put then into my low beam they would not fit. The connector in the car is attached to the headlight assembly. Even if it wasn't it is square and the female plug on your led headlight is rounded. Also, the connector is not accessible from the outside of the lamp.
Hi, paumanhin, wala kaming masyadong impormasyon sa bagong modelong ito. Upang maiwasan ang maling impormasyon, maari po bang makipag-ugnayan sa dealer o tingnan ang user manual.
Hello, sorry to heard that. Can you please send us the details about your problem to: "service@novsights.com". Our technician will help you to solve this problem.
Hello, this is how you align your headlight 1. Park your vehicle on a flat surface facing a wall or garage door. 2.Open the hood and locate the headlight adjustment screws (usually on the housing, some of them might have a guiding tube on top of the screw). 3 .Mark the initial beam position on the wall. 4 .Use a screwdriver or wrench to lower the headlights by turning the adjustment screws. 5. Step back and check the new beam position. 6 .Repeat the process for the other headlight. 7. Take a test drive at night to ensure proper alignment. Remember to consult your vehicle's owner's manual for specific instructions tailored to your vehicle.
Hello! That sounds like a positioning problem. Please check on the LED bulb. The light plates should be facing 3&9 O'clock to get the best light shape. If that didn't work, please mail us a picture of the shadow and send us at service@novsights.com
Hi ijust bought N55 H11 but my original socket has one lock and your N55 has 4 which should i will cut
I'm after some h11 led for the high beam on my civic fn2 type r 2008. Will these fit behind the cover correctly ?
My car has a separate low and high beam bulb, i want to replace my stock low beam to novsight led auto headlamp, my question is if i turn the high beam setting in my car would the novsight also turn high beam?
No
Will the N60 Ultra double as a DRL on low beams without e relay?
Can anyone tell me how to unlcip the h11 from it’s socket it seems impossible to unclip it
Thank you for your inquiry. To remove the H11 bulb, please follow these steps:
1.Ensure the vehicle is turned off and the lights are cool.
2.Disconnect the bulb's electrical connector.
3.Rotate the bulb counterclockwise until it loosens.
4.Carefully remove the bulb.
We hope this helps! If you still have questions, please visit our Novsight website for assistance from our online customer support.
Can you make a video “ What is the difference between 881 and h11" please
Thank you for your question, there is a big difference between 881 and H11. The 881 is mainly used as a fog lamp. The installation method is similar, but we will make a separate installation video of the 881 later.
I have a novsight foglight h11 but my stock halogen is h8.. is this ok
Just wanted to ask do you also provide the Novsight N39 or is it fake?,if you do is it comparable to the ones that were in the video?
Hi! Sorry for the late reply.
We do sell the N39 series, but only on certain web stores.
Please let me know which type of LED light you are looking for, so I can give you the best reference.
Hey, i want to ask something 😉 n52 its good for classic reflector WITHOUT projector Lens?
Hi, friend, what model is your reflector?
@@NovsightAutoLighting for Fog light H8 audi a4 b8.5 witch one is the best of best? Waiting your answer so I can order. Thank you
This is not that easy on my 2011 Kia optima. Your ad on Amazon says they fit both the low beam and fog light. However, on your website it says low beam only. When I tried to put then into my low beam they would not fit. The connector in the car is attached to the headlight assembly. Even if it wasn't it is square and the female plug on your led headlight is rounded. Also, the connector is not accessible from the outside of the lamp.
My stock is 55w h11
Is 55w written for each bulb?
Hi, did you mean that you would like to know if every H11 bulb is 55 watts?
I have a question, my foglights are rated for 19 Watts (H16:19 Watts), but most Novsight Bulbs, minimum is 36 Watts. Will it affect performance?
Thank you for your question! It will not affect performance, pls don't worry
@@NovsightAutoLighting it will not damage my wires?
@@Drone_SOX Your fog lamp wire can withstand 36 watts of current
Gusto ko sana palitan ung stock high beam low beam and fog light ng GLX montero ko mdl '22 hndi ko lng alam anu sizes ng led sir .
Hi, paumanhin, wala kaming masyadong impormasyon sa bagong modelong ito. Upang maiwasan ang maling impormasyon, maari po bang makipag-ugnayan sa dealer o tingnan ang user manual.
Good day, I bought an H11 for my car, I followed all the instructions but mine is not working.
Hello, sorry to heard that. Can you please send us the details about your problem to: "service@novsights.com". Our technician will help you to solve this problem.
Hi. Do i need to change the headlight relays if i will install h11 led lights?
Hello! No, you don't need to change the headlight relay after replacement.
I want 3000k H11 led
Novsight n19 or n12y
The bulb will start to strobe on its low beam setting but the high beam remain steady when it's high. How do I stop the strobing?
Thank you for your question, it may need to install a decoder.
@@NovsightAutoLighting a decoder? What is that?
How to allign H11 to make the light aim lower
Hello, this is how you align your headlight
1. Park your vehicle on a flat surface facing a wall or garage door.
2.Open the hood and locate the headlight adjustment screws (usually on the housing, some of them might have a guiding tube on top of the screw).
3 .Mark the initial beam position on the wall.
4 .Use a screwdriver or wrench to lower the headlights by turning the adjustment screws.
5. Step back and check the new beam position.
6 .Repeat the process for the other headlight.
7. Take a test drive at night to ensure proper alignment.
Remember to consult your vehicle's owner's manual for specific instructions tailored to your vehicle.
I have black shadow in the middle when i switch on. Why is that?
Hello! That sounds like a positioning problem. Please check on the LED bulb. The light plates should be facing 3&9 O'clock to get the best light shape.
If that didn't work, please mail us a picture of the shadow and send us at service@novsights.com
I have 9005 and 9006, they are no where near this bright!