k tuned oval 3 inch cat back exhaust *CIVIC EP3 TYPE R*

Поділитися
Вставка
  • Опубліковано 1 жов 2024
  • Hi everyone hope you keeping well.
    Here we have a video I made on installing my k tuned 3 inch cat back exhaust. If you didn't watch my last video ( • Installing new exhaust... ) go and check that out as I installed the japspeed 421 ready for this exhaust.
    Not only does it sound great but it looks the part too.
    Enjoy the video
    ✘ Music:
    ( / chukimusic​ )
    Instrumental produced by Chuki Beats (REIGN)
    www.youtube.co....

КОМЕНТАРІ • 39

  • @Mk4heavenHD
    @Mk4heavenHD  3 роки тому +4

    Just want to say thanks Team ONAMISSION
    for sourcing and supplying this exhaust. m.facebook.com/onamissionglos/

  • @onamissionltd
    @onamissionltd 3 роки тому +4

    bwwwwwwaaAAAHHHHHHHHHH! lol your neighbours are getting the pitchforks out. and we found the funny bone very funny.

    • @Mk4heavenHD
      @Mk4heavenHD  3 роки тому +1

      ha ha ha, you not even joking they not pleased! If you look at 10:36 you can see the damage on my funny bone🤭🤣🤣

  • @Sebastian_1984
    @Sebastian_1984 3 роки тому +2

    👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

  • @UrHomieLvrz
    @UrHomieLvrz 2 роки тому +1

    Mk4-HEAVEN , I was wondering if your header and exhaust set up would fit on the ep3 si trim as well? Or is there any fitment differences between the si and type r?

    • @Mk4heavenHD
      @Mk4heavenHD  2 роки тому +1

      Im not really sure mate on that one.

  • @AH-nw8qg
    @AH-nw8qg 3 роки тому +1

    Hi, nice look and exhaust sound 😍. That pain in the elbow will keep the jealous eyes away. But I can imagine how painful it is 🥴

    • @Mk4heavenHD
      @Mk4heavenHD  3 роки тому

      Hi mate, sounds brilliant for sure. Ha ha that elbow is still recovering from the knock lol.

  • @skonkmadness5716
    @skonkmadness5716 2 роки тому +1

    🤣🤣🤣🤣🤣🤣yasis u wacked it lekka that elbow

    • @Mk4heavenHD
      @Mk4heavenHD  2 роки тому

      ehhhhh Bro that was a madness lol

  • @Synept
    @Synept 3 роки тому +1

    Don't you have launch control mapped in?

    • @Mk4heavenHD
      @Mk4heavenHD  3 роки тому

      Yes it does have it mapped in, if you watch the spoon sports exhaust video you can see it properly launch.

  • @unamaxpeedingrods4436
    @unamaxpeedingrods4436 3 роки тому +1

    cool. can we send some parts to fit your civic?

    • @Mk4heavenHD
      @Mk4heavenHD  3 роки тому

      Hi im already in touch with one of your colleagues. Thanks

  • @davidkane8660
    @davidkane8660 3 роки тому +2

    Lol the way you rolled around in pain....... Comical 😁

    • @Mk4heavenHD
      @Mk4heavenHD  3 роки тому +1

      🤣 Mate that was very painful!! I had to add that into the video.

    • @davidkane8660
      @davidkane8660 3 роки тому

      @@Mk4heavenHD I bet dude. Any new bits for the golf recently also? Or just the civic? Years ago my mate swapped his stage 2 golf for a type r he loved it then got another mk4 again too lol

    • @Mk4heavenHD
      @Mk4heavenHD  3 роки тому +1

      @@davidkane8660 Yes mate a few little bits that I need to do on the golf in the next month or so.
      I’m nearly done with the civic for now and will be back to business as usual with the golf, just need to get the civic mapped. To be honest the golfs are a better daily but the civics have that feel that no other car can replicate.

    • @davidkane8660
      @davidkane8660 3 роки тому +1

      @@Mk4heavenHD yeah I hear you there the raw n/a all motor essence. Tbh the channel is all great content bro I'm liking it all. 👍

    • @Mk4heavenHD
      @Mk4heavenHD  3 роки тому

      @@davidkane8660 thanks bro, appreciate the feedback.

  • @Fs7ven9
    @Fs7ven9 2 роки тому +1

    you from Zambia? Same system i got, if you go turbo get the 2.5 part of the system cut and made 3" broski

    • @Mk4heavenHD
      @Mk4heavenHD  2 роки тому +1

      From Zim mate. Great system for sure, I’ve sold the civic ep3 and now have a 500bhp civic EK mate as I was thinking of boosting the ep3 but the cost was crazy. It was cheaper to just buy a fully built and turboed ek.

    • @Fs7ven9
      @Fs7ven9 2 роки тому

      @@Mk4heavenHD I hear you my bro! Yeah I like the ek! What block is in it?

    • @Mk4heavenHD
      @Mk4heavenHD  2 роки тому +1

      @@Fs7ven9 It’s running B18c4 bottom end fully forged and css with b16a head. Very fun and scary car lol

    • @Fs7ven9
      @Fs7ven9 2 роки тому +1

      @@Mk4heavenHD niceeee! Wouldn’t it have been cheaper to just turbo the ep3?

    • @Mk4heavenHD
      @Mk4heavenHD  2 роки тому

      @@Fs7ven9 Not really mate I sold the ep3 and topped up for the ek which still worked out cheaper plus I have the peace of mind knowing the motor is built to take up to 650 bhp.. To be honest mate the main thing I loved about the ek was it still having the b series rawness as most ek civic's are getting k swapped. B series cars sound nicer I think, the vtec also is more apparent on the crossover.

  • @maxthecaddy8451
    @maxthecaddy8451 3 роки тому +1

    now that sounds mint👍

  • @woodmediaffc
    @woodmediaffc 3 роки тому +1

    Have you got insta mate?

    • @Mk4heavenHD
      @Mk4heavenHD  3 роки тому +1

      Hi mate not yet.

    • @woodmediaffc
      @woodmediaffc 3 роки тому

      @@Mk4heavenHD I have an Instagram and TikTok which are doing well (mainly TikTok) I live in Stockport too if you ever wanted to do a video! I know my UA-cam isn’t big but had a TikTok vid that hit 160k view and couple 100k view ones

    • @Mk4heavenHD
      @Mk4heavenHD  3 роки тому +1

      @@woodmediaffc - I need to get one sorted really, hopefully soon. Ah nice to know you live in the area mate, you never know we may cross paths one day. Will follow your channel mate and maybe make a plan to link up at some point.

    • @woodmediaffc
      @woodmediaffc 3 роки тому +1

      @@Mk4heavenHD aiii that sounds great to me thank you! Let me know! Keep up the channel 🙏🏼

  • @TapDancingOnYoFace
    @TapDancingOnYoFace 3 роки тому +1

    sounds really good

  • @dominiccox5131
    @dominiccox5131 Рік тому

    What rear sway bar does this exhaust require

    • @Mk4heavenHD
      @Mk4heavenHD  Рік тому

      I was running JDM front and rear sway bars, not sure how the torment is with the stock ones.

    • @dominiccox5131
      @dominiccox5131 Рік тому

      @@Mk4heavenHD Thanks mate, the front sway bar is only needed for the manifold? not the catback right?