Hardwood floor nail down installation unfinished floor
Вставка
- Опубліковано 14 кві 2019
- Hardwood floor installation unfinished
Install Solid Hardwood Flooring white oak
We installed this white oak unfinished hardwood floor The wood is a 3/4 inch thick and 3 1/4 inches wide.
Hardwood Floor Refinishing New Jersey Installation, Repair, sanding
wixflooring.com/
Connect with us !
Like us on Facebook: / wixflooring
Follow us on Twitter: / wixflooring
Follow us on instagram / wixflooring
Gaaad I need a 10hrs version of this
When you get paid by the job and not the hour
He had stairsteps going all the way down the middle of that
Carpenter: How rough do you want you flooring?
Client: yes
I remember these days.
I'll say it like everyone else said it faster isn't better!
Perfetto per spaccarsi la schiena 👍🏻
Cea mai bună podea!👍
So you lay the hardwood out In the pattern you want and then start on the opposite side to actually nail down and Install? Trying to figure this out as I’m going to try tomorrow to put hardwood down In a room.
Never ending stair steps, hope someone wouldn’t do this to there own house
I betcha this guy has a tough arm, the old fashioned way.
I use one staple every 3’ +unless it’s really warped. T&G for a reason slick.
Nice tool👍
Those woods looks soft. I did hickory woods the nails hard to get all the ways down.
A professional
He nailed it
Get out
Nice job
I was working on my floor so fast that a year later I discovered a foot of my floor wasn't nailed down I had ran out of nails. Because it was my own house a guy that could fix it.
goodjob👍
Got it racked out!
Stairteps u need break up point longer boards to break patterns
good nes
Isso que é prática. 😳👏😷😷😷🇧🇷
Braceritos, contentos braceritos.
Okayyyeeee ammmm relooodedd
This is the problem with america. Do everything as fast as you can. When you prove you can do it with one that's what you get, one man.
No that's NOT the problem with America. It's the problem with money hungry hacks EVERYWHERE.
This American ALWAYS strives to build LONG LASTING QUALITY no matter how long it takes or how much money I make. I want my products to last a hundred years. 😳
Sounds like a typical liberal. Clueless as to how the "real world" works.
When he has to compete with non english speakers, you have to work faster... Or starve.
Typisch Ami immer nur schnell schnell und dafür nicht ordentlich und es hält nie lange
@@testosteroneinc.3800 it unfortunate, i am a Supervisor at a Shipyard, most of our workers are on visas. Their quality of work is sub par
@@testosteroneinc.3800 must be tough being you and having to compete against people that have not had your entitled life ya racist ass hole.
Molto bravo👌
what?
este guy presume de rapides. y apuesto a que se ha de haver tardados horas para acomodar todos los boards donde van! 😂😂😂
back surgery by 55... problem with some of these methods, failing to upgrade methods as technology permits... so that you aren't ruining the cartilage in your back and knees.
Nice stagger
There's stagger and there's uniform.
This is uniform.
Maybe you knew that.
This layout has the least amount of end joint spacing possible. On the list of best practices this is last.
My back hurts jus watching him lean forward 😣
It does hurt if you are not used to the job. =)
When you tell a worker to make nice random joints no closer than 8 inches.......a perfect 8½ inch stair step......SuNuVABii***!!!!
......but I did it sooo fast....😑
When my contractor has 6 jobs for me to get done in a months time I can hit everyone of them with 0 call backs with this method🤷♂️
Remember when your floor started lifting, creeking and cracking? This is why
Wrong! I know a few friends are in this business and they are as fast and my floors and houses that I recommended still good after years.
@@MrVuTran After two years?
@@devel-man Don't be an arse, I have been living here since 2012.
This is how all hardwood floors are installed?
Yes
Mantul
Good way have joints every 4"
👌
Wow I just watched it again it's way more than four rows horrible
great job.... fast n efficient work....
Quando o cara manja e outra conversa
A man that knows his trade... well worth his salt...
how can those seams be tight? Must be a mess, with space in between planks, right?
Super...WHAT'S THE MACHINE..??PLEASE
this is how it's done. good job man, let me know if you need work in NY.
Yes ..I wanna working in newyork budy.
Do you have jobs ? I do flooring Stalation
Way too many nails and if you look at the last four runs that he just worked on consistent stepping not cool half-assed work
All show
Ignore the negative comments, you did a great job. While I am not in this business and I installed the floor myself with the supervision from my friends (they're in hardwood floor business), the floor still solid after years. Their businesses are well known around Boston area as well.
Prolly took more time to set himself up for a 1 minute video than saving time (certainly not nails) going so fast. I bet the butt joints aren't joined 100% throughout the floor.
stair steps, otherwise, all good
Step 2 grinding a polishing?
Power cleats, really!? That floor is going to move!
No its not ...once sealed perfect..
Those are staples😏 1 1/2" * 1/2 OR 2" *1/2
👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
This just shows you the level of “I don’t give a shit” that goes into a contractor install. It’s all about speed, not quality.
Спешка нужна при ловле блох.
Чувак нормально бабос рубит.
This may be strange, but could this be even faster if put to music?
Probably not, but it might get another thumbs up with a good song. Probably get another thumbs down too so is a wash. Nevermind.
I would hate to be the one buying your nails
Not bad but to much room for error
Yes, that’s how hardwood flooring is installed in 99% of American houses and there is nothing wrong with it. It will squeak a little over time, but who cares, these houses are not built to last for centuries. Main goal is to build it fast, affordable and still make money in the process
Where’s the glue brother? They will open up within 12 months
What the slant lines for
Good bye his back
It sounds like a gun reloading
Is it me or is that hit with the hammer a little ruff on the corner but what the hell do I know I'm stupid
🥇👍👌😍
what lies underneath the wooden planks?
Plywood and between plywood and flooring is an underlayment specific for nail down installation, is a black thick paper.
@@wixflooring is that a good gun I have one just like it from harbor freight only used once looks like you use the crap out of yours I need to put myn to work looks like.
¿Cual es la gracia?
The oak boards are being nailed to the subflooring...the finished job isn't going to lift...
Way over nailing.
Hafta charge big money to tear that out.
Just because you're fast doesn't mean you're good. Rip it up let's try again.
Really .. why do you say irs wrong
Whats his problem. Is the devil behind him? What a fool.
It saves the client money... and the man earns a lot more by doing it quick and well..
@Anna Wolffinger sounds like buĺl... ro me...
To much stair stepping
zuuu
What he did in this video would have taken me six weekends. And it would have looked like sh*t.
이게 뭐야 어디에 박는거야
우드 마룻바닥 시공시 45° 각으로 ㄷ 자 스테플이 박히면서 밀착시켜줌
외국은 home depot 에서 공구를 렌트해 줌.
해봤는데 허리 끊어지는 줄..
Nice
You staircase the pattern. No good.
Wow, this is bad work. It’s sad that he doesn’t even know he is doing a bad job. Most people are clueless.
Dude need to learn to separate your joints better it looks like there’s steps down the floor
Показуха....
Too many nails risk splitting the board.
What absolute hack work. Dude take a little pride in your job or go build dog houses.
Guy only interested in speed. Not good.
Hmm, do you think he has done this before...that is what an efficient, highly skilled installer looks like..and it doesn't perform for no 15$ per hr...
Horseshit, that's a hack job and I've seen plenty. You don't have a clue what you're talking about. That's fast and sloppy.
That's why the floors in my brand new house move people tried to go fast it's always quantity over quality why try doing some quality
Horrible way to lay flooring and horrible spacing. Never follow what this guy's does. If you want to lay floor faster then him just dump it on the floor.... faster and lasts as long.
All the joins so close together, should be random
All these flooring experts 😂 the floor will be filled and sanded before finishing. Relax keyboard pros
I Swear Man🤣The Comment Section Be Filled With A lot Of These "Know It Alls", They Always Hating On Someone's Work
Yeah I Know The Floor Is Gonna Be Filled And Sanded, Cuz I Personally Do These Types Of Floors All The Time As Well, And Yes They Do Hold Up Up Overtime 👍💯