The Weirdest Week I've Had In A Long Time!
Вставка
- Опубліковано 11 лип 2023
- So I got a call, but I definitely need more calls
Subscribe / @mattsoffroadrecovery
Watch MORR Videos:
What Did You Do To My Wrecker?
• What Did You Do To My ...
Too Sketchy For A Van On This Trail!
• Too Sketchy For A Van ...
I Stripped The Bombi Down To Nothing!
• I Stripped The Bombi D...
Extreme Recovery Putting My Life At Risk!
• Extreme Recovery Putti...
Impossible Recovery... That's What They Said!
• Impossible Recovery......
The Bombi Will Never Be The Same After Today!
• The Bombi Will Never B...
You Should Never Go Here! Off Road Waterfall Rescue
• You Should Never Go He...
Need a cool Hat, T-shirt, or Rope:
Matt's Off Road shirts, hats, hoodies, keychains and stickers!
www.mattsoffroadrecovery.com
Matt’s rope of choice 30
Matt's Recovery Rope by Yankum Ropes
www.mattsoffroadrecovery.com/
Matt’s Straps, how we tie down our vehicles
mattsoffroadrecovery.com/coll...
10% Off Discounts with our Friends: Use Promo Code MORR
Barnes 4WD
www.barnes4wd.com
Yankum Ropes
yankum.com/
Rock Slide Engineering
rockslideengineering.com/
Flog Industries
flogindustries.com/
Yukon Gear & Axle
www.yukongear.com/
Full Throttle Battery
fullriverbattery.com/battery-...
Jeep Cherokee XJ bags, we use ours for first aid.
www.amazon.com/gp/product/B07...
Follow us on Facebook!
/ mattsoffroadrecovery
Follow us on Instagram!
tinyurl.com/y6pkp3mg
Please like, subscribe, and share!
Thanks for watching, from all of us at Matt's off-road recovery! - Авто та транспорт
Matt's off-road recovery: "Even when we remember gas we forget gas."
Ah I see what you did there
"whatever kind of gas, we forgot it"
You're going to have to keep Tom in the shop. He tests equipment before getting in the field. That's unacceptable. 😂😂😂
Edit: It's okay, he forgot the gas. He's a team player after all.😂
Lol😅
Remember, Tom forgot the bring the gas.
And his gas gauge isn’t accurate, plus he said he was going to make do with a temporary fix for the welder’s plug. Sounds like he is channeling his inner Matt.
Ahahahhahahahahahhahahaha
LOL!
Warms my heart to see Rudy helping out. Still miss Trevor and Tucker and Eric as well.
Same. Time for reruns.
Rudy's camera help makes me forget about those other guy's 👌 thanks for helping Rudy...
Wait Eric left as well?
@@evmexia88 I haven't seen Eric since the Christmas Party video, but that's not unusual. I think he's still running Winder Towing.
@@evmexia88 I’m pretty sure he’s gone
Dude with double master's degrees driving a truck entirely made of leaf springs welding stuff out unprepared in the boonies and being saved by gigachad Rudy.
Love you, Tom!
It's always good to see Rudy every once in awhile😎👍
He has his own channel too but I agree its good to see him on here !
@@sideview79 whats his channel?
@@david_atsoc Rudy's adventure and designe
Got to have at least one person that comes prepared. "Rudy you have a regulator? Yes."
And Janelle .
Watching Tom plan and execute a recovery is so relaxing compared to the normal "we left the keys, we have no gas, we forgot the ropes, etc." 🤣
Edit: Never mind 😂
Edit killed me🤣🤣🤣
Just all around better without Matt's obvious directives trying to make himself look smart.
@@jaxonpetersen9994 R.I.P
Cookies better then pie - ugh WRONG!!!
Ditto
Go Colin Go! I have had 10 orthopedic surgeries and can walk like a young man. Hang in there Colin. Your recovery will payoff the rest of your life.
I prefer flux core for outdoor stuff, the slightest wind blows the shieling gas away. That suitcase welder is SWEET, I need one. Rudy to the rescue, keep making birdhouses Tom, love you in the Spectrum commercials...
That needs to be the next Matts off-road recovery shirt. A bunch of Tom quotes like “keep that window down if you need to puke”
Doing very engineer like things with all of this preparedness and testing. Nice 🙂
Isn’t he an engineer tho? That’s literally how his brain works
lol. front side is just Tom's face, back side is a ton of quotes.
And : "We didnt come to see the dogs" :)
Watching Rudy and Tom welding together on a repair is great 👍
But you aren't welding your transmission😅
Most guys would be too grumpy to do remote welding. Thank God for optimistic people like you guys😅
Even if you would have failed at least you tried. Most people wouldn't even try what you guys do. That keeps us watching for sure. I have driven a washboard road a time or two.😅
Apparently they don't make steel like they used to?
Just nice to see the Rudy guest appearance
Always good to see Rudy....and his dog. I love that little stinker.
Tom, you and Rudy did great with what you had and where you were. Guess it's a great excuse to build Dig Doug for mobile welding and trail recovery.
Rudy's The Man. I'm always impressed with his abilities.
Just as I thought Tom's pre-flight checks represented a new chapter for MORR, he confirmed the fuel gauge didn't work and brought it all back to normal again. 😁
The smartest and most professional recovery team on you tube.
All thanks to the smartest great team leader (almost like he has magic powers)
Matt. 🤔
@@theuglytruth8162 hey! You're back!
Still jealous of Matt!
lol, why are you here?
Did Matt hurt your feelings once?
Can't let it go?
lol, jeez man, move on with life, this obsession just isn't healthy or a good look for you.
@@theuglytruth8162 I watch a couple asset recovery guys that make these guys look really unprepared they scout the target and any obstacles so they can swoop in hook and book 1s from around their neck of the woods
11:47 -- I like that quick close up of the welds and the reaction from Rudy and Tom. You did good boys! You guys need to start wearing capes to these repair jobs. Saved the day once again!
Rudy coming in clutch, and we know he is busier that a 1 legged man in a but kicking contest! Respect.
Even without a single Morr Rig they made it work, well and Rudy saved the day !
Rudy.....was never the same since you left. Great to see you still around on this channel (as well as your own channel)
It's always good to see Rudy every once in awhile. Rudy's The Man. I'm always impressed with his abilities..
I believe someday his channel will be just as big
It’s great to have friends like Rudy around it makes life a little brighter and better. Way to go y’all.😉👍♥️
Rudy isn't a friend, he is Matt and Jaymie's eldest child. It is good to see him working with MORR because he worked for his father when the channel started.
@@roberthudson1959 Rudy is Matt's son, but Jaymie isn't his mother. Rudy's mother lives in Canada, she and Matt were divorced.
You'll want to bypass the CO sensor. Everyone who gets the 9500 Predator ends up doing the same thing because of how sensitive the sensor is. Takes about 5 minutes to do!
That way it'll run great back at the shop when they forget it. 😂
You should make a youtube video of how to do that.
@@philbert006Or they will remember to bring the generator and forget to fill it up. 😂
@@makpsv damn. I laughed way too hard at this 🤣
@@mylifethaidiy7045 Ah, no. That could make the YTer liable if some idiot then goes and kills himself with CO.
The perfect clip to insert when Colby (sp?) was worried about getting car-sick would have been Garth Agar with his folded paper cup saying “here - if you have to spew, spew into this.”
Watching Rudy and Tom welding together on a repair is great . Janelle always makes the scenery look better.
That was a "Rad" comeback😂
Get em Rudy! Tom is really tryin with the fabricobblin, but when in doubt call in Matts 1st lieutenant🎉
Always a top bonus when Rudy makes an appearance in a MORR vid, thanks Rudy.
He just needed Trevor to make it perfect 😂
That generators exhaust is covered in the truck bed it has a auto shut off when the exhaust doesn’t take air!!! Nice to see Rudy again
I see Tom is living up to the MORR tradition of always forgetting something 😂
Unlike the Boyscouts their motto is never be prepared
Love your narration, Tom. You do a great job! Loved the welding and leaving those folks much better off than the way you found them.
Flux core is kind of crumby and dirty, but it works. For off-road welding, it's one less thing to worry about.
Versions of it are used extensively in industry.
You just need to have plenty of time using it before you start making good use of it.
Flux core or stick welding is solid. Sure, it will splatter more and you have slag, but out in the wind I’d rather have a well working flux core than a gas mig.
Another fun video of what you guys do for people. Welding a trailer so it can get home while in the middle of the desert. Great stuff.
Rudy's The Man. I'm always impressed with his abilities.. Watching Rudy and Tom welding together on a repair is great .
Im not a welder or able to do even a fraction of what you guys do, but the blurred welds have me rolling... haha
Maybe you could keep an emergency roll of Flux core with your welder.
Good to see Rudy doing good and the commanche looks amazing.
His channel is gaining traction someday it'll be as big and he'll have his own shop with his knowledge and drive he'll have a very successful business with all the cool fabrication equipment
That tool suited for Thor is called a wood splitting maul. I used to associate "maul" with the damage done by beasts, but it derives from the Latin malleus (hammer). At the Battle of Agincourt, mauls were used by longbowmen to hammer tent stakes, but the pointed end plus the heavy weight made them a great improvised weapon. I first learned about this tool in a catalog; interesting to see one pop up in an offroad recovery video!
I learned about the maul when I was 6 or 7 when I was old enough to go to the woods and be around the chainsaws and buzz saw splitting firewood to load the trucks and trailers
Tom you did a great job with what you had. Good to see Rudy coming to help. Take care and God bless you ❤
Cut the white and green wire and the white wire on the carbon monoxide sensor and wire them together. No more problems with the generator. ( They might be different colors on yours but that worked on my predator.) It bypasses the sensor completely.👍👍
I just used a foot of pipe to extend the exhaust and never had a problem since
I share Rudy's sentiments. You were there to recover a broken trailer, not re-fabricate and rebuild a poorly designed one.
AGREE! Major fail! That POS trailer will probably break and kill someone. They better think twice next time when doing repairs like this. At least there is proof out there that this trailer was now fabricated by Matt's off road recovery and they now own all liability to that trailer. It's one thing to do a temp repair to get someone back to civilization. Totally different when you rebuild something for someone and you have no idea how it will hold up to their abuse for the rest of it's service life. MAJOR FAIL!
Crafty sasquatch? Wow you are a total douchebag.
@@CraftySasquatch It's almost like you didn't see the video at all over your rabid barking. It was made very clear that the repair job WAS "a temp repair to get someone back to civilization" and NOT a high quality rebuild made for punishment.
@@CraftySasquatchyou're a goofball. They have no liability. He literally in the first minute of this video says it's temporary. Get a life and get off youtube comments 😂
Baby Rojo Beard to the rescue!
"Keep that window open, in case you need to puke" ('CAUSE I AIN'T STOPPIN')
So wise , Thank You . Good to see Rudy and Janell to the rescue . A fine trail repair
They should have just used the remainder of the truck frame to build the tongue instead of using smaller material. My father built a homemade trailer like this in the early 80s. They heated and bent the truck frame to make an A-frame and welded it together. The trailer is still being used today. 😊
Rudy, Trevor and Lizzy were always fun to watch. It’s good to see Rudy.
I miss Tucker :(
Trevor and Tucker just started a new channel called MisAdventure Labs.
😂 blurred out the bad welds 😂 too funny
Someone needs to show Tom that you can extend a Hi-Lift just by pulling up on the handle when it is vertical instead of needing to pump it from the ground to the lift point. Saves a ton of time. (^_^)
_EXACTLY_ ! Typical rocket scientist ~ all the gear and no idea!
I noticed that too lol
@@dancarter482 Nuclear engineer actually but yeah.
How awesome is that suitcase welder?!? Never heard of such a thing.
Karnage Welder. Up and running in no time and no gas or batteries required.
They're pretty awesome little setups for quick trail repairs till you can get back to the shop to do it better
@@davidwoermansr You'd be surprised ;) I welded on my hydraulic steering ram on my buggy 2 years ago and it held till just last month.
@@JoeOBremski I welded a hydraulic lift cylinder on our hay feeding tractor after it snapped in half used a flap wheel to smooth it out to not totally wreck the seal hoping it would last 2 weeks till the new cylinder came in and it lasted 4 months till it was well above freezing to change it (we figured we better change it before loading the turd hearse since a bucket full of cow flop is heavier than a round bale of hay) we still have it in the back of the shop as a spare just in case not much about welding surprises me except how some people get certified to weld pipeline and government jobs yet can't look a welder over to figure out how to turn it on and adjust it to weld I've hired 2 of those idiots and fired them within a half hr of their first day and replaced them with kids fresh out of high school
Tom, you have learned the low gasoline scenario from Matt very well. It is great to keep the company tradition alive.
He had plenty of gasoline just no welder gas
"All's weld that ends weld" 😂
Hahaha!
When I saw Tom test the new generator and welder I was just thinking "but does he have some gas in it??"
Then I thaugh " it's TomTom, he probably have a jug with him, and it's probably full tank already"
- I was wrong...
😂
I think MOFF needs a nice new BBQ pit for the shop, and that Tom should have to build it with only metal, tape measure, grinder and the oldest stick welder you can find..
Also, it's okay Tom, I once took a two hour drive and two hour boat ride to pull a boat out of mud and forgot all of my pull ropes at my house.
Life Lesson - Either fully test your setup before you leave or don't bother testing at all. You were so close to using the welder before you left but you didn't so you didn't realize you were missing part of your setup.
I thought he was using flux core wire
@@mrwilson7617 flux core is the business for a mobile setup.
I mean do you "fully test" your car before you drive it every time? ABS? Thermostat? Maf sensor? He tested the things he built on the day. He forgot a thing. That's different to testing what you built.
@@zyeborm Always check the two step in the pits
@@zyeborm Yes, I do actually. As soon as I turn on the key. If anything fails the test, I get a check engine light. :)
Nice work by Tom just to get everything ready to go, and excellent save by Rudy.
Great cooperative rescue, Rudy and Janelle are great people!!
I noticed the New Yellow Toolboxes. I missed that Video..very cool
That is what happens when you are in a hurry! You always forget something important! Thanks to Rudy you got it fixed!
"Rudy Rescue" I Love it when a plan comes together!
I would Love to see more Videos with Tom & Rudy Great Combo !❤ We Love Rudy's Channel too !!!❤
Matt gives everyone a slice. Decent man. Tom is a legend. Living the American Dream.
He's a bloody dickhead trying to take over everything,and he knows f/ all
I legitimately thought to myself, the one thing they don't have is spare gas.
That suitcase welder makes my heart go pitter patter.
Karnage Welder for the win!
This is gotta be one of my favorite ones. I hope to see more modifications recoveries on dig doug.
Good effort TomTom! It’s not easy to grab everything in a rush and not forget something especially when it’s not the usual recovery vehicle.
The way everyone supports everyone else out there is great! Rudy to the rescue! 😁
I've been a welding instructor for about 25 years now, and Tom, I can tell you for certain that straight argon is not capable of making any sort of GMAW weld outside of aluminum, which is why it was welding so horribly. Although that was all on Rudy for bringing the wrong gas. Best solution would be to use a self shielded wire for jobs like that.
Nice job. Great to see Rudy and the Comanche (good thing that Tom forgot the gas...made for some great teamwork). [oh, and I would choose a "victory pie" over a "victory cookie" most days]
Wow that is very interesting recovery. 😮. Working on the fly. Gotta love it.
Fiskars. The best warranty in the game.
If you break a tool you can just take a picture of it send it to them and they will replace it. And the quality is second to none. I think I own about 10 different axes and hatchets. Love them all. And they take an edge. Whenever possible I always buy Fiskars. They even make wood handle.
they have the skills and the tools all they need is to hire a checklist maker/checker. great to see Tom's can do spirit regardless and Rudy helping out like a champion!
Yep, gasless fluxcore is the duck's guts for trail repairs. The tensile strength is actually higher than mild steel with gas. You just have to run it electrode negative and drag it like stick. Your Miller box should run it just fine (find the knurled wire feed rollers you should have got with it.).
we run that 200 Suitcase with flux core, it does a great job!
I weld the same with flux core as I do regular wire and never had a problem
@@davidwoermansr you have to push with gas because the penetration is lower, pushing helps with that. You have to pull with fluxcore otherwise you will get root inclusions, same as with stick. Unless you’ve done test pieces for coded certification you might not know. There’s also dozens of different flux core wires with very different types of flux.
@@Chrisamic I've been certified since 1990 in the early 00s I was underwater certified (till an auto accident made it so I can't get dive certified then I let that go) I don't weld any different with flux core than regular and never had any problems with penetration and never had a weld failure yet I've had the steel rip an inch from the weld on a heavily overloaded pickup bed trailer (dumped 6.5 tons of scrap steel out at the iron yard) we loaded it on my miniexcavator trailer used the loader to flip it upside down behind my trailer then back on strapped it down took it home and welded a patch over the broken spot
@@mugmisowhat welder did Rudy bring? I’m interested.
Testing before use is a must, good going. In the world of heavy machinery testing is everything. If we test all the systems and systems separate and together our success rate is close to 100% proven time after time, and many years proven experience. Getting all the stuff for field repair is always a crapp shoot, we once had a helo come and deliver tools, parts, manuals, and stuff we just thought we needed. This situation the helo delivery method was cheaper that holding up the progress we needed, time machines, labor, and reputation was at stake. Ten-4
It was good to see Rudy helping out. Looking forward to TomToms bird house
5:41 oh my! So prepared huh ... made my morning of searching for my glasses so much better. LOL!
Flux core: no gas needed! Great to see Rudy helping out, the crossover episode we all wanted.
I think we all know Janell was the real hero in this recovery.
😎
She's definitely the eye candy 👌 🇺🇸 American made !
Cookies for the win!
@@Lambert_Lifecringe
@@saginawdan😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😅😮😮😮😮😮😮😅😮😮😮😮😮😅😮😅😮😮😮😊
Suitcase welder for the WIN!!! Now, time to furnish the Bannana, Moorvair and the Bombi with a suitcase welder!!!
And spare gas cans.
Or just get one Karnage Welder since it's portable. Toss it in the rig hitting the trail that day. Even in the back of SxS... Hmm... Yellow MORR CanAM in the future? :) Rapid Response Recovery Vehicle!
Atta boys. Adapting to the situation and making it happen. Good job men.
It was nice of Rudy to help you guys out of a bind.
Btw, Alan from the Sparks Motors crew and his own Mnt. Fortress Labs channel has a combo generator/welder from Harbor Freight. One of those might be useful for the MORR crew.
Are you talking about the wizard from the UA-cam commercial channel
The next build should be an off-road gas station.😂
Rudy is as awesome as his father, and Tom is getting better at helping Matt's off road recovery, good job guys
It's awesome to see Rudy again and helping out.
Nice to see Rudy help out. Good work Tom.
You guys need to change your name to Matt’s gas less off-road recovery! 😁
I’d love to see a video outlining the setup on each vehicle. Engine, trans, transfer case, axles, gears, lockers, suspension, bumpers, etc.
Dear Tom tom, after having fought a battle with an 83 suburban fuel gauge, replacing the fuel sending unit etc..I learned that on the back of your fuel gauge, is a ceramic resistor that goes across 2 of the three studs. It should read about 90 ohms when bench tested off of the gauge. If it's an open circuit it will cause weird fuel level readings. Hope this helps 👌
MORR should have a pre-trip checklist that includes fuel for all pieces of equipment involved in a mission.
Rudy forgot his superhero cape
“That’s not going anywhere” - you guys kill it!
How about a link to that Suitcase Welder. That thing is awesome. Talk about compact.
Love watching Rudy he's definitely a solid guy 💯
It won't be long and his channel will be just as big and he can buy/build his own shop with all the fancy fabrication tools he's got the knowledge and drive to have a very successful business
great recoveries TOM and great to see Rudy and girlfriend..great rescue for the guys..need a spare fuel ⛽️ can in your arsenal...
Toms the man! You guys went your whole lives not knowing you were actually tv stars in waiting haha! Thanks!
Janelle definitely needs to make her own channel
She's always helping Rudy
You wouldn't be the Only one of the Fans of her channel if she had one
@@jasonb6570 💫
Considering the whole situation, Tom should get a pass on forgetting the gas for the welder.
Yes I agree, the end result is what counts, how you get there is optional. As the saying goes "There is more than one way to skin a cat" Rudy is a legend, a young man any parent would be proud of.
@@seanworkman431 No way. He was 30 seconds away from actually TESTING the welder with a generator it's never been with before. The most likely time for a welder to not work is when you actually try to weld with the fricking thing. Discover the bad tip! No gas! Feed roller bolluxed. It's like Tom has never been to a rodeo before. Never mind the fact that MIG is not the right process for the middle of an open plain, or for heavy steel.
@@brianwelch1579 MIG is just fine for that job, it's a trailer remember.
@@brianwelch1579 they got the job done! I am sure Tom will prepare himself a better better emergency mobile kit for the future, MIG is just fine and if it was a more desperate situation the exhaust from a vehicle can be used as the inert gas, super bodge but it will work.
@@brianwelch1579 Cat equipment is mig welded even the big dozer blades and the field techs mig weld wherever you break down at 90% of the time most farm equipment is the same way
an unexpected RAD colab video is never unwelcomed! Good to see the Bronco in action when it can be too.
Great recovery guys. God bless you all.
Nice to seem how confident Tom has become in front of the camera! Gradually, he will be an equal co-host with Matt :) Very entertaining episode. Btw. what is the year/model of Tom's truck? I am into these old square body vehicles and this one looks top.
Like most it's a Frankenstein or like the song 1 piece at a time
Looks like TomTom wants to be better than Matt in planning for a recovery but surprisingly he fell short. More practice I guess
He just got MORR practice
You two are easily the best duo on MORR
My husband and I watch this religiously together and I am out of the country for 6 weeks. I had to ask permission to keep up from afar. He told me he had been keeping up😂😂😂 of course he was…Love you guys! Keep it up!🫶🏻
Janelle always makes the scenery look better
Too wide in the beam.
@@vigunfighterNOOOO! 😂
thiccc 🍑