I can vouch for these, I purchased my bike with a set of eBay levers (they do the job but I wouldn’t recommend) and threw these bad boys on and absolutely love them!
Why paying all that and you don't get a brake lever dust cover? Great design and I actually ordered a set which the brake lever is on back order but just curious as to why that is not included with the brake lever.
@rmatvmc if you guys sell them is it possible for you to send me a link to these levers? I want to purchase matching levers and the hydraulic clutch for my banshee.
@rmatvmc thank you. I'm very new to all this stuff! Just to be clear if I was to order a pair of F4 levers for my yamaha banshee, the clutch lever would fit both the stock clutch perch and the Magura hydraulic? I'm just trying to not F this up.
Awesome video!! Great products!! We run them on our Montesa Trials bikes and highly recommend them!! Thank you for sharing!! This type of video has inspired my family to start a UA-cam channel and Moto Trials Team!! What started as a pre diabetic father trying to find a good way to exercise, has turned into something completely different!! Join my 3 sons, my wife, and I as we embark on our journey!! follow our progress during our 1st season in 2021!!! Official team video release coming 11/2020!!!!
The first link in the description will take you to a page where you can purchase these levers. Clutch Lever: www.rockymountainatvmc.com/parts/asv-f4-series-pro-model-clutch-lever-p Brake Lever: www.rockymountainatvmc.com/parts/asv-f4-series-brake-lever-p
I need help on my clutch, I looked up a lot of video's about how to make the clutch pull easier but I didn't find anything that really helps, I cleaned out my clutch perch and lever, cleaned the cable, and checked the clutch itself and everything was all good nothing needed to be replaced, but for some reason my clutch lever is still hard to pull in and I don't know why
Sorry, we do not have this lever available for your bike since we don't have the KLX150 here in the states. But you may be able to find what other bikes use the same levers and make something work.
Do you mean master cylinder? As long as you enter your bike information on the product page and it shows it will work, you won't need to change anything except the lever.
There are levers like these that use higher quality pivot bearings and have an adjustable reach which both make the lever easier to pull. But a high quality adjustable lever like this will be useful and make riding easier for kids and adults.
It's hard to say how much you'll notice but I would say it will at least make your clutch pull smoother and in turn making it easier. Being able to adjust the reach of the lever will help your hand not get fatigued as easily and with the sealed pivot bearing it will make your lever pull more smooth. But make sure your clutch cable is lubed up first to see if that will help at all.
Rocky Mountain ATV MC hey chase , my 18 crf450 tough to pull , curious if this would help ? Also looking at the magura hydro clutch , curious what you use or would suggest ? Thanks chase
You should set your sag every few rides. You can check it every ride if you want to. I never hurts to do so. We have a great how-to for setting sag if you need some instructions. ua-cam.com/video/ZXCOoy9T0vc/v-deo.html
Hated the asvs they felt cheap and did not fit good on my 17 ktm250sxf. I bought arc levers and man they are nice and fit like oem. They are also made in U.S. unlike China asvs
Kalinka Red .... asv or arc in-breakable levers are great to have if you’re out on a ride... with no replacements (stock) and no parts dealer on the trails...
DO NOT go near ASV levers. They dont answer any customer service issues and they dont uphold warranties. They are being chased out of the UK for these reasons. This company tried to amalgomate a bunch of fitments into just a few Knuckle types not long ago and have messed up massively as nobody can get their brake switches working correctly with them anymore. They are absolute chancers. Avoid.
I can vouch for these, I purchased my bike with a set of eBay levers (they do the job but I wouldn’t recommend) and threw these bad boys on and absolutely love them!
Thanks for the info!
@@rmatvmc how much for d bar n levers assembled...
I love everything about these except the price
They are made in China, you can get them from china yourself for half the price on Aliexpress. I paid $40
True I only I was rich...
Can you do a vid on installing them on a trx450r? Not sure on what to do with the clutch safety wire
Can you put this on a yfz 450? Quad
Wow nice I need that lever
Why paying all that and you don't get a brake lever dust cover? Great design and I actually ordered a set which the brake lever is on back order but just curious as to why that is not included with the brake lever.
I just ordered some for £50 it says “clutch brake lever” will I get both or just one?
@@Liamh-ch1vr that's just for the lever, both would be around $150 or so depending on what site you order from.
@@jaredamoroso8273 I ordered them from grandado
You only ordered the brake lever 150 for both I just got mine
I have dual asv on my pitter very nice
Do ASV make a lever for a megura hydraulic clutch for banshee?
ASV make a couple options that fit, C6, F4, and F2 series will fit.
@rmatvmc if you guys sell them is it possible for you to send me a link to these levers? I want to purchase matching levers and the hydraulic clutch for my banshee.
Check them out here: www.rockymountainatvmc.com/parts/asv-handlebars-controls
@rmatvmc thank you. I'm very new to all this stuff! Just to be clear if I was to order a pair of F4 levers for my yamaha banshee, the clutch lever would fit both the stock clutch perch and the Magura hydraulic? I'm just trying to not F this up.
@@308chewy ASV claims they will work with the stock perch and the Magura Hymec Clutch.
Awesome video!! Great products!! We run them on our Montesa Trials bikes and highly recommend them!! Thank you for sharing!! This type of video has inspired my family to start a UA-cam channel and Moto Trials Team!! What started as a pre diabetic father trying to find a good way to exercise, has turned into something completely different!! Join my 3 sons, my wife, and I as we embark on our journey!! follow our progress during our 1st season in 2021!!! Official team video release coming 11/2020!!!!
And do they fit all bukes
Can anyone tell me why levers like the Midwest apparently change engagement points with the temperature of the engine, but these and others do not?
What about the clutch safety switch??
Wont they just break by being forced upwards
FOR AN RMZ 250 2020 I JUST NEED NEW LEVERS RIGHT DOMT HAVE TO GET NOTHING ELSE WITH it?
will these work on my 1982 honda xr100
Do you carry these for cruisers (Yamaha Vstar)?
Where do you get the purchase for them in can never find them
The first link in the description will take you to a page where you can purchase these levers.
Clutch Lever: www.rockymountainatvmc.com/parts/asv-f4-series-pro-model-clutch-lever-p
Brake Lever: www.rockymountainatvmc.com/parts/asv-f4-series-brake-lever-p
Will these work on a 2020 yfz450r atv?
Did they work ? I'm looking to put them on mine I have same exact one
Will these work on a 2005 raptor 350
Will these fit a 2009 ktm 125?
I need help on my clutch, I looked up a lot of video's about how to make the clutch pull easier but I didn't find anything that really helps, I cleaned out my clutch perch and lever, cleaned the cable, and checked the clutch itself and everything was all good nothing needed to be replaced, but for some reason my clutch lever is still hard to pull in and I don't know why
Check your push rod and actuator arm
If you have heavy duty springs that could be a reason
Will just the lever work for stock clamps and if that do where can I just get the lever
Nice vid
Which one fit 2008 LTZ 400?
The F4 and C6 Series will fit your model.
@@rmatvmc will the c6 pro clutch fit for sure? Because on the web it says it does not fit
@@ocasion3051 P/N 1348080001 Should fit. On both our website and the ASV website they fit your model.
Is it possible for my KLX 150 BF?... Is it fit?..
Sorry, we do not have this lever available for your bike since we don't have the KLX150 here in the states. But you may be able to find what other bikes use the same levers and make something work.
@@rmatvmc Well, thank you.. Hope you will have a product that can help me in building my bike into Supermoto 🔥🔥🔥🏍️
Do I need the top break caliper for these levers or can I use my old one?
Do you mean master cylinder? As long as you enter your bike information on the product page and it shows it will work, you won't need to change anything except the lever.
@@rmatvmc yes, whoops. Thank you
New to dirt bikes, do they offer clutch lever with diff ratio (easier to pull for kids)?
There are levers like these that use higher quality pivot bearings and have an adjustable reach which both make the lever easier to pull. But a high quality adjustable lever like this will be useful and make riding easier for kids and adults.
Do you recommend any brand of shorty vintage style leavers for a 1975 Suzuki tm 125
Do they make a clutch pull easier?
It's hard to say how much you'll notice but I would say it will at least make your clutch pull smoother and in turn making it easier. Being able to adjust the reach of the lever will help your hand not get fatigued as easily and with the sealed pivot bearing it will make your lever pull more smooth. But make sure your clutch cable is lubed up first to see if that will help at all.
Rocky Mountain ATV MC hey chase , my 18 crf450 tough to pull , curious if this would help ? Also looking at the magura hydro clutch , curious what you use or would suggest ? Thanks chase
Will it work for a db17 Tao tao ?
I am not very familiar with that bike. I would ask Tao Tao or do some research on what other make of dirt bike levers may work with your bike.
Will these fit the crf100f?
No, sorry these levers are not available for the CRF100F.
@@rmatvmc what about a 2020 CRF125F please
My bike came stock with brake away levers and they broke off
Wrong kind of brake away lol 😂😂😂
Hey if had my bike for 2 months and ride track every weekend when should I set my sag. I'm a bigenner to a race bike off if a ttr 125 what do I do
You should set your sag every few rides. You can check it every ride if you want to. I never hurts to do so. We have a great how-to for setting sag if you need some instructions. ua-cam.com/video/ZXCOoy9T0vc/v-deo.html
Will it work on a Husqvarna 2015 TE 125cc?
Yes, we do have these levers available for the Husqvarna TE 125.
@@rmatvmc Cool! Thank you :D
me gusta podrían enviarme un par para Perú
Newbie question, do i need specific levers for hydraulic clutch systems? i have a KTM 125sx 2003
Yes. You would need a specific lever for that clutch. - Chase
Hated the asvs they felt cheap and did not fit good on my 17 ktm250sxf. I bought arc levers and man they are nice and fit like oem. They are also made in U.S. unlike China asvs
Yeah ARC's are the best by far. There's a reason why you see a ton of pro's running them.
Why you have to be that one guy that dislikes
I don't think the asv levers are worth 120 dollars I'd rather just have standard levers and if they break it's like 20 bux to fix them
Kalinka Red .... asv or arc in-breakable levers are great to have if you’re out on a ride... with no replacements (stock) and no parts dealer on the trails...
Buy from wish u get it 30$
I am 15 got my first bike 6 months ago, I wannna buy these as they don’t break and as I upgrade to bigger bikes I’ll just switch them over
First like
DO NOT go near ASV levers. They dont answer any customer service issues and they dont uphold warranties. They are being chased out of the UK for these reasons. This company tried to amalgomate a bunch of fitments into just a few Knuckle types not long ago and have messed up massively as nobody can get their brake switches working correctly with them anymore. They are absolute chancers. Avoid.
do they fit a 2020 kx250?
will this fit on a 2003 Cr85R?
On our site we only carry the brake lever for your bike but ASV does have the clutch lever available for your CR85 as well!