Paint job is awesome from start to finish. But imagine that car in dark red or black paint with this gloss. It will be sick. Show room quality paint job.
That is the best bodywork and paint I have ever seen on a C3 Corvette. No one at the factory could have imagined just how good a Corvette would look with a custom paint job. Outstanding!
Luck is all around. The Corvette owner is lucky to find a superb craftsman. You are lucky to get a job like this to showcase your skill. We are lucky to witness the job in fruition.
Said it before and I'll say it again you are at the top of your game in refinishing been in this game many yrs your a joy to watch mukka cracking job 😉😉😉😉
The only other thing i'd like to see from your videos is a step by step in the description of the steps. just a quick run down: Body filled and blocked car with 180, epoxy primer, block with 180, clean with water based cleaner, slick sand, flash, 2nd coat, block slick sand 180 then 220, up to 600 as per can instructions, clean and tack, 2k urethane on top, block urethane with 180 then refine with DA up to 600 grit, top coat and clear. This would help make things easier for guys like me that are new to painting cars! Great videos altogether, i'm learning alot!
I knew this was going to look nice when it was painted but you've taken this one to a whole new level, the reflection from the booth lights you can see just how flat you have got the panels and seeing as they are fibreglass it must have been a long and difficult process, simply amazing job Kandy Man🤯👌 Love the colour as well it just looks right on this car, I know it's the original colour so do you have the code for it by any chance please🤔huge thanks Mr K Man👍John UK
just a small nuance that some people may not pay attention to-- ive seen so many painters on youtube that lay panels like doors and fenders flat or horizontal when they spray them off the car. not understanding that with metallic paints if you want the flop to look consistent along the side the car, you have to spray it as if it was bolted to a car. So laying a vertical panel like a door flat or horizontal when spraying it can cause your metallic to want to pull together and mottle more easily. Especially if you are a heavy sprayer that likes to lay the clearcoat real heavy, which people tend to do when a panel is laying flat because they know its less likely to run. Kandy man does it right IMO!
Show car paint job it's all in the prep. I did one yrs ago stripped it gell coated it than blocked it out by hand two and a half gallons of leaquer 90% prep = guaility job.
Damn my italian/ sicilian brother.. didn't know u only had 5k subs! I'm in kinda of early.. nice paint job.. so you drop coat after everything is painted.. must be nice. Im a rattle can pro, can do a hood anything and it looks great & its always metallic paint too. Anyways, i have to dropcoat asap each piece before there's any drying. One time it landed on flashed paint and had adhesion issues with the dusting for the clear or it was crap clear. It was a cheapo job.
I have an 81 that I am dealing with. I am not a fan of the collector edition look of the car at all, but good video. It would have been better a different color, but you like it , so all is good.
I wish I could have the chance to work with you on a job, I know i would learn so much . I been prepping and spraying for about 2 to3 years now , been showing the guy that trained me all of your videos and he's even impressed and amazed by your skills in the booth
Excellent work and so satisfying (and appreciative for you to share ) to be able to watch the whole process. Can you kindly post up air pressure & gun settings for sealer/base & clear
What booth is that? And, size? It’s perfect and wide for room to get around the car and hanging parts. Most a see ar 14’. That booth is like 30’. It’s very nice and suitable for working on larger older classic cars.
can you do a video on how to tint the white under base coat on a pearl white when its off a little bit? Usually we pick the closest variant when we buy from our paint supplier, we dont all have a mixing system bank like you guys, some of us have to buy from the paint store and depend on them to make it right, How can i tint the underbase or how can i get a camera scan to get the closest match? Usually ive been adding drops of black.and using a spray card to tweak it but sometimes im off on the undercoat
@@kandyman5315 i do that but the base coat under is always off a slight bit, usially i buy a pint, what wld be the best way to get the undercoat the closest? I usually been adding some black to tint it but sometimes doesnt work, also sometimes my paint store doesnt have any available chips for those variances and end up getting me the standard variant
@@thescbaron just for clearcoat / solids is all they’re really needed for. Basecoat no problems. Battery is supposed to be good for a long day from memory and looking at them online. 10 to 12 hours ?
At 8:00 it looks like you missed painting the underside of the fender......My C3 is like that as well, that's why I know to look there....nice job otherwise!
The job is great but how does the shop make any money on these restorations unless your client base has unlimited bucks. Isn't there more money in fixing smashed Teslas than redoing old Corvettes? My best friend has a body shop and he routinely is asked to paint some old vehicle and he always refuses as they are money losers.
Outstanding!!!!
Excellent job I like your work!!!
Ive been painting for 30 pluse years and think You're a legend ❤
Appreciate the support
Wow!!
MR.Kandy Man ,just wow that vette looks clean and straight !!🤤💯💪💪
Appreciate it
Paint job is awesome from start to finish. But imagine that car in dark red or black paint with this gloss. It will be sick. Show room quality paint job.
Very nice that customer will be and should be very happy
this looks like a dream. What a nice color.
That is the best bodywork and paint I have ever seen on a C3 Corvette. No one at the factory could have imagined just how good a Corvette would look with a custom paint job. Outstanding!
Wow, thanks!
Brilliant job by a top painter thanks for sharing 👍
💪💪👊
Luck is all around.
The Corvette owner is lucky to find a superb craftsman.
You are lucky to get a job like this to showcase your skill.
We are lucky to witness the job in fruition.
Holy smokes. Beautiful job
Damn, man. You can't find an imperfection. That looks killer. I would've liked to have seen the drop coat. Great video and beautiful work.
Thank you
Flawless 👌
Beautiful paint job 👏 👌 on my favorite body style Corvette. 👍👍
Thanks 👍
You asked, "what do you think?" B E A utiful
Thank you
Absolutely fabulous, ice work Kandy Man
👊
Said it before and I'll say it again you are at the top of your game in refinishing been in this game many yrs your a joy to watch mukka cracking job 😉😉😉😉
💪💪💪👊
@@kandyman5315 😉😉😉😉😉😉😉😉
@@deanbrown7643 there you are 😊
@@jc2200 Hi jc now you've watched him you'll know what I'm talking about he's one state over from you
@Dean Brown yeah but all of us are running out as we speak so I'll stay put till something gives
Beautiful!!!
Wow, beautiful!
Thank you
Beast!
Wow beautiful paint job.
Incredible workmanship 👌
Thank you
The only other thing i'd like to see from your videos is a step by step in the description of the steps. just a quick run down: Body filled and blocked car with 180, epoxy primer, block with 180, clean with water based cleaner, slick sand, flash, 2nd coat, block slick sand 180 then 220, up to 600 as per can instructions, clean and tack, 2k urethane on top, block urethane with 180 then refine with DA up to 600 grit, top coat and clear. This would help make things easier for guys like me that are new to painting cars! Great videos altogether, i'm learning alot!
Impeccable technique
The paint job looks oem the day it was painted back in the 80s. Great job, Kandy Man
Thank you for the support
Wow, that looks amazing!
10 out 10 paint job!
Very nice good job
I knew this was going to look nice when it was painted but you've taken this one to a whole new level, the reflection from the booth lights you can see just how flat you have got the panels and seeing as they are fibreglass it must have been a long and difficult process, simply amazing job Kandy Man🤯👌
Love the colour as well it just looks right on this car, I know it's the original colour so do you have the code for it by any chance please🤔huge thanks Mr K Man👍John UK
👏👏👊
Killer job!
Dam man straight as an arrow 👍🏼👍🏼
Thanks brother 👍
Absolute top job, great explanation of what’s going on, just awesome
Awesome job sir!!
Thanks brother
just a small nuance that some people may not pay attention to-- ive seen so many painters on youtube that lay panels like doors and fenders flat or horizontal when they spray them off the car. not understanding that with metallic paints if you want the flop to look consistent along the side the car, you have to spray it as if it was bolted to a car. So laying a vertical panel like a door flat or horizontal when spraying it can cause your metallic to want to pull together and mottle more easily. Especially if you are a heavy sprayer that likes to lay the clearcoat real heavy, which people tend to do when a panel is laying flat because they know its less likely to run. Kandy man does it right IMO!
Absolutely correct I could not have said it better 💪
Yep
Looks beautiful 💪
Smashed it, pretty work!
Badass bro!!! High quality man!!!!
Awesome job. Recommend getting some painters goggles with the replacements shields.
Awesome job and very helpful information!!!💪
Thanks for the feedback
Zero waves on the body. Prep is 95% of an awesome paint job. 1982 GM paint booth: Hold my beer. Hahaha
Awesome
looks amazing, you do quality work my man, have a great weekend
Thank you sir
Nice work... Just found your channel. Sweet color!
Whole process was great, excited to see the rest of the build and the final reveal.
Man I wish you a hundred thumbs up, that is a beautiful job. Watch all the time but first time to comment.
eye candy done right
You flow like water bro
Great job 💪💪💪
Looks amazing 👍
👊👊
Awesome job
Looks amazing
Thank you
Your hands are magic! This think is wet...
👊👊
Hard work pays off!!
👍🏾👍🏾👍🏾👍🏾👍🏾
Looks Fantastic.
Show car paint job it's all in the prep. I did one yrs ago stripped it gell coated it than blocked it out by hand two and a half gallons of leaquer 90% prep = guaility job.
New sub here! Dean, lead me on to you! I must say he's right on point! Great job!
Thanks for watching 👊
in future videos, can you share the approx. cost to do this type of restoration respray?
At least 15k or more is my guess, maybe 20 in his area
As expected a stunning paint job 👌, plenty off cleaning prior too paint is a must 👍. jim uk.
Damn my italian/ sicilian brother.. didn't know u only had 5k subs! I'm in kinda of early.. nice paint job.. so you drop coat after everything is painted.. must be nice. Im a rattle can pro, can do a hood anything and it looks great & its always metallic paint too. Anyways, i have to dropcoat asap each piece before there's any drying. One time it landed on flashed paint and had adhesion issues with the dusting for the clear or it was crap clear. It was a cheapo job.
Lpp👊👊
I have an 81 that I am dealing with. I am not a fan of the collector edition look of the car at all, but good video. It would have been better a different color, but you like it , so all is good.
I wish I could have the chance to work with you on a job, I know i would learn so much .
I been prepping and spraying for about 2 to3 years now , been showing the guy that trained me all of your videos and he's even impressed and amazed by your skills in the booth
Clean job what's the gun settings
Wide open fan ,fluid 29 psi
Kool
Excellent work and so satisfying (and appreciative for you to share ) to be able to watch the whole process. Can you kindly post up air pressure & gun settings for sealer/base & clear
What booth is that? And, size? It’s perfect and wide for room to get around the car and hanging parts. Most a see ar 14’. That booth is like 30’. It’s very nice and suitable for working on larger older classic cars.
30 ×30
Very nice 😮 Do you like 2021 over 8152
For the money
100 dollars more 8152
@kandyman5315 yea it's pricey,I thought 2021 was more
No 8152 is more
can you do a video on how to tint the white under base coat on a pearl white when its off a little bit?
Usually we pick the closest variant when we buy from our paint supplier, we dont all have a mixing system bank like you guys, some of us have to buy from the paint store and depend on them to make it right,
How can i tint the underbase or how can i get a camera scan to get the closest match? Usually ive been adding drops of black.and using a spray card to tweak it but sometimes im off on the undercoat
Bring a piece with you where you get your paint and match it there
@@kandyman5315 i do that but the base coat under is always off a slight bit, usially i buy a pint, what wld be the best way to get the undercoat the closest? I usually been adding some black to tint it but sometimes doesnt work, also sometimes my paint store doesnt have any available chips for those variances and end up getting me the standard variant
Smackola
Very slick, paint and bodywork, nice colour too.
So painting without the versaflo, flat battery ?
Ha, that battery won't last long enough for a job like that.
@@thescbaron just for clearcoat / solids is all they’re really needed for.
Basecoat no problems.
Battery is supposed to be good for a long day from memory and looking at them online.
10 to 12 hours ?
@@lesskinner8588 Mine lasts about 4 hours. Has been like that since new.
Just curious how many coats of the clear did you use on it ,looks fantastic .
2 coats
For your gun set up for base what was it thanks
Wide open fan ,fluid 16 psi
What was the cost for the paint job?
10 -15 thousand
So after the 600 grit do you always spray a sanding sealer. Is that one of the keys to a beautiful finish. ❓
I always seal my jobs, gives it a uni form surface for the base coat
As lways
Can you recommend a product
Check house of kolors wet on wet sealer
At 8:00 it looks like you missed painting the underside of the fender......My C3 is like that as well, that's why I know to look there....nice job otherwise!
Lol not all coats were filmed thank for watching
you do all the prep work at your shop aswell?
👍
Stunning paint work! Masking job looks like 💩 tho! What'd they use, like 5 miles of tape at $10 a roll?
Tape is the least of are worries
To bad you play music while you spray. Spray is music to people trying to learn to paint like Kandy Man
The job is great but how does the shop make any money on these restorations unless your client base has unlimited bucks. Isn't there more money in fixing smashed Teslas than redoing old Corvettes? My best friend has a body shop and he routinely is asked to paint some old vehicle and he always refuses as they are money losers.
Tesla is are bread and butter but these are good fill in jobs and I enjoy them brings back memories
Top notch painter and you can tell
Appreciate the support
Hi bro, I am sell mi 2 iwata Sr2 clear and base coat obs, If you are interested write to me at private