Does Lifting your Truck Ruin its Ride Quality? | Ford Raptor 3 inch Geiser Lift
Вставка
- Опубліковано 23 жов 2021
- I know there are quite a lot of Ford Raptor purist out there who feel the engineers at Ford should never be questioned and the trucks suspension should never be touched. However, what if your truck suits other needs besides just mobbing in the desert? Is a stiffer ride really such a bad thing? In this video we lift my Ford Raptor by adding Geiser Coils and Icon Leaf Springs paired with Baja Kits Upper control arms.
Check Out www.northwestrides.com for more cool overland builds. - Розваги
For anyone looking to do this to their Raptor:
-The front bolts for the leafs should have come with that box that you were holding. That hardware kit should also come with bump stop spacers if you're still using the stock bumps. Ford installs the bolt "backwards" during assembly. A sawzall/ grinder will do the trick to take the old bolts off.
-IF you're using stock bump stops, you should also be buying the bump stop plates from Icon as the stock strike pad is integrated with the stock lift block.
-The two bolts in the center that hold the leafs together should be cut down after install. They come in long so that you can add the add a leaf if needed. Failure to cut the bolts will result in it hitting during full compression.
Appreciate the content Max! Take care
Hey good looking out, I'll pin this comment. I should have updated the vlog but it was a hectic day, we did find the two bolts and installed them like you are saying. We didn't cut them down though 🤔 Also, I will be adding some aftermarket bumpstops soon! Just hitched up my crawler to the Raptor and it sits so much better with a load on there. Can't wait to see how it tows!
@@Maxx.Powell no worries Max 🤙🏽 I have icons on my Gen 1, and the rear end is pretty jacked up too. It did settle about 1/2 inch after throwing in my tire rack but it is what it is. Love the ride and it doesn’t look as raked as it did when I installed them originally. and yeah those two center bolts need to be cut eventually lol. Maybe you can get around to it when you get bumps! Just keep the maxxidents to a minimal until then 😂
If i am doing option 3 do i still have to cut the bolts down on the leafs?
“You’re married. You ain’t got all day.” 😂.. Obviously the mechanic doesn’t know how awesome Des is..
The Raptor looks awesome with the lift, don't take the add a leaf off until everything has settled or you will regret it when you tow the Tacoma back on the trailer. Great job and keep up the good work!
Good advice. I think that extra leaf will be perfect when towing
@@Maxx.Powell
I agree, once everything is broken in you will be a happy "Overlander". The back end of that truck will be loaded up when you go on your overlanding trips and the springs will be perfect!
100 percent
“Ya this a Ford” lol
The amount of times "stiff" and "it feels really good" was said in this video made me laugh and shocked there wasnt a "that's what she said"
Happy to help and be a part of this build. Look forward to completing the Taco build ....and maybe a Tundra? Bring it! I don't play around!
“I quit school because they forced me to take recess”
Can’t wait to see more videos. Still my favorite channel.
I did an add aleaf on my last tacoma because i was towing a bunch, it settled after about a month or so. One thing i did notice was the rebound was a bit off so the back would hop over washbboards. I'd imagine the fox shocks can compensate for that tho. For the type of wheeling you do i think it will work perfect for ya. Keep up the awesome videos and hope the family is doing well. TTYL from Alberta Canada
Appreciate everything you do for us as a community and your family you have been pushing me to do more and better things for my family and my kids so thank you so much ❤ P.S. I want that raptor if you decide to move on from it.
Keep killing it brother! Love the content! New tundra would be dope plus you could be one of the first with the new generation.
Love the video!
been waiting see hear about the Raptor lift!
Love the putting it in your pocket start a new trend🤣oh yeah and all the great vids you always put out👍🏻
The coils and upper arms and deavers are normal for the pure off road baja guys that carry some extra stuff in their beds. Nothing wrong with customizing the raptors suspension a bit. Still functions like it should.
Now that the leaf packs have broken in, the Raptor is much more rounded all around. It rides much better with the extra weight over the bed
Nice setup and good piece of land!
Running the same setup on my Tacoma. Icon stage 3 with added leaf. I debated taking out the extra leaf but after adjusting my rebound I was able to slow the speed of the spring. Same weight bed rack/ikamper and now it feels great. Check your u bolts after about a week might got pretty loose once the leaf broke in. Leaf hack instead of C clamps I use the adjustable wood working clamps much easier to use 🤙🏽
Those wheels coming out of the shop reminded me of Judy Greer as Kitty Sanchez in Arrested Development; definitely needs an alignment. "Say goodbye to These! Michael..."
This Raptor is locking great! :)
Mostly a lurker man and almost always don't think about liking or commenting, but trying to do better. Just want to say that I think your channel is great and I watch every episode. I hope you don't totally get away from the Tacoma content since I have one and that's what got me into your channel, but even if you do, I'll still watch.....because you work hard and never forget to live! Thanks man.
Would like to see the new Tundra, but I just ordered a Bronco. Any more thought on getting a Bronco?
Those icons stage 3 are extremely still. I recently pulled out the thinner leaf down to stage 2 and it's perfect. Holds the weight but decent ride.
I like the new Tundra for sure. The TRD Pro or even the Trail model which is basically an SR5 with locking rear diff and crawl control (plus u can add the big 14" screen) would be more cost effective if you're gonna be one of the first to do a build on it would probably be a sick option
Can’t wait for those snow wheeling videos in the first gen Tacoma!!
I know what you mean about going hard in the summer. My wife and I are pretty tired, and actually looking forward to winter, when we slow things down a bit. And yes, some of our toys need some TLC, though fortunately, we don't have as many as you do to care for.
Hey do you have any thoughts on adding a Dobinsons Coil lift kit on a 3rd gen tacoma? Im keeping the lift pretty small 2-2.5" so I don't have to mess with brake lines etc!
It sounds singular to this lift. I would say it's a great way to add some size without going to crazy. A coil lift is better then a puck spacer lift for sure
I'd love to see you get and build a new Tundra! I agree that I don't like how they look stock and I don't like how electronic even the Toyota's are becoming, but some renders of modified Tundras look amazing.
Anyone know the name of the music piece at the end of the videos? Absolutely love hearing it…..I feel like I’ve heard it somewhere other than your videos……and I would like to see if it can be downloaded
I've been through several lifts. My current Long Travel setup with Radflo shocks is far superior to stock. But cheap lifts do ruin trucks ride. (Procomp, Rough Country, Rancho, etc)
The lift on the raptor looks cool. I think you should just give it some time and do some towing with it to see if the springs settle. I agree that you should go with the tundra next that would be pretty cool
I've been thinking about the Raptor->Tundra swap as well. The orange and lunar ones don't look as bad and I think a lift + bumper will go a long way. Disappointed in no 4A though, that's so nice up here in the mountains during winter where we have mixed snow/road and don't want to switch between 2H and 4H all the time.
Also congrats on the business! I know it's scary to leave a 'stable' career for the unknown, especially with a family, mortgage, etc. But it was clear from your previous video that the 'stable' job was adding so much more stress and trauma to your life, much more than the uncertainty of doing your own thing. Life is too short to suffer like that in the name of finances!
I definitely miss the vlog type videos
Always check the don’t forget to love channel for them exited for you to get back to some of those videos
New tundra would definitely create new video stuff. I kinda want one too. I agree that the frontend needs something. It is just to . . . Open . . .
I added rear air ride bag helpers on my 19 Tacoma. Works great with pulling a trailer and rear bed loaded down.
I can't tell you how much I can relate to you not having a place to work on my Tacoma. I can tell you if you're going to make yourself a place to work on it, don't skimp on size. I have a small garage here that I can drive my Tacoma into but cannot jack it up because it will hit the ceiling, and there's barely space on the sides to get around it.
Given how much land you have, just have a construction company put down a concrete foundation for you. You can go with a prefab building for your shop at that point or build it yourself. Those are my plans anyway. Heh.
I'm not much of a Ford guy but the Raptor does look better. Great work!
My father sent me this video off Facebook and I realized he was in it and I recognized he was working on the car with Max. If you wish to know I'm not giving his name he was the mechanic who said "I quit school man" and was wearing a dark blue hat.
It looks bad ass how is ur buddy's f250 working out
For him raptor looks great
Thanks for the video of beautiful Washington, and the trucks! Maybe some content with the Moses Lake sand dunes or content on a Ford Ranger (4th gen please) if possible. Thanks!
I live just up the road from that shop. Kind of a long drive from your side of the water! They must do good work 👍
You might need an old school jet ski for that pond.
That can sensor is not one to wait on mine went out and caused other issues cost me almost 5k to get it fixed due to the other issues it caused by waiting
That’s the overland truck store in Gorst. I almost bought a Tacoma from them a couple weeks ago but somebody snatched it up before I got there lol. Ended up with a white DCLB Tacoma from Renton.
Look goods. Look forward to the tacoma build
YOU ARE PRO BROOOO... LIKE YOUR VIDEOS.
Can't wait to see the Tacoma build
“Everything on that Tacoma I did myself” “yeah but it’s a ford” 😂😂😂 I worked at a ford dealer for a while and man they make stuff difficult for no reason sometimes lol
Do you know what the part number was for the bolt?
My wife and I were just in the PNW for our honeymoon, awesome country out there
Keep slapping the camera, or don't. Do whatever you want. Love the vlog style where you show your journey. Keep it up Maxx!
Broooo!!!! That raptor ended up so sweetttt!!!!! But I'm sure the back will settle more when you tow you tacoma back!
Would love to see you build a new Tundra! Don’t take the extra leaf out til it settles and you tow with it.
Any plans to build a shop? Not a mini shop. But a legit shop. And yes please get the new Tundra. You could make that a killer build. Has the full drop down rear window. That does it for me. Keep it up Max. Love the channel
Crankshaft and Camshaft position sensors are usually very easy fixes. Crankshaft sensor on my old 2005 Dodge Ram literally was a 5-10 minute swap.
You better get the TRD pro Tundra!! My dad got a new one and he loves it!!
Bro I’m trippin watching this! . I just discovered that store yesterday! I saw ur truck parked in the lot there. I have a 2021 raptor and I work at west hills ford in Bremerton! I used to have a 2020 lead foot like you!
Badass Raptor.
Defintely dont skimp on shop size. Atleast 16' wide by 30' long. Need room for tools and work benches.
Stoked on the raptor!
Gosh I love Washington's
beauty....
Hope to see some more offroading with your crawler as well.
Yes new tundra I'm excited
Dude this is a Ford. That was funny.
The new Tundra looks great on-road and off-road. Check out TFLtrucks video of the hybrid Tundra going off-road. Idk how long I’ve been subscribed but I’m super excited and happy for where you are at now.
why not the bronco max?
you seemed pretty into it
I do really like the Bronco but I need a full size truck and can't bring myself to sell my Tacoma so it's hard to justify the Bronco
You are going to need tall garage doors when you build your new garage/barn.
Fall is when your suppose to ride at least in the south Tennessee
The bolts go out on the leaf spring to not puncture the tank bro
I installed Eibach coils front and back on my Gen 3 they ride much better than the stock springs
Sick vid!!! I miss short hair Max. How’s Des liking the hair??
I think everyone always wishes the leafs didn’t settle as much as they did so I’m sure after you tow anything you’ll be happy with how it sits
Could have installed 1" drop shackles for the rear springs.
How about a Tiregate?
Loving the LONG hair
just a food for thought at 7:44 on your side view of the Raptor the front tire isn't straight up and down which will cause an uneven wear on your tires. The reason it is like that is because of your lift, you might need a new lower control arm to fix it.
Nah, just an alignment.
Sweet
Longer shackles could drop you an inch or two and allow the leafs to articulate better...or something like that.
Looks like you need about 100 yards of 3/4" road mix for the back road of your property
Maxx working on a man bun
Word bro
😂😂😂 I quit school because they forced me to take recess ffs 😂
I say SMACK THAT LENSE LIKE IT OWES YA MONEY😂
Max.... I built that taco
Mechanic... yeah this is a Ford
True that!
is that a 10barrel beer sir?
at 10:08?
You gave me shit on IG a couple months ago for recommending you beef up the suspension if you're gonna be towing and now look lmao
Those blocks are also the bumpstops.
You better have gotten some footage of the scavengers eating the meat in your pasture!!!
more videos every week will be awesome!
How is the dry aged Tim? Lol
Your married u don’t have all day hahaha
Having too much unsprung weight hurts general ride comfort. Thats why that VW bus was comfortable, it had such low unsprung weight that the suspension can work better.
Yes , TUNDRA! Do it
leaf springs will probably fix the engine light
It's hard to change the mind of a knuckle dragger 🔩🔩🪨🪨💪💪
the way he said this is a ford 🤣😂
Get the Tundra!
Looks perfect to me,Other than not being a Toyota lol
Your channel, slap the camera all you want. But hey, if you want to start ending with a crotch shot that's ok by me ;) hahaha.
Even after death the problem cow is still a problem lol 😆 😅 😂
The raptor is great and all but you really need a dedicated tow rig at this point.
Man seen your Raptor makes me regret selling mine 😒
Just go tow around with it for a couple thousand miles before you decide to take the helper springs out!! It will squat down more eventually.
BWAHAHAHA !!!!! heim joints cut down on squeezyness and maintenance BWAHAHAHA!!!! good joke!