Robert Simbaya The fire suppression system is good in any industry and all governments in the world should measure it and put it in operation to avoid property loss and lives
Hi, I have to service a kentec conventional panel with fm200 gas suppression system for vital rooms. I want to change the bateri es but still don't want the solenoid on the cylinder to be charged otherwise it will trigger the alarm. If i still power the panel off and change the batteries I am a bit scared of the surge when power is back on. If i isolate it with the pin that is attached to the fm200 bottle is fine, but I am a bit cautious because still might be a tiny surge to trigger the gas release. can you tell me if you can please how to change the batteries on a FA panel ? batteries are of a 12v dc 7ah yuassa make. Thx
CHANGING THE BATTERIES IN THE FACP DOESN'T DO MUCH TO THE SYSTEM. THE FACP WILL GET BATTERY TROUBLE JUST LIKE ANY OTHER FACP. MAKE SURE WHEN THE TROUBLE COMES IN, TO ACKNOWLEDGE THE TROUBLE, AND SILENCE THE PANEL. CHANGE YOUR BATTERIES ACCORDINGLY AND THE PANEL WILL GO BACK TO NORMAL.
THREE YEARS AGO AND NO ANSWER, HUH? BY NOW YOU SHOULD KNOW THAT BY CHANGING THE BATTERIES IN THE FIRE PANEL IT WOULD CREATE A TROUBLE , BUT THERE IS NOTHING TO WORRY ABOUT BECAUSE THE TROUBLE IS JUST A BATTERY TROUBLE. IF YOU ARE NOT COMFORTABLE DOING IT LIKE THAT BECAUSE OF THE BATTERY TROUBLE, GO TO THE TANK AND REMOVE THE SOLENOID OR ATTENUATOR, MAKE SURE YOU STICK A BOLT OR A SCREWDRIVER THROUGH THE HOLE OF THE SOLENOID OR ATTENUATOR. CHANGE OR REPLACE YOUR BATTERIES, AND DON'T FORGET TO "DATE" YOUR BATTERIES. BY NFPA 72 CODE, BATTERIES NEED TO BE REPLACE EVERY FOUR YEARS. GOOD LUCK!
INSTEAD OF EXPLAINING THE PROCESS, WHY NOT DEMONSTRATE STEP BY STEP HOW TO TEST THE SYSTEM? TESTING THE SYSTEM FOR INTEGRITY IS THE BEST WAY PEOPLE LEARN HOW TO IN THESE TYPE OF SYSTEMS.
yes maintenance people. never assume they know anything.
Robert Simbaya
The fire suppression system is good in any industry and all governments in the world should measure it and put it in operation to avoid property loss and lives
In NOVEC panel i am getting trouble in system charger fault. Can you explain me why it is?
Nice demonstration
Hi, I have to service a kentec conventional panel with fm200 gas suppression system for vital rooms.
I want to change the bateri es but still don't want the solenoid on the cylinder to be charged otherwise it will trigger the alarm.
If i still power the panel off and change the batteries I am a bit scared of the surge when power is back on.
If i isolate it with the pin that is attached to the fm200 bottle is fine, but I am a bit cautious because still might be a tiny surge to trigger the gas release.
can you tell me if you can please how to change the batteries on a FA panel ?
batteries are of a 12v dc 7ah yuassa make.
Thx
CHANGING THE BATTERIES IN THE FACP DOESN'T DO MUCH TO THE SYSTEM. THE FACP WILL GET BATTERY TROUBLE JUST LIKE ANY OTHER FACP. MAKE SURE WHEN THE TROUBLE COMES IN, TO ACKNOWLEDGE THE TROUBLE, AND SILENCE THE PANEL. CHANGE YOUR BATTERIES ACCORDINGLY AND THE PANEL WILL GO BACK TO NORMAL.
THREE YEARS AGO AND NO ANSWER, HUH? BY NOW YOU SHOULD KNOW THAT BY CHANGING THE BATTERIES IN THE FIRE PANEL IT WOULD CREATE A TROUBLE , BUT THERE IS NOTHING TO WORRY ABOUT BECAUSE THE TROUBLE IS JUST A BATTERY TROUBLE. IF YOU ARE NOT COMFORTABLE DOING IT LIKE THAT BECAUSE OF THE BATTERY TROUBLE, GO TO THE TANK AND REMOVE THE SOLENOID OR ATTENUATOR, MAKE SURE YOU STICK A BOLT OR A SCREWDRIVER THROUGH THE HOLE OF THE SOLENOID OR ATTENUATOR. CHANGE OR REPLACE YOUR BATTERIES, AND DON'T FORGET TO "DATE" YOUR BATTERIES. BY NFPA 72 CODE, BATTERIES NEED TO BE REPLACE EVERY FOUR YEARS. GOOD LUCK!
INSTEAD OF EXPLAINING THE PROCESS, WHY NOT DEMONSTRATE STEP BY STEP HOW TO TEST THE SYSTEM? TESTING THE SYSTEM FOR INTEGRITY IS THE BEST WAY PEOPLE LEARN HOW TO IN THESE TYPE OF SYSTEMS.
Thanks
well it was installed in 2012 never released yet
Hi nfpa
Don't test?
Fm200 Full fome
كيف تركب الاسطوانه
Heptafluoropropane