Nice one. I've been massively impressed with my P1S. I would recommend printing a riser for the top glass. The main reason is the tube rubs on the top glass and rubs away the tube / pits the glass. It will also allow you to have the front door closed for PLA as they have vents on them that you can open and close. and third you can put some extra lights in so you can see it printing better. And with the door closed and vents open its much quieter and it stays at around 35-37 depending on weather (am in the uk and no ac). Another good print is a little ramp for the front bottom just bellow the glass to allow easier clean-up. And finally some removal tools for some of the connectors on the back. Sometimes when you need to work on it removing these parts is a pain as the clips are facing the back wall of the printer so a tool is very useful. Look forward to more videos. Cheers.
@@plasmaDave I printed the "Siding Vents Riser" on maker world. Its low profile, has vents you can close / open, and is easy to print and you can still put the AMS on top if you want (mines on the side) and use the top glass. Just be slightly carful when lifting the glass as it can be tight and pull on the riser sometimes. I printed it a while back so used V1 but theres a V3 now. There is also a TPU gaskit but iv never printed it. Cheers.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Well that’s a jump in functionality and ease of use, hope you enjoy the P1S
Certainly is a lot better, not perfect but nearly.
Nice one. I've been massively impressed with my P1S. I would recommend printing a riser for the top glass. The main reason is the tube rubs on the top glass and rubs away the tube / pits the glass. It will also allow you to have the front door closed for PLA as they have vents on them that you can open and close. and third you can put some extra lights in so you can see it printing better. And with the door closed and vents open its much quieter and it stays at around 35-37 depending on weather (am in the uk and no ac). Another good print is a little ramp for the front bottom just bellow the glass to allow easier clean-up. And finally some removal tools for some of the connectors on the back. Sometimes when you need to work on it removing these parts is a pain as the clips are facing the back wall of the printer so a tool is very useful. Look forward to more videos. Cheers.
@@drdoomslab thanks for that, have watched a few videos on accessories. Which top vent did you use? There are so many to choose from.
@@plasmaDave I printed the "Siding Vents Riser" on maker world. Its low profile, has vents you can close / open, and is easy to print and you can still put the AMS on top if you want (mines on the side) and use the top glass. Just be slightly carful when lifting the glass as it can be tight and pull on the riser sometimes. I printed it a while back so used V1 but theres a V3 now. There is also a TPU gaskit but iv never printed it. Cheers.
@drdoomslab thanks I'll go and search for it 👍
don’t forget to calibrate the filament 😊
hi, good video, i want to buy one on new year eve
Am sure you will like it 👍
@plasmaDave im sure too
So waiting till new year!
Certainly goes way faster than mine.
Time for a new one?
@plasmaDave I don't seem to have a lot to do with mine.
matte pla is weaker than regular fyi 😊
@@HarrisonDavies so I believe, it looks good though 👍