I gotta admit out of all the videos that I have seen trying to figure out how to make these guys. Your videos have helped out the most. From my first custom to my latest ones there is a huge difference in quality and they look so much better, thank you so much for posting all the tips and tricks to help us out.
Hi, Thank you!! I am so glad you were able to take something from this video! That's what it's all about! Thanks so much for the comment and I wish you all the best of luck with your future projects!!
Haha I had to watch the video to remember! It was a painting of a lion I don't think I have any picture of that one with me. I'll have to ask him for some add at it to an update video. :)
I don't know what the hell I'd do without your videos showcasing how to ACTUALLY make a custom Funko Pop. Getting ready to start two of my own (Surfing Pikachu and camo Dutch from Predator) and these are exactly the tips/steps I needed. THANK YOU!!!!!
+Billy Raby Awesome!! :D if you are going to try sculpting use Testators Clear coat lacquer. it works best with super Sculpey clay. If you are just painting you can go ahead and use Krylon Crystal Clear. Hope that's not to confusing. Best of luck!!! :)
I’m glad to know that I’m not the only one who had the problem with the primer. I tried to prime a pop (this was my first time doing so, mind you) and when it stayed sticky you can understand my fear, lol
I just bought a Pop figure of the Titan from Titanfall 2. It seems very stiff and was wondering if there are any parts that can be removed. i want to strip all the paint and redo the whole paint job. I would just start pulling myself, but i don't want to break it by accident. mind you, this is my first pop figure, so I'm not sure what I can and can't do (other than it being like Munnies).
For the most part if there is a seam you can heat it up a bit to melt the glue and you should be a able to remove that limb. I haven't worked with that pop so I'm not sure what can be removed. Also you don't have to strip factory paint if you are priming the pop. Primer will cover there factory paint. Hope this helps a bit :)
This is my first custom and do some of the heads have different sizes because I've seen some where they switch the bodies and the head does not fit on so if that happens what do I do
+Team Super Awesome Art so I customs myself. not nearly as good as you lol but do you perfer sculpey clay over actual clay? sculpey seems to be the go to when it comes to customs.
+Danii Gibbs I do like Sculpey a lot. The reason being is they have a few different types of Sculpey clay varying in firmness. Also I know how Sculpey clay reacts to heat, paint , primer, etc. I'm not sure what you mean by actual clay though? Do you mean like an air dry clay? If so you have to be careful with air dry clay. they tend to shrink when they dry and that leads to cracking if used on a pop.
Hey Jenny how are u... I just wanted to give u a lil helpful pointer... u should use angelus acrylic paint when u paint figures. They have every color imaginable.... and its not gross like other acrylics
Great stuff , my question is is it safe to bake the Funko Pop figures in the oven just wondering if there isn't any toxins that would omit from what the company uses ? I know super sculpty is baked that way just curious before attempting. I use green stuff but it's more expensive but self hardens problem is it's very sticky when working with .
We use our home oven. according to the Sculpey website it is safe to use in your home oven. But I do suggest taking a look at the site yourself before deciding if it's something your be comfortable doing. They also make small clay baking ovens. they sell them on amazon and at craft stores. :)
Have you guys ever worked with Apoxie sculpt? I have some and I was wondering if it works with pops well too. Also, does the vinyl not melt in the oven?
My original character that i have has ginger hair and he kinda looks like Adlet from this anime i watched but its because its his second regeneration what funnko pop should i get to customize? forgot to mention hes a feminine male so would i use a female funko pop for it?
I would pick a pop hat most looks like your vision so that your customizing will be easiest. Funko makes a few anime style pops. I'd say look at those to see if you find something you can work with. You can use a female pop if it matches the look you are going for, I'd say try and pick one that already resembles what you are going for. Less work. :)
Hi i am thinking of making a custom pop figure and bought DAS modelling clay, what are your thoughts on DAS modelling clay compared to supersculpey clay, is there a big difference between the two? Thanks :)
+Zedito Fate I've never used DAS so I couldn't tell you if it will work to sculpt on Pops. Usually the way air dry clay works is once you take it out of the package the moister in the clay begins to dry out allowing it to harden. I found that this causes the clay to shrink slightly. The biggest concern would be once put the clay on the pop and it shrinks it might crack. Like I said I've never used that brand but maybe look into the product and find out if it tends to shrink. I hope this helps a little. Thanks for watching and let me know how it goes!! :) ~ Jenny
hi, I seen a lot of your videos and you have a great works, congratulations. I have a question about the baking the supersculpey in this kind of custom. How much time and what temperature do you use for baking the sculpey in the vynil figure?. I really fear to damage the funko and all my process on it. Thank you very much for these videos, It's a real help for me in this work. I see you from spain ( Sorry about my english). continue like this, thanks again!! I'm motivated to continue with more projects.
Hi thank you for watching :) You can use the directions on the back of the sculpey box and use the temperature it says there. Just watch your figure because all ovens are different if it's too hot lower the temperature and leave it in for 5 more min. or so. Your vinyl wont melt but it might get to soft if it's to hot so just watch the temperature. Best of luck with all your future projects!!! :)
Yes, with the female pop bodies being so small this is common. You have to be careful of how much sculpting you do on the head when the body is tiny. You can always build your sculpt with tin foil and then sculpt on top of that so that the sculpt is lighter.
I had to cut off and sand away a few parts from a base pop. I did my best to sand down the vinyl to be as smooth as possible, but of course it’s not as sleek as the surrounding, untouched vinyl. Will the difference in texture be glaring after I paint it? Should I try to sand it down more? (I’m considering putting a very thin layer of Sculpey over the sanded parts. Could that work?)
+Beast Mode121 Hey only some are bobble heads. I know all the marvel and star wars pops are bobble heads are for sure. Then there are a bunch of other once that are not bobbles. :)
If you have a smartphone and a Hobby Lobby nearby a great way to save money on clay and other supplies is to download their app. There is always a digital coupon on the app for 40% off any single item of your choice and is usable once per day. Not necessarily promoting Hobby Lobby but it can save a lot of cash. We have one just a few blocks from us and I use the coupon constantly
+Darth Deeznuts That's a Great tip! Thanks for adding to the comments! I don't have a hobby Lobby by me but there is a Michaels Craft Stores and they have the same type of deals! It's so worth at least checking to see if your craft store has an app or printing out some coupons before heading out.
that's weird I'll look into it and make sure I get it working. thanks for letting me know. you can try finding it if you go through the cideos on my channel. if you still can't find it. I'll send you the link. :) Thanks for watching and I'm glad this was useful.
hi! I am in love with ur guys work! I was wondering if u could recommend a POP! that would be great to use for a Bucky Barnes civilian? like the scene where he's buying plums, lol...thanks & I subbed to ur guys channel as ur tips help so much!
I dont like the grey hair on bride of Chucky Lady in the film it is jet black before she dyes can you tell me the paint I need also some steps to change Thank You x
Great video! I have several I want to make but don't have the money to commission them. I was wondering if you know how using apoxie sculpting stuff would work? I've seen several other videos using that, so I'm not sure if I should use that and paint it, because then I have more customization for my colors and no need to bake, or if I should bake and use clay, as it seems that's what most people do. Do you have any tips for either for a first time funko maker?
Do you know how to possibly sand the hands to make them smaller, but without totally destroying them? I got a blank doll, and I don't like how the hands are so big. Do you have any tips or instructions?
The reason I prime my pops is so that I'm left with a finish that takes paint well. Vinyl alone is too smooth. You don't have to prime but I find that not priming leaves you with having to apply more coats to get full coverage and in turn can result in lumpy paint. It all depends what is easier for you personally this is just what I do and what works for me.
it really would, like a classic doomsday with all his bones, i saw the shredder you guys did, i think you'd pull of Doomsday perfectly anyway, keep it up, love seeing what you guys make no matter what it is haha :)
Thanks man I really appreciate the support! hopefully in the new year we'll come up with some cool stuff. I haven't been able to post any new customs because everything we have made these last 3 months have been Christmas gift orders and i don't want to spoil any surprises by posting the video of finished Pop. :p So I'll be posting all those soon too! ~Jenny
Vinyl has a vary smooth surface and Acrylic paint will peel off of vinyl. In order to prevent this we prime our pops. Primer will stick to the vinyl and won't peel off. Then you can paint on top of the primer with Acrylic paint.
Hello :) thx for the great video!! I don't want my custom pops shiney.. more matte similar to the original Pops.. would you recommend the americana duraclear matte varnish or ultra matte? ^_^❤
Jewelry Bonney hey thanks for watching. I have never tride ultra Matt so I really can't say what it would look like. Bit I would think it would be more of what you were looking for. if you like you can try ultra matt and if you find you don't like it you can go over it with the Matt. I hope that helps some. sorry I couldn't speak from expirenc.
Does anyone know if you can you use Liquitex Prof Acrylic Heavy Body???? I know she uses soft but just wondering if you can use any acrylic type of paint.
YuriSama4 yes you can use any acrylic paint. The texture of your paint might be a little different but it should work just the same. You might want to thin out the paint with some water if you find it's ti thick. Best wishes with your project. :)
I'm looking to make an original tron funko pop. I think I'm getting a little over zealous but, I was wondering if you could give me some advice. I was going to try an make a clear resin in the body and head to act as the lines for neon. I was going to place a led light inside the pop. My question to you before I start working on it, are the bodies hollow? Will this work at all? Any thoughts?
The bodies are generally solid and the heads are hollow. thoough I have seen artist that do add light the body so it can be done. I'm not quite sure how you are going to use the resin making it hard to give advice on how to go about it. I hope this helps a little best of luck with your project!! :)
Yeah I figured I would paint on the decals of the suit and helmet and then cut them out. Afterwards I was going to make a clear resin to fill in those spaces putting the led light inside the vinyl doll. If it is sold it might make this much harder. I guess I will have to play around with the idea some more before I start. Thanks!
This is our first time making a custom. We’ve bought a Jessica Jones pop and we’re giving her a paint job to look like Toni Topaz. Should we sand it before painting?
I wouldn't recommend air dry clay. most tend to shrink when they dry so using it over a pop can cause it to crack. Best be is to go with a 2 part epoxy. Best of luck with your project!
Team Super Awesome Art actually i found a clay called apoxie air dry and its two part and all comments say it drys well and dose not shrink. thanks for the help :)
+jeff213ful I don't really use metallic paints very often. Just because the projects I've done haven't called for metallic so I haven't been able to compare brands. The one I have used before that works pretty well was the Folk Art Brand that I mention in this video. It's inexpensive and I got good results with it. Beast of luck with your project. :)
+Sam Nesselle You can just paint on a pop with out priming. It not an absolute must. The reason I prime to to make sure the paintwork will last and wont chip. Also the colors on the pop might come through so you might have to give it a few coats to get full coverage depending on the paint/colors you are using.
Quick question: the only color brands near where I live are Americana, Folkart and Apple barrel - I'm having trouble finding the right color for flesh tones (I need ones for a Caucasian pop and an African American pop) do you have any recommendations for a specific color amongst these specific brands?
Hi, If you can't find the color you are looking for you might have to mix to get the right pigments. So use a brown that is close to that you want and add white and reds and it will allow you to change tones.
![Custom Bo Peep Funko Pop 🐑 [ TOY STORY 4 OOAK ]](/img/n.gif)
I gotta admit out of all the videos that I have seen trying to figure out how to make these guys. Your videos have helped out the most. From my first custom to my latest ones there is a huge difference in quality and they look so much better, thank you so much for posting all the tips and tricks to help us out.
Hi, Thank you!! I am so glad you were able to take something from this video! That's what it's all about! Thanks so much for the comment and I wish you all the best of luck with your future projects!!
I'm a little interested in what the guys painting
Haha I had to watch the video to remember! It was a painting of a lion I don't think I have any picture of that one with me. I'll have to ask him for some add at it to an update video. :)
At what temperature should we put the oven so that the sculpey dries well and the Funko Pop is not damaged? Thank you
U can also boil water and put the clay inside. It will harden the same. Beats putting in the oven.
You can but I find sculpey gets very brittle with that method
I don't know what the hell I'd do without your videos showcasing how to ACTUALLY make a custom Funko Pop. Getting ready to start two of my own (Surfing Pikachu and camo Dutch from Predator) and these are exactly the tips/steps I needed. THANK YOU!!!!!
Very helpful and nicely done. I'll save this video for when I start with this.
I’ve looked at a few videos for this and this one is probably the best. Thanks
making my first tonight. you were so much help! thank you!!!
Thank you SO MUCH for this video. I just discovered your videos and this one in particular is super helpful. I can't wait to get started!!!
This is exactly what I was looking for! Thank you!
+Billy Raby Awesome!! :D if you are going to try sculpting use Testators Clear coat lacquer. it works best with super Sculpey clay. If you are just painting you can go ahead and use Krylon Crystal Clear. Hope that's not to confusing. Best of luck!!! :)
This is wonderful thank you so much for sharing.
thanks for this. i'm excited to try my first one soon and this was very helpful.
I’m glad to know that I’m not the only one who had the problem with the primer. I tried to prime a pop (this was my first time doing so, mind you) and when it stayed sticky you can understand my fear, lol
Amazing hun well done, I'd love a custom, to scared to try my self
Great videos with all the info I was looking for, thanks so much!
+Kelly V Thank you so much for watching, I'm glad it was helpful. Best of luck with your project. :)
Great video. You're custom pops are amazing!
+@InSoxWeTrust Thanks so much I'm glad you like them!! :D
Fresh prince Pop.... ohhhhhh sooooo dope!💯✔️✔️✔️💯
Thank you!!!
Thanks so much, I'm trying to make one for my wedding wish me luck lol
E
This video was so helpful! Making my first custom!
+phoenixphace900 Awesome! I'm so glad this helped you. Best of luck on your project!! :D
What airbrush kit do you guys use?
Your so talented and a genius thank you so much
Thanks for watching!!! Best of luck with your future custom!! :D
thank you for the tutorial :) i'm making esmerelda from hunchback of notre dame
I have a question, what would you recommend for gitd painting a pop? I primer my zero and painted him witb a spray paint oil base. And made him yellow
This was an awesome video, big help on trying to do one of my 1st custom funko pop . trying to tackle something no one has done .
+Alfredo Garcia Awesome, I'm glad this video was able to help you out! Best of luck with your project! :D
+Team Super Awesome Art
thank you for the reply and encouragement
Great video! Do you mind listing out the recommended product names/ details in a list? I couldn’t see some of the products. Thanks in advance!
Just watched this video and I am sure it definitely help
Awesome! Best of luck with your future project!!
YOU ARE AMAZING!
Thanks for the kind words! You are awesome! :D
This was very helpful
Awesome best of luck with your project!!!
When using the DIY funko, can I change the arms posture?
For example, turning one until it touches the "chin"
Thank you for the video! Even if it’s old at this point:)
Korri.Pre omg finally someone in 2020 lol I’m making a Harry styles one for my sister! Fingers crossed! 🤞
Does the vinyl has the same smooth texture after painting?
This is awesome! definitely saving and subscribing this, I gotta get all these tools to start a project!
What are you looking to make?
Until I get my tools, I really don't know where to start. I do have a few in mind like creating some Japanimation characters.
Nice! I'm new to this whole sculpting thing myself. Let's stay in touch. Would love to have someone to talk to about this process.
***** Yep!
I would like to make a diy funko of myself I think a personalized funko would be pretty dope
+Lou Fragliossi You should totally do it! :D
+Team Super Awesome Art it looks super hard for real
I'm very new to making custom pops. Is priming a must?
I just bought a Pop figure of the Titan from Titanfall 2. It seems very stiff and was wondering if there are any parts that can be removed. i want to strip all the paint and redo the whole paint job. I would just start pulling myself, but i don't want to break it by accident.
mind you, this is my first pop figure, so I'm not sure what I can and can't do (other than it being like Munnies).
For the most part if there is a seam you can heat it up a bit to melt the glue and you should be a able to remove that limb. I haven't worked with that pop so I'm not sure what can be removed. Also you don't have to strip factory paint if you are priming the pop. Primer will cover there factory paint. Hope this helps a bit :)
Hey, I was wondering if it is dangerous to bake the clay in the oven? I've heard some people say it's toxic so I'm not sure. Thanks!!
may I ask what temperature *you* use when baking & how long? really nervous about baking lol
I always wanted to see this because I wanted to buy a Do It Yourself Funko Pop
would you use epoxy putty? only i have some milliput left over from something else. thanks !
Yes you can. :)
thank you!
This is my first custom and do some of the heads have different sizes because I've seen some where they switch the bodies and the head does not fit on so if that happens what do I do
Can you guys match the exact skin color from the original paint? I have a pop that i was trying to clean a smudge and instead I ruined it.
I’ve heard while using super sculpy and baking your vinyl it can make toxic fumes is that true?
Do you do the plastic mold inserts?
Great video! do you have a way to create custom boxes for your pop vinyls?
Hi thank you I'm glad it was helpful. We don't make boxes but I think you can get templates online for pop boxes. :)
i love the shirt!!
+Danii Gibbs Haha Thanks!! :D
+Team Super Awesome Art so I customs myself. not nearly as good as you lol but do you perfer sculpey clay over actual clay? sculpey seems to be the go to when it comes to customs.
+Team Super Awesome Art if there is even a difference between the two lol
+Danii Gibbs I do like Sculpey a lot. The reason being is they have a few different types of Sculpey clay varying in firmness. Also I know how Sculpey clay reacts to heat, paint , primer, etc. I'm not sure what you mean by actual clay though? Do you mean like an air dry clay? If so you have to be careful with air dry clay. they tend to shrink when they dry and that leads to cracking if used on a pop.
Do you HAVE to Prime your figure? Say if you just want to repaint it's body do you have to? Thanks. Love the video by the way.
Do you think I could use hot glue instead of clay?
Hey Jenny how are u... I just wanted to give u a lil helpful pointer... u should use angelus acrylic paint when u paint figures. They have every color imaginable.... and its not gross like other acrylics
Hey I brought Funko Pop I saw my Funko face bottom look like bump . How fix of bump face bottom? Sanding ?? Pls tell me how and thanks
I just wondering how to build the head and the body?? Do you have a tutorial how it works the whole time? Did anyone know a link how to make it?
you have probably been asked a hundred times. But how did you make the fabric for the bandanas stiff and usable?
Let's say your figure has a long-sleeved shirt (a pretty thin one), would you be able to sand it down so it could be short sleeves? Thanks!
Yes you can. you might have to sculpt the short sleeve but you can sand down the long sleeve.
Would you recommend removing all the paint before baking? I can’t tell if you have removed most of it first? Thanks , great video and great help 😊
You don't have to remove the paint on pops. Some vinyls you do have to but not pops. You be find especially if you plan on priming the pop.
Thanks for the vid
+Just Magic Vids Thank you for watching and I hope it helps you out in some way :)
+Team Super Awesome Art could you do a tutorial on the controller and headset?
Do have more videos of the custom TMNT sculptures? I would like to see more detail on how u sculpted the heads and bodies.
Kiyon Kennedy link to the TMNT video. We have a Master Splinter video too :) ua-cam.com/video/qLfWNeYlCWU/v-deo.html
Great stuff , my question is is it safe to bake the Funko Pop figures in the oven just wondering if there isn't any toxins that would omit from what the company uses ? I know super sculpty is baked that way just curious before attempting. I use green stuff but it's more expensive but self hardens problem is it's very sticky when working with .
Do you need a separate oven to bake the figures or is it safe to use the one you're cooking with ?
We use our home oven. according to the Sculpey website it is safe to use in your home oven. But I do suggest taking a look at the site yourself before deciding if it's something your be comfortable doing. They also make small clay baking ovens. they sell them on amazon and at craft stores. :)
Can you use air dry clay?
Have you guys ever worked with Apoxie sculpt? I have some and I was wondering if it works with pops well too. Also, does the vinyl not melt in the oven?
Hi, yes we do use Apoxie from time to time and it works well with pops. And pops do fine in the oven at the temperature needed to cure clay.
My original character that i have has ginger hair and he kinda looks like Adlet from this anime i watched but its because its his second regeneration
what funnko pop should i get to customize?
forgot to mention hes a feminine male so would i use a female funko pop for it?
I would pick a pop hat most looks like your vision so that your customizing will be easiest. Funko makes a few anime style pops. I'd say look at those to see if you find something you can work with. You can use a female pop if it matches the look you are going for, I'd say try and pick one that already resembles what you are going for. Less work. :)
Team Super Awesome Art I only have one funko pop and that’s Amethyst from Steven universe
Hi! Did you have to remove the paint from the existing funko pops before sculpting and baking them? Does it not melt in the oven?
Hi no you don't have to remove the paint, just prime the pop before you paint. The pop doesn't melt because the temperature is not hot enough.
Would you mind telling me the name of the funko pop that you used the body from?
Hi i am thinking of making a custom pop figure and bought DAS modelling clay, what are your thoughts on DAS modelling clay compared to supersculpey clay, is there a big difference between the two? Thanks :)
+Zedito Fate I've never used DAS so I couldn't tell you if it will work to sculpt on Pops. Usually the way air dry clay works is once you take it out of the package the moister in the clay begins to dry out allowing it to harden. I found that this causes the clay to shrink slightly. The biggest concern would be once put the clay on the pop and it shrinks it might crack. Like I said I've never used that brand but maybe look into the product and find out if it tends to shrink. I hope this helps a little. Thanks for watching and let me know how it goes!! :) ~ Jenny
What was this filmed at, 12 frames per second? (Great video otherwise!)
hi im doing my first custom i got the diy one but when i paint it comes out with strikes how can i prevent that
you have to prime the diy pop first so the paint has something to stick to.
hi, I seen a lot of your videos and you have a great works, congratulations.
I have a question about the baking the supersculpey in this kind of custom. How much time and what temperature do you use for baking the sculpey in the vynil figure?. I really fear to damage the funko and all my process on it.
Thank you very much for these videos, It's a real help for me in this work.
I see you from spain ( Sorry about my english).
continue like this, thanks again!! I'm motivated to continue with more projects.
Hi thank you for watching :) You can use the directions on the back of the sculpey box and use the temperature it says there. Just watch your figure because all ovens are different if it's too hot lower the temperature and leave it in for 5 more min. or so. Your vinyl wont melt but it might get to soft if it's to hot so just watch the temperature. Best of luck with all your future projects!!! :)
I made a black canary pop but the head was too heavy for the body, have you ever had that problem and how do you solve it? Xx
Yes, with the female pop bodies being so small this is common. You have to be careful of how much sculpting you do on the head when the body is tiny. You can always build your sculpt with tin foil and then sculpt on top of that so that the sculpt is lighter.
@@teamsuperawesomeart4337 Thank you for replying, this was really helpful ^_^ xx
if you use an already finished Funko pop that you got from the store do you have to strip off the paint before you paint it again?
Libs nope I suggest priming it though. So that the paint sticks.
I had to cut off and sand away a few parts from a base pop. I did my best to sand down the vinyl to be as smooth as possible, but of course it’s not as sleek as the surrounding, untouched vinyl. Will the difference in texture be glaring after I paint it? Should I try to sand it down more? (I’m considering putting a very thin layer of Sculpey over the sanded parts. Could that work?)
did you prime after you were done sanding? that should get rid if the inconsistency.
Team Super Awesome Art No, I haven’t painted it at all. So a primer will even out the texture? Interesting. Thanks!
Yes the primer will give you an even base. If anything you can sand the primer and then re-prime if needed.
Have you ever customized Titan vinyl figures? I have been looking everywhere and it seems no one has done that yet.
I haven't worked on a Titans figure yet. It would be cool to see one though. :)
Im starting my own pop figure collection and why are yours not boble heads?
+Beast Mode121 Hey only some are bobble heads. I know all the marvel and star wars pops are bobble heads are for sure. Then there are a bunch of other once that are not bobbles. :)
Thanks :)
+Beast Mode121 Best of luck to you. :)
If you have a smartphone and a Hobby Lobby nearby a great way to save money on clay and other supplies is to download their app. There is always a digital coupon on the app for 40% off any single item of your choice and is usable once per day. Not necessarily promoting Hobby Lobby but it can save a lot of cash. We have one just a few blocks from us and I use the coupon constantly
+Darth Deeznuts That's a Great tip! Thanks for adding to the comments! I don't have a hobby Lobby by me but there is a Michaels Craft Stores and they have the same type of deals! It's so worth at least checking to see if your craft store has an app or printing out some coupons before heading out.
Very useful video! Your work is outstanding. One thing though: Your "updated sealant" link didn't work for me. But thank you for the video!
that's weird I'll look into it and make sure I get it working. thanks for letting me know. you can try finding it if you go through the cideos on my channel. if you still can't find it. I'll send you the link. :) Thanks for watching and I'm glad this was useful.
What pops are you working on now?
hi! I am in love with ur guys work! I was wondering if u could recommend a POP! that would be great to use for a Bucky Barnes civilian? like the scene where he's buying plums, lol...thanks & I subbed to ur guys channel as ur tips help so much!
I LOVE THAT IDEA
I dont like the grey hair on bride of Chucky Lady in the film it is jet black before she dyes can you tell me the paint I need also some steps to change Thank You x
Great video! I have several I want to make but don't have the money to commission them. I was wondering if you know how using apoxie sculpting stuff would work? I've seen several other videos using that, so I'm not sure if I should use that and paint it, because then I have more customization for my colors and no need to bake, or if I should bake and use clay, as it seems that's what most people do. Do you have any tips for either for a first time funko maker?
YOu can use Epoxy. We use epoxy but my personal preface is clay. You can use whatever you are most comfortable using they both work on vinyls. :)
How did you glue the head on?
E6000 glue works best.
Do you know how to possibly sand the hands to make them smaller, but without totally destroying them? I got a blank doll, and I don't like how the hands are so big. Do you have any tips or instructions?
You would have to cut the hands off and sculpt new ones. Vinyl is very hard to sand smooth because is it rubbery and not a hard surface.
Does hair spray work on sealing
Hey no not on pops unfortunately.
Did I really need to Prime it if I using the DIY POP?
The reason I prime my pops is so that I'm left with a finish that takes paint well. Vinyl alone is too smooth. You don't have to prime but I find that not priming leaves you with having to apply more coats to get full coverage and in turn can result in lumpy paint. It all depends what is easier for you personally this is just what I do and what works for me.
I'm doing my very first custom, I'm so happy and terrifying because for now I'm doing good...
omg, i know it must take ages to do these, but please do Doomsday haha itd be so cool! all your customs are awesome.
+ThePointlessSkills Thank you!! AND We were talking about that the other day Doomsday would make an awesome pop! :D
it really would, like a classic doomsday with all his bones, i saw the shredder you guys did, i think you'd pull of Doomsday perfectly
anyway, keep it up, love seeing what you guys make no matter what it is haha :)
Thanks man I really appreciate the support! hopefully in the new year we'll come up with some cool stuff. I haven't been able to post any new customs because everything we have made these last 3 months have been Christmas gift orders and i don't want to spoil any surprises by posting the video of finished Pop. :p So I'll be posting all those soon too! ~Jenny
oh awesome! looking forward to seeing them :)
Do you make & sell them? I would love one!
What do you mean by the paint doesn’t ‘stick’ to the vinyl?
Vinyl has a vary smooth surface and Acrylic paint will peel off of vinyl. In order to prevent this we prime our pops. Primer will stick to the vinyl and won't peel off. Then you can paint on top of the primer with Acrylic paint.
Team Super Awesome Art Ooh got it! Thank you!
Hello :) thx for the great video!! I don't want my custom pops shiney.. more matte similar to the original Pops.. would you recommend the americana duraclear matte varnish or ultra matte? ^_^❤
Jewelry Bonney hey thanks for watching. I have never tride ultra Matt so I really can't say what it would look like. Bit I would think it would be more of what you were looking for. if you like you can try ultra matt and if you find you don't like it you can go over it with the Matt. I hope that helps some. sorry I couldn't speak from expirenc.
Team Super Awesome Art Thank you😊 i'll give it a try!
Does anyone know if you can you use Liquitex Prof Acrylic Heavy Body???? I know she uses soft but just wondering if you can use any acrylic type of paint.
YuriSama4 yes you can use any acrylic paint. The texture of your paint might be a little different but it should work just the same. You might want to thin out the paint with some water if you find it's ti thick. Best wishes with your project. :)
I'm looking to make an original tron funko pop. I think I'm getting a little over zealous but, I was wondering if you could give me some advice. I was going to try an make a clear resin in the body and head to act as the lines for neon. I was going to place a led light inside the pop. My question to you before I start working on it, are the bodies hollow? Will this work at all? Any thoughts?
The bodies are generally solid and the heads are hollow. thoough I have seen artist that do add light the body so it can be done. I'm not quite sure how you are going to use the resin making it hard to give advice on how to go about it. I hope this helps a little best of luck with your project!! :)
Yeah I figured I would paint on the decals of the suit and helmet and then cut them out. Afterwards I was going to make a clear resin to fill in those spaces putting the led light inside the vinyl doll. If it is sold it might make this much harder. I guess I will have to play around with the idea some more before I start. Thanks!
I had that same idea on Tron! I wonder why Funko has not done it yet!?
I actually started my molds this weekend. Hopefully I will have something in the next week or so.
***** Looking forward to this.
I will do a medusa funko pop ♡
This is our first time making a custom. We’ve bought a Jessica Jones pop and we’re giving her a paint job to look like Toni Topaz. Should we sand it before painting?
Hi I'm so sorry for the delay, I just saw your question. You don't have to sand but I recommend priming your pop before paint.
great info here I'll be using awesome video. I may just be tired as hell but when ever you say figure I'm hearing figger.
Got any recommendations on air dry clay? I don't feel its a good idea to bake it. ☺
I wouldn't recommend air dry clay. most tend to shrink when they dry so using it over a pop can cause it to crack. Best be is to go with a 2 part epoxy. Best of luck with your project!
Team Super Awesome Art actually i found a clay called apoxie air dry and its two part and all comments say it drys well and dose not shrink. thanks for the help :)
Could I use model car paint
how do you put the head back on?
YOu can use E6000 Glue to glue it back on.
Just want to ask....what is the size of the funko head? Thank you in advance 😃
which metallic paint you recommend
+jeff213ful I don't really use metallic paints very often. Just because the projects I've done haven't called for metallic so I haven't been able to compare brands. The one I have used before that works pretty well was the Folk Art Brand that I mention in this video. It's inexpensive and I got good results with it. Beast of luck with your project. :)
Hi! Do you commission pops? I would love to make one of my old dog Princess! She’s knocking on heavens door 😖
Can we purchase a custom pop from you guys?
Do you have to prime it? Is it possible to just paint
+Sam Nesselle You can just paint on a pop with out priming. It not an absolute must. The reason I prime to to make sure the paintwork will last and wont chip. Also the colors on the pop might come through so you might have to give it a few coats to get full coverage depending on the paint/colors you are using.
+Team Super Awesome Art i plan on using black and dark grey over a red pop do you think that will work?
Quick question: the only color brands near where I live are Americana, Folkart and Apple barrel - I'm having trouble finding the right color for flesh tones (I need ones for a Caucasian pop and an African American pop) do you have any recommendations for a specific color amongst these specific brands?
Hi, If you can't find the color you are looking for you might have to mix to get the right pigments. So use a brown that is close to that you want and add white and reds and it will allow you to change tones.
and they we have official james bond pops.