Hello! Another fine video that shows the interest of the system chosen for the motricity of rear wheels. Thanks a lot to share. Have a good continuation. 😉👍
Thank you for the information. I guess the left and right outer axle are handed as the ratchet must be left and right? And is the spring fiberglass? I have only just come across your machine and like it's design
Oh wow I love this evolution of double freewheel from the earlier needle bearing / roller clutch. Honestly just before I saw this I "discovered" those single speed freewheel sprockets on ebay and was wondering if you can make it work screwing it the wrong way on a traditional hub. But this adapter to a 6 hole brake hub is really clever, meshing into the 18 teeth sprocket. It looks like the adapter to the hub as well as the clamp to the axle is 3D printed. Is that true? That should make it easy to replace. Also I'd be curious about the diameter of the rear axle, it looks larger than 20mm. Why so thick? I imagine so the 3D printed clamp to the axle is thinner. Also why do you have an outer sheath around the axle? And why in two parts?
Is even better than a differential, as a differential will send power to the wheel with least resistance, but this will ensure the power goes to the slowest wheel. So when a tyre starts slipping, power will go to the other tyre. You would need a limited slip diff to avoid this problem
!Videazo!🙂👍🏼 excelente iniciativa, felicitaciones, saludos desde Colombia.
Hello! Another fine video that shows the interest of the system chosen for the motricity of rear wheels. Thanks a lot to share.
Have a good continuation. 😉👍
mplementing the rear wheel differential!
hello very good tutorial I would like to know where to buy that complete kit please
Wow .wow think you men for this vidéo . Good job german👍👍👍👍👍👍👍👍👍👍👍
Gibt es die Achse inklusive Laufräder (ohne Federung) auch einzeln zu kaufen?
The art of combining freewheels with wheels.
If we make some improvements, I think we can drive 4x4.
Thank you.
Thank you for the information. I guess the left and right outer axle are handed as the ratchet must be left and right? And is the spring fiberglass? I have only just come across your machine and like it's design
Wow, it's good work.
Oh wow I love this evolution of double freewheel from the earlier needle bearing / roller clutch.
Honestly just before I saw this I "discovered" those single speed freewheel sprockets on ebay and was wondering if you can make it work screwing it the wrong way on a traditional hub.
But this adapter to a 6 hole brake hub is really clever, meshing into the 18 teeth sprocket. It looks like the adapter to the hub as well as the clamp to the axle is 3D printed. Is that true? That should make it easy to replace.
Also I'd be curious about the diameter of the rear axle, it looks larger than 20mm. Why so thick? I imagine so the 3D printed clamp to the axle is thinner.
Also why do you have an outer sheath around the axle? And why in two parts?
Very nice axe. Can I buy one?
como se llama o la marca alguien que me diga
Very Good 👍
No differential. Just two free wheels. Does it work properly?
Is even better than a differential, as a differential will send power to the wheel with least resistance, but this will ensure the power goes to the slowest wheel. So when a tyre starts slipping, power will go to the other tyre. You would need a limited slip diff to avoid this problem
Muito bom
How much are u selling these for
thanks 😊 u
Where to find?
What's the website?
www.pony4.bike/
Is this a velove armadillo @ 08:01?
Yes, it is ;)
👍
Can you order that rear axle separately
Please contact us via email to: info@pony4.bike Thank you
@@pony4bike I’ve mailed you :)