How To Replace Axle And Bearings On The Rear Wheel Hub With Freewheel
Вставка
- Опубліковано 11 тра 2021
- I made this video for subscriber request, in the video, I show you how to replace bearings and axle on a bike rear wheel. I use lithium-based grease. I hope this video will be helpful for you.
Check us on Facebook at / kabumbikelab
Don't forget to SUBSCRIBE and THANK YOU.
Link for removal tool (UK): ebay.us/pPTDOj
Link for removal tool(USA): ebay.us/s6NpQG
Link for chain whip (UK): ebay.us/vsj8oj
Link for chain whip (USA): ebay.us/xCm0Ap - Авто та транспорт
I was struggling to take old axel out and this video showed that the sprocket has to come off. Saved me big headaches brother Thanks for easy step by step process of your video..
This is a great video by the way. Before i watched it i tought the bearings went inside the hub. But now i know the cone was destroyed and push them in. I will sub.
Thank you for watching :D
This is how it's done---thorough, from the angles you need to see the tools and parts and the whole correctly, and in good lighting without shadow. Many thanks,
Svaka čast za video! Jbt ceo dan tražim detaljno objašnjenje, pošto nikad ovo nisam radio i konačno sve po PS-u 💪🏻😎
Drago mi je da vam je video pomogao 😁
thank you so much for this, I am currently renovating an old 90's bike I got for dirt cheap. Replacing the free wheel hub and axle was part of it and this saved me so much time!
man thank you! you have some sort of different accent but you still explained it good to me.
Perfect video for helping me carry out this job on an old Claude Butler Dutch bike. Thank you. 👍🏻
Thank you for watching :)
@@TheKabumcek how u clean it?
I like to keep the drive side axle assembly not broken down. I'm glad to see the freewheel came off easy.
Bardzo dziękuję - w końcu znalazłem porządny film o zdejmowaniu i konserwacji wolnobiegu.
Hvala za video i svaka cast, majstore!
Thank you I finally found the solution.
💚 Excellent. Exactly what I was looking for.
Great video. Thanks for the help 👍
Thank you for watching :)
Excellent video! Thank You!
Great video, this helped me a lot
Thank you for watching :D
One stupid question - best place to buy bearings?
@@blogerbobo bike shops, ebay.. you can find them in lot of places. Just be carefull with size of them
Best video on doing this. Thanks
Thanks for this video!
Thank you for watching :D
thank you sir it's very good explanation how to do it
Never use a torque wrench as a breaker bar you will damage the torque ratings of the wrench.
This wrench is just for this use :) Thank you for watching :D
good stuff man. Thank you
Thank you man :)
Absolutely fantastic. Thank you so much for the video. One question, I have removed all the screws without measuring the length as you did in the video. I now have a problem slotting the wheel in. Please help.
Thank you so much
Very good my friend
Thank you for watching :)
Thank you, tomorrow it's my turn
Thank you for watching, Let me know how it went :)
Nice socks, informative video
Thanks! ^^
How do I find out the length of my rear axle on my 21 speed mongoose XR-75 mountain bike if the rear axle broke into two pieces?
Use a ratchet handle or breaker bar or you will goose your torque wrench 👍
Hint, never use a torque wrench as a breaker bar if you wish it to stay accurate when torque bolts to proper specs.
Torque wrenches are for tightening only
5:47 DD-40
Why my axle is cracking again and again after few days????
Did you get it for Christmas ?
Can u makea video how to swap free wheel with freehub
Yes I can, but now I'm very busy, but as soon as possible I will make it :)
*_Cone wrench size?_*
Usually it's 14 or 15, but it can be 13 or 16 too
can i contact with you via mail? i have problem with my bike i mean i do not know in what order I should put the caps on the axle, I'll might to send you photos
Ok, you can send me photos, I will be able to look at it in 9 hours, becouse Im on work right now 😖 kabumcek@gmail.com
@@TheKabumcek ok thank you
Are you from balkan?
Jesam, Hrvatska
i admire the work but replacing the sprocket is as far as i go. once the bearing breaks just buy a new wheel.. $20
Gooö
76
Kids, never ever use a torque wrench as a breaker bar. These tools are calibrated an this can upset the calibration.
Don't measure the new axle just try the old nuts on it.
whats wrong with Audio
My man you sound like your whispering talk louder on these videos ,we can't hear you
Problem is your hands are all in it it’s like you’re wanting to teach us but you’re not letting us to see each step you’re just doing it