VESPA changing steering head bearing 🛵🔧 | TUTORIAL | SIP

If the scooter does not have any directional stability, or has a spongy road behaviour we recommend checking the upper and lower steering head bearings. It is easy to check the functionality with an unloaded front wheel. Simply jack up the scooter on the centre stand and move the steering shaft with the wheel control back and forth in the direction of travel. If the steering column shows clearance it is necessary to either retighten the upper nut or to replace the bearings. Checking the bearing shells is also recommended at the same time. We stock the individual bearings/balls as well as complete headset bearing sets.
Shoplink:
Steering Head Bearing Set for Vespa 50-125/PK and Sprint / PX / Cosa: shop.sip-scootershop.com/en/p...
Steering Head Bearing Set for Vespa VNA - VGLB: www.sip-scootershop.com/en/pr...
Steering Head Bearing Set for Vespa VN - GS150: www.sip-scootershop.com/en/pr...
Tools used in this Video:
Steering Head Bearing Nut SIP universal (BU5420): www.sip-scootershop.com/en/pr...
Mobile Scooter Hoist (15199000): www.sip-scootershop.com/en/pr...
Chuck SIP lower bearing shell upper steering column removal (20842000): www.sip-scootershop.com/en/pr...
Puller Tool SIP lower bearing shell of lower steering column (16561000): www.sip-scootershop.com/en/pr...
Chuck SIP lower bearing shell lower steering column removal installation (16029000): www.sip-scootershop.com/en/pr...
Tool SIP mounting upper / lower bearing shell, frame (21330000): www.sip-scootershop.com/en/pr...
Multi-Purpose Grease (14080000): www.sip-scootershop.com/en/pr...
Did you enjoy this video? Please leave a like, subscribe and share this Video. Visit our webshop www.sip-scootershop.com Any Questions? We are happy to help you in the comment-section below!

[@KK-TO]

Amazing how informative this video is without a single spoken word!

[@Denscaff82]

Best video I’ve ever seen! 👍🏻

[@afiqghafor8166]

very effective

[@ReVurbished]

Der Lenker muss nicht komplett demontiert werden, nur Bremsseil vorne und Tachowelle müssen aus dem Lenkrohr ragen. Den Lenker kann man nach hinten wegklappen und das Steuerrohr ausbauen

[@rocktrung]

For Px please 😍

[@george5590]

i have a bad vibration when i apply the front brake shudder. i do do think it's the, disk or pads advice please.

[@ClassicVespaWorkshop]

Alle Kabel weiß im Scheinwerfer :-) da hilft ein Foto auch nicht 👍😎

[@nileshkalbhor5094]

I didt see grease no