So nice to see that auto tool head working the way it should. The shaper is also looking much much better. You done a great job getting it straightened out and its been fun to follow along. Nice grind on the rougher tool. makes a difference when the tool enters the work progressively instead of all at once. From my experience thats where the issues are. Its not the heavy cut, the shaper has no trouble pushing off the metal. The problem is the abrupt enter and exit that spikes pressure. Great job as always Adam. Thumbs up
I know that a lot of the comments that you get relate to the actual machining job you are doing, but I would like to take this opportunity to commend you on the quality of the videos you are producing. The different camera angles and slow-mo etc. all make this a really entertaining channel. It is obvious that the amount of editing required to achieve this result is a testament to your attention to quality in all your work. Well Done!
That grind made a huge difference: Very smooth and no banging at all when entering the cut. Could definitely hear the shaper working when you had the full depth of cut in.
Your series on the G&E turned out to become one of my favorite ones on all UA-cam. I noticed I start to smile when I get notified you uploaded another video! All the Best Adrian
Not sure if you'll see this comment, but I have agreed to the purchase of a G&E 16" Tool Room Shaper, and I just finished watching the entire series. Like yours, mine has been sitting up for over a decade, and these videos have really helped me get a handle on what will be involved in the restoration. Also, I am not a machinist and have never operated a shaper. After seeing the first video, I knew what a shaper was. After seeing the second, I realized I wanted one, and this one came to me for a great deal.
I have watched from the time you unloaded the shaper and am excited to watch it's development. Your smile shows of great pleasure and I am very excited to see future development. Thanks for the video. Awaiting even more.
I'm not even a machinists but I can say this, I can watching your videos all day long. I get excited when you start a series and always look forward each and every episode!
Hi Andrew. Thanks for taking the time to set up the camera, take videos, and then edit them for us. Most people won’t realize how much time it adds to a job. I really enjoyed the clean up, and reassembly of this machine. During the cuts of the steel I noticed the knee looks to be nice and rigid, but the cross slide looks to be twisting on it's ways. A good view of the movement is at 19.00 minutes. It might adjust out with a small tighten on the gib. Thanks again. Regards Steve
Yay!!...i spoke to soon...here come the chips!!. they sound like 9mm casings hitting the deck. The thing i love most about following along with these teardown videos is once you put it back together i actually understand how the machine works and what it's doing....Thank you for sharing
Great work done. I am also use g & e shaper in Pakistan and learn shaper work from this man videos, again abom u done great work for learner or beginners.
Hi Adam, It really is a pleasure watching you bring that old girl back to life, she's like new in many ways. Congrats and I look forward to many of the projects you have planned ahead. Thank you, Craig
Thanks for all this man, it's been a great journey this morning on my one day off during "peak" season at Amazon where I work watching you run and then disassemble repair and refinish this magnificent machine. I love these shaper videos!
I soo love what you do. I look forward to the next video all the time. I have learned so much. I am 60, I am setting up my own workshop and you have inspired me. Thank You.
Wonderful job on the clean-up and rebuild. Feels good to see an old machine like this still going strong, in the hands of someone that will use it and look after it. Cheers!
The sheer force of that horizontal cut was remarkable. I don’t often get to appreciate the spectacular physical forces that these machines generate. It’s a beautiful thing! Thanks for yet another really great video!
Shaper is looking so nice Abom, nice job. Takes me back to high school where we learnt how to use a shaper in shop class. The bit grind makes sense, allows for soft entry and maximizes the cutting edge length which reduces the cutting load at any single point on the blade throughout the cut. Looking forward to seeing some finishing cuts!!
Abom79, I just watched an older video of you being called out by OxTools and you both challenged each other to indicate a part on a four jaw chuck. That was awesome, and of course you won. And the jack pot was pretty nice as well. I always am amazed how fast you are able to indicate parts. You make it look so easy and fluid. Nice going!
Nice vid Adam. When I was a high school teacher here in the UK on the late 70's and 80's we had a brand new workshop built and i had a horizontal milling machine and a I suppose 10 -14inch shaper and in the 10 years i was there I was the only person to use both machines!! No other staff or students went anywhere near them ever and I was gung -ho to have a go and basically taught myself to use them with my trusty Newns engineers reference book! Loved it. Adam that's a beast of a machine but boy oh boy you are taming that beast. Keep at it mate!
Adam the shaper looking great, and is making fantastic chips. I know this is not related to metal working but with summer coming on, to help keep your shop cooler, why don’t you mix up some of your machine cleaning solution and wash your shop door and then put one inch foam insulation on it and then sheet it with thin sheet of aluminum and pop rivet to the door. This should cut down the amount of heat that would penetrate the metal door and keep the shop cooler. Just a suggestion👍👍👍
I think I'd call that a SUCCESSFUL restoration! I have not used a Shaper since 1968 (High School Machine Shop) as they are sort of now obsolete. That said, I think you got a worn out war horse restored and able to perform well once again! Good job man!
You have sure done a great job refurbishing your shaper! I am amazed at how crystal clear your videos have become - very professional presentations. Thanks for taking time to share your talents with the world.
Adam, I appreciate your sharing all that you are learning about the shaper and the tool geometry. The shaper removes an gigantic amount of metal with each stroke. The power down feed is fantastic! That will be really handy with odd shaped pieces or with something big. Enjoy your week!
So much hard work put into restoring this machine. And it shows the result clearly. This is really nice to watch come together over the past month or so.
Absolutely fantastic Adam. Man that shaper is better than new now. Outstanding job you did on it. See people.....this is what happens when someone finds what truly likes in life. I admire your willing of perfection and your passion. Your videos should be used to teach students in the metalworking business.
Having owned a shaper for over 30 yrs.I have been able to make parts in the home shop that would be nearly impossible to do on a mill.Glad to see a new interest in such a versatile machine.
I'm far from an expert on machining but I think the new grind helped a lot. The slop seems a lot tighter from your modifications but there's still a bit of movement but maybe that's unavoidable. At any rate good luck and love seeing it making chips.
Cam at 4:36 reminds me of a beautiful woman's leg from the 40s, in stockings rocking back and forth.. pin up style, DAMN fine job Adam. I love the videos and the pride you show
Holy smokes...didn't realize it could hog dog so much metal...that new grind REALLY improves the chips...just rolls em up and drops em rather than popping em off and slinging em across the shop. Such a cool machine! Can't wait to see it do a real job where alot of material is removed! I'm not even a machinist...but love your videos man!
Aloha Adam, I'm not sure if I would ever use a shaper in my small shop, but it is much like my old mechanical teletype machine, "a mechanical marvel". I can sit and watch the movements of the machine and set back and relax and enjoy. I enjoyed the trip down memory lane, it is nice to see some of the machines of my era in use and appreciated. Comment, " you may need to start replacing your wardrobe it you keep slimming down. Mahalo Nui for your time in preparing the videos for us, at 78 yrs old I can look back and smile. I need some more travel videos too. Aloha ke Akua Chuck
I'm retired now, but your videos on using a shaper bring back memories of my days as an apprentice mechanical fitter. It was in a shipbuilding and repair yard in the U.K. The shaper was used a lot there, and I was shown how to use it, but since then as a marine engineer and various plant maintenance work throughout my working life, that was the only place that I did any work with a shaper.
Beautiful grind. Between the grind and the machine being tighter, there appears to be a noticeable improvement in the cuts. Little by little, she's starting to produce some nice chips. Nice watching the progress.
Hi Adam. When you were doing the heavy cutting you can see the table move back every time it made a cut. You may have some play in the table or the screw just like the down feed did until you fixed it. Excellent videos. Always watch your videos here in the uk. Thanks
Yeah I noticed that too. It looked the whole thing was shuddering when it cut. Put the fear of Adam in the block of metal . Those chips were just jumping off there.
Oh sweet bliss! Only one awake in the house on this sleepy Sunday, listening to the rain pitter patter outside the open window, whilst enjoying a cup of coffee and watching my favorite content creator. Thank you Adam!
That is a nice shaper, sure is nice to learn about tool grinds and stuff, nobody else has this type of detail that I have found week after week. Thank you for the great content!
That deep cut works very well with your new tool grind. You have an awesome machine and an awesome talent. The slow speed ripping sound is amazing. I think we tend to forget what those tools are doing to the work. Thanks again!
I agree with Dan Dobbs . This shaper is lucky to have you as its new owner. I could watch the old girl roll those big chips off in slow motion all day. You have got to love that power down feed. Now that I have my new room almost finished I plan on practicing with different tool grinds. And do some chip / tool grind comparisons . I want to do some dovetail/gib projects the way it was done in the old days . In other words a male and a female dovetail with adjustable gib . Maybe even a tapered gib like Bridgeport has on their x axis . The sky is the limit with one of these if you have a creative mind. Thanks Adam you done well selecting the shaper as a You Tube project.
Adam watching you watching the cuts on the shaper was like watching my kids on Christmas Morning. it was awesome to see that Huge abomb sized smile on your face... happy shaping brother!
It will be interesting to see how square that trams in and can cut in for a finish. It seems very good at hogging off large quantities of metal on odd shapes that mill might not be able to reach. My dad worked for Gould and Eberhardt around the time that shaper was made and that's where he met my mother. It's kinda weird to think he might have had a hand in building it.
Glad to see you smiling as speaking bout this tool. The cuts are looking better but as ya said. . .room for improvement. Hey, all takes time & practice. Nice job cleaning the shaper & power down mech.
Adam you look stoked with the running of the shaper ... nice job !!! It’s all been worth every minute of your time working on it ... it’s credit to you ...
I think for sure you better keep your shirt tail out cause if you get a big hot chip down in there you'd be doing the machine shop boogie. I am so glad for you and hope the machine continues to give years of service. Greg
I agree 100% better cut with all the work and improvements! Looks like it's doing what it is supposed to! Can't wait to see a finish pass on it. Keep it up man! Love your videos!
The power down feed works very well my Rockford Shaper has power up & down with the table. And I just used it for the first time . Keep the Shaper videos coming
Mine has power feed on the table as well. Might be ok with lighter cuts but it’s advised to keep all the tables clamps and outer support locked with making cuts.
Quite a transformation in both looks and functionality. Maybe you could reenact some of the shots from before, and make a before and after comparison. You are improving in your video making, and this could be a nice addition to your toolset. Is the tool grinding you describe in any of your books, or did you adjust your technique from conversation or comments? Thanks for breathing new life into an old machine, and bringing us along for the ride.
So nice to see that auto tool head working the way it should. The shaper is also looking much much better. You done a great job getting it straightened out and its been fun to follow along. Nice grind on the rougher tool. makes a difference when the tool enters the work progressively instead of all at once. From my experience thats where the issues are. Its not the heavy cut, the shaper has no trouble pushing off the metal. The problem is the abrupt enter and exit that spikes pressure. Great job as always Adam. Thumbs up
I know that a lot of the comments that you get relate to the actual machining job you are doing, but I would like to take this opportunity to commend you on the quality of the videos you are producing. The different camera angles and slow-mo etc. all make this a really entertaining channel. It is obvious that the amount of editing required to achieve this result is a testament to your attention to quality in all your work. Well Done!
Tony Newton, ABSOLUTELY.!.!.!.
That grind made a huge difference: Very smooth and no banging at all when entering the cut. Could definitely hear the shaper working when you had the full depth of cut in.
Your series on the G&E turned out to become one of my favorite ones on all UA-cam.
I noticed I start to smile when I get notified you uploaded another video!
All the Best
Adrian
Thanks Adrian!
It seems to be running better all the time! Its the little things that make the difference. :-)
Thanks for keeping the appreciation and technology of these old machines in the works....Dave
Thanks Dave, hope you continue tour videos as well. 👍🏻
It’s a kid with a new tool.
A very nice project with great results,WELL DONE!!!
Not sure if you'll see this comment, but I have agreed to the purchase of a G&E 16" Tool Room Shaper, and I just finished watching the entire series. Like yours, mine has been sitting up for over a decade, and these videos have really helped me get a handle on what will be involved in the restoration. Also, I am not a machinist and have never operated a shaper. After seeing the first video, I knew what a shaper was. After seeing the second, I realized I wanted one, and this one came to me for a great deal.
Mesmerizing. And the sound of those hot chips peeling off and hitting the vice like breaking glass. Poetry.
You must be so happy! Restoring and learning the machine you’ve always wanted. Looks like it’s working great. Congrats!
Nice grind Adam. The negative face giving a gradual loading of the tool looks like it works well.
ATB, Robin
I think it is great that you brought that fine old machine back to full functionality.
Thanks for showing.
Show more serious work in the future.
That *tink* sounds of the chips hitting the table is so satisfying.
I have watched from the time you unloaded the shaper and am excited to watch it's development. Your smile shows of great pleasure and I am very excited to see future development. Thanks for the video. Awaiting even more.
This is quickly becoming my favourite 'big' project of yours, Adam. A lot of passion has gone into this one. Thanks so much.
I'm not even a machinists but I can say this, I can watching your videos all day long. I get excited when you start a series and always look forward each and every episode!
Why do I find myself mesmerized by watching a tool peel off chunks of steel? At night I can watch the shaper for hours, it's very comforting
Hi Andrew. Thanks for taking the time to set up the camera, take videos, and then edit them for us. Most people won’t realize how much time it adds to a job. I really enjoyed the clean up, and reassembly of this machine. During the cuts of the steel I noticed the knee looks to be nice and rigid, but the cross slide looks to be twisting on it's ways. A good view of the movement is at 19.00 minutes. It might adjust out with a small tighten on the gib. Thanks again. Regards Steve
Yay!!...i spoke to soon...here come the chips!!. they sound like 9mm casings hitting the deck.
The thing i love most about following along with these teardown videos is once you put it back together i actually understand how the machine works and what it's doing....Thank you for sharing
Don't know about the rest of you guys,but I could watch that for hours.Massive force precisely applied.
Absolute pleasure to watch! And I have learned so much about an old technology; a machine that, six months ago, I didn't even know existed! Thank you!
You have every right to look pleased with yourself, Adam. Like all of the work I've seen from you, nothing short of perfection.
Great work done. I am also use g & e shaper in Pakistan and learn shaper work from this man videos, again abom u done great work for learner or beginners.
The metal pealing away ‘sound’ on the slow motion video is extra satisfying. Good work!
Hi Adam,
It really is a pleasure watching you bring that old girl back to life, she's like new in many ways.
Congrats and I look forward to many of the projects you have planned ahead.
Thank you,
Craig
happy for you the feed is working again, really appreciate the way you restored this old shaper back to its original state! keep on shapin man!
Man, I'd love to just spend a day playing with these machines.
That machine is sweet. Thanks for sharing this Adam
Thanks for all this man, it's been a great journey this morning on my one day off during "peak" season at Amazon where I work watching you run and then disassemble repair and refinish this magnificent machine. I love these shaper videos!
Great project really enjoyed this repair/reconditioning of your shaper. Can hardly wait for more shaper videos.
Thanks for all you do.
I soo love what you do. I look forward to the next video all the time. I have learned so much. I am 60, I am setting up my own workshop and you have inspired me. Thank You.
Wonderful job on the clean-up and rebuild. Feels good to see an old machine like this still going strong, in the hands of someone that will use it and look after it.
Cheers!
The sheer force of that horizontal cut was remarkable. I don’t often get to appreciate the spectacular physical forces that these machines generate. It’s a beautiful thing! Thanks for yet another really great video!
That sound is so satisfying
Shaper is looking so nice Abom, nice job. Takes me back to high school where we learnt how to use a shaper in shop class. The bit grind makes sense, allows for soft entry and maximizes the cutting edge length which reduces the cutting load at any single point on the blade throughout the cut. Looking forward to seeing some finishing cuts!!
Abom79, I just watched an older video of you being called out by OxTools and you both challenged each other to indicate a part on a four jaw chuck. That was awesome, and of course you won. And the jack pot was pretty nice as well. I always am amazed how fast you are able to indicate parts. You make it look so easy and fluid. Nice going!
That machine is obviously happy it found a new home and is working really nicely for you!
Nice vid Adam. When I was a high school teacher here in the UK on the late 70's and 80's we had a brand new workshop built and i had a horizontal milling machine and a I suppose 10 -14inch shaper and in the 10 years i was there I was the only person to use both machines!! No other staff or students went anywhere near them ever and I was gung -ho to have a go and basically taught myself to use them with my trusty Newns engineers reference book! Loved it. Adam that's a beast of a machine but boy oh boy you are taming that beast. Keep at it mate!
Man, that sound of shaper cut in slow-mo. So looking forward to the "best of shaper cut sound" soundtrack :D
Adam the shaper looking great, and is making fantastic chips. I know this is not related to metal working but with summer coming on, to help keep your shop cooler, why don’t you mix up some of your machine cleaning solution and wash your shop door and then put one inch foam insulation on it and then sheet it with thin sheet of aluminum and pop rivet to the door. This should cut down the amount of heat that would penetrate the metal door and keep the shop cooler. Just a suggestion👍👍👍
I think I'd call that a SUCCESSFUL restoration! I have not used a Shaper since 1968 (High School Machine Shop) as they are sort of now obsolete. That said, I think you got a worn out war horse restored and able to perform well once again! Good job man!
Love the sound on the slow mo. Well done
It's nice to see a guy that loves his work you take care man
As far as machining videos and machining sounds, the shaper is by far the most soothing.
That slo-mo action was awesome!!! I turned my playback speed down to .25 and it added just a little bit more awesomeness to it!!!!!!!!
Your refurbishment of this machine has been a joy to watch, it looks and works great!
Love the slo-mo sounds. Just amazing.
You have sure done a great job refurbishing your shaper! I am amazed at how crystal clear your videos have become - very professional presentations. Thanks for taking time to share your talents with the world.
Haven't used a shaper since "wood and metal shop" class in high school in 1968. Love the big B&G!
Adam, I appreciate your sharing all that you are learning about the shaper and the tool geometry. The shaper removes an gigantic amount of metal with each stroke. The power down feed is fantastic! That will be really handy with odd shaped pieces or with something big. Enjoy your week!
So much hard work put into restoring this machine. And it shows the result clearly. This is really nice to watch come together over the past month or so.
Absolutely fantastic Adam. Man that shaper is better than new now. Outstanding job you did on it. See people.....this is what happens when someone finds what truly likes in life. I admire your willing of perfection and your passion. Your videos should be used to teach students in the metalworking business.
Having owned a shaper for over 30 yrs.I have been able to make parts in the home shop that would be nearly impossible to do on a mill.Glad to see a new interest in such a versatile machine.
Beautiful big cuts. The machine looks good all cleaned up and taken care of.
Looking forward to seeing more of the potential from this machine.
Adam, that is one happy shaper. The burbling oiler shot said it all. Lucky was the day it crossed the threshold into your shop. Well done.
_Dan_
I'm far from an expert on machining but I think the new grind helped a lot. The slop seems a lot tighter from your modifications but there's still a bit of movement but maybe that's unavoidable. At any rate good luck and love seeing it making chips.
That slow-mo shot reminds me that I really want to see some high-speed footage of machining. Like reeeeeaaalllly slow motion and close up.
That shaper is looking and operating fabulous Adam!
Best shaper video yet. I'm amazed at how much better it looks.
Cam at 4:36 reminds me of a beautiful woman's leg from the 40s, in stockings rocking back and forth.. pin up style,
DAMN fine job Adam. I love the videos and the pride you show
Holy smokes...didn't realize it could hog dog so much metal...that new grind REALLY improves the chips...just rolls em up and drops em rather than popping em off and slinging em across the shop.
Such a cool machine! Can't wait to see it do a real job where alot of material is removed!
I'm not even a machinist...but love your videos man!
Thanks Adam...Absolutely outstanding conclusion to a fantastic series.
Aloha Adam, I'm not sure if I would ever use a shaper in my small shop, but it is much like my old mechanical teletype machine, "a mechanical marvel". I can sit and watch the movements of the machine and set back and relax and enjoy. I enjoyed the trip down memory lane, it is nice to see some of the machines of my era in use and appreciated. Comment, " you may need to start replacing your wardrobe it you keep slimming down. Mahalo Nui for your time in preparing the videos for us, at 78 yrs old I can look back and smile. I need some more travel videos too. Aloha ke Akua Chuck
I'm retired now, but your videos on using a shaper bring back memories of my days as an apprentice mechanical fitter. It was in a shipbuilding and repair yard in the U.K. The shaper was used a lot there, and I was shown how to use it, but since then as a marine engineer and various plant maintenance work throughout my working life, that was the only place that I did any work with a shaper.
Wow Adam good job! Thank you for showing the logic. No groaning at .75inches ,what a beast!!!!
You've infused your spirit into that magnificent old machine. Such a pleasure to watch your ongoing shaper adventures!
Love your videos Adam !! I've learned a lot watching you.. You inspire me to get out there and do my own thing.. thanks buddy keep up the good work
Love how the slo-mo emphasizes the sound.... Plink... ;-)
Beautiful grind. Between the grind and the machine being tighter, there appears to be a noticeable improvement in the cuts. Little by little, she's starting to produce some nice chips. Nice watching the progress.
Hi Adam. When you were doing the heavy cutting you can see the table move back every time it made a cut. You may have some play in the table or the screw just like the down feed did until you fixed it. Excellent videos. Always watch your videos here in the uk. Thanks
Yeah I noticed that too. It looked the whole thing was shuddering when it cut. Put the fear of Adam in the block of metal . Those chips were just jumping off there.
Oh sweet bliss! Only one awake in the house on this sleepy Sunday, listening to the rain pitter patter outside the open window, whilst enjoying a cup of coffee and watching my favorite content creator. Thank you Adam!
That is a nice shaper, sure is nice to learn about tool grinds and stuff, nobody else has this type of detail that I have found week after week. Thank you for the great content!
That deep cut works very well with your new tool grind. You have an awesome machine and an awesome talent. The slow speed ripping sound is amazing. I think we tend to forget what those tools are doing to the work. Thanks again!
I really liked those slow mo cuts. You now have one hell of a shaper.
+ 1 :D
I agree with Dan Dobbs . This shaper is lucky to have you as its new owner. I could watch the old girl roll those big chips off in slow motion all day. You have got to love that power down feed. Now that I have my new room almost finished I plan on practicing with different tool grinds. And do some chip / tool grind comparisons . I want to do some dovetail/gib projects the way it was done in the old days . In other words a male and a female dovetail with adjustable gib . Maybe even a tapered gib like Bridgeport has on their x axis . The sky is the limit with one of these if you have a creative mind. Thanks Adam you done well selecting the shaper as a You Tube project.
Adam watching you watching the cuts on the shaper was like watching my kids on Christmas Morning. it was awesome to see that Huge abomb sized smile on your face... happy shaping brother!
The slow-mo shots are just fabulous!
Outstanding job refurbishing the shaper!!!! Very impressive machine!
The machine is shining! Amazing job.
It will be interesting to see how square that trams in and can cut in for a finish. It seems very good at hogging off large quantities of metal on odd shapes that mill might not be able to reach. My dad worked for Gould and Eberhardt around the time that shaper was made and that's where he met my mother. It's kinda weird to think he might have had a hand in building it.
Wow that’s cool man! 👍🏻👍🏻
Glad to see you smiling as speaking bout this tool. The cuts are looking better but as ya said. . .room for improvement. Hey, all takes time & practice. Nice job cleaning the shaper & power down mech.
Adam you look stoked with the running of the shaper ... nice job !!! It’s all been worth every minute of your time working on it ... it’s credit to you ...
I think for sure you better keep your shirt tail out cause if you get a big hot chip down in there you'd be doing the machine shop boogie. I am so glad for you and hope the machine continues to give years of service. Greg
The old shaper is looking great. Once you get it all figured out and machining parts that will be a real good feeling. Keep it up Abom!!!!
The improvements are enormous, and it looks 100% nicer... like new!
I agree 100% better cut with all the work and improvements! Looks like it's doing what it is supposed to! Can't wait to see a finish pass on it. Keep it up man! Love your videos!
What a beast! Love the sound it makes when cutting
MUCH BETTER! Make that baby sing brother. I love it. 3/4 depth and the clapper hardly said a word. Nice!
I’m happy to finally get to see it run.
Ahhhhh! 2:46 I think I finally I get why the tool head and clapper box can both be independently rotated. Thanks Adam!
Nice work on this machine Adam. It was a pleasure watching the series.
Good Job adam your work paid off. Have a great weekend. God Bless!!!
Well done Adam! Thanks for the video.
I could just listen to that sound all day.
I love this video. Turning the shaper into performance art. Very well done Adam.
The power down feed works very well my Rockford Shaper has power up & down with the table. And I just used it for the first time . Keep the Shaper videos coming
Mine has power feed on the table as well. Might be ok with lighter cuts but it’s advised to keep all the tables clamps and outer support locked with making cuts.
Love to watch you work, you attention to detail is amazing. A wonderful machine well restored.
The G&E is looking just amazing Adam, thanks for another great video. :)
that unpainted down feed mechanism viewed from the front... it is just amazing... nice rebuild Adam :-)
Quite a transformation in both looks and functionality. Maybe you could reenact some of the shots from before, and make a before and after comparison. You are improving in your video making, and this could be a nice addition to your toolset. Is the tool grinding you describe in any of your books, or did you adjust your technique from conversation or comments? Thanks for breathing new life into an old machine, and bringing us along for the ride.