In RTSS, set up profiles for each game (the "Add" button) , rather than using the Global profile. This allows for individually calibrated limiter settings for each game you play.
@@Koozwad didn't even notice. i think the exclusion just sets application detection level to None. I just manually change it afterwards. Thanks for the heads up though.
@@FR33THYJust a theory I think the fact those new proprietary run on two rails causes more heat on the same gauge of wire . I opted to use the plug my gpu came with .4x rail to 600w .One would think better heat distribution and i have not felt any warmth on my plug after a gaming session on my ocd 4090 pulling almost full 600w .would you agree on that theory???I just don't want to melt .Only had this card a month lol.
When I select the benchmark the names for min, average and max fps only stay viable for a second. How can I get the names of the counters to remain forced onscreen during the benchmark like you have?
ua-cam.com/video/6zJlZFLo2-I/v-deo.html hope this helps for piece of mind mate. from new video "Alot of online games/game engines suffer from low 1% and 0.1%, even on good tuned hardware. Capping with rivatuner to a framerate you can maintain fixes this in some game engines. Other FPS capping methods do not fix the low 1% and 0.1%s. Here is a video for my viewer, some piece of mind that capping fps with rivatuner isn't the end of the world for a benefit of higher 1% lows. The test was done in a controlled environment with 100 click averages. NOW everyone keep in mind, do your own tests. I've provided a riva/msi afterburber config in the last video. Some game engines wont benefit from this. Some do. If you are still struggling from bad 1% lows tuning your ram timings and cpu can help quite alot. Just also note some game engines are just buggy and poorly optimized. Hope this helps."
Nice. I'd be interested in seeing an optimization guide for Cyberpunk RT Overdrive mode with DLSS 3 w/ frame generation. I have a TUF 4090 and 5800X3D and with DLSS Performance 4K + FG, 3 Ray 2 Bounce PT, I get avg 80fps, 60 lows. The issue is frequently stuttering and frame drops. The gpu usage is always high 90's but the FPS varies on the different areas of the map from 60 to 110 avg fps. This has to be CPU bottlenecking with crowd AI, but gpu load is always around 99%. Foliage actually has a big hit as well, go to the city center jungle to see that.
@@d4nith3 No, they were bought separately. The 5800X3D is the best cpu for my motherboard and I saw no urgent rush to get a new MB just to get a newer cpu that is only marginally better for gaming. The price I paid for for the 4090 was actually a lot more, as I got it it day 1, and I have no regrets. The 5800X3D is a very good CPU for gaming
Can anyone help. I have both configs, I hit Alt F7 but I don't get the additional detail on FPS that Fr33thy has on screen? This is the key to setting an FPS cap and minimizing 1% low impact.
only issue can be if some games can trigger crash while using msi and ive seen instances of bans issued casue of that :( otherwsie TOP CLASS as normal!
Always check with your game policy especially multiplayer PvP, some game could banned you, because of using MSI + Riva overlay and in some game, the overlay can't appear at all. Thanks Fr33thy.
I’m not saying you’re wrong, but I’ve never heard of a game banning you for using a utility to monitor your hardware. A reshader or other application that alters how a game appears, yes. But this just monitors how your hardware is performing. Afterburner is supplied with your GPU and other manufacturers have similar software
It does say in rtss that the hook may be picked up as cheat software. I had trouble with it recently nut I’m wondering if it’s because it’s not updated anymore and I’m on win11?
because it gives 5-7% more fps with an overclock good example mw2 4k some high settings instead of 240fps its 260 with an overclock its free performance?
i personally wouldn't trade off the gpu's lifespan in exchange of going from 240 (which is already an absurd number for me who's broke as hell and have low standards) to 260 but to each their own@@FR33THY
Can anyone help. I have both configs, I hit Alt F7 to benchmark I don't get the additional detail on FPS that Fr33thy has on screen? This is the key to setting an FPS cap and minimizing 1% low impact.
I'm pretty sure I had the same issue and figured it out: To add the 0.1% FPS and 1% FPS stats on the RTS overlay, you must enable it through Afterburner burner under the monitor tab. Scroll through the list and click the check next to the "Framerate 1% Low" and "Framerate 0.1% Low," then click apply. After I did that it popped up for me when I started the benchmark with alt f7. Hope this helps!
if you want the config, use this now
github.com/FR33THYFR33THY/Ultimate-Windows-Optimization-Guide/blob/main/4%20Installers/3%20MSI%20Afterburner.ps1
You’re the only guy I trust with these things! Appreciate your videos brotha!
In RTSS, set up profiles for each game (the "Add" button) , rather than using the Global profile. This allows for individually calibrated limiter settings for each game you play.
Also hold Shift when clicking add. It will display currently running 3d applications.
@@IXFINGERZXI Holding shift adds exclusions. Holding ctrl adds profiles. You can mouse over the Add button for that info.
@@Koozwad didn't even notice. i think the exclusion just sets application detection level to None. I just manually change it afterwards. Thanks for the heads up though.
heyyyyy thanks for this video, great content !!
u have any oc or undervolt videos? or what video u recommend see.
Fr33thy is the guy your girlfriend tells you not to worry about
Cringe
keep em coming chris 🔥
YOU ARE THE MAN. I DONT KNOW WHAT TO SAY MAN. I LOVE YOU SO MUCH.
+1700 on the mem .That is a juicy overclock. I haven't attempted to go that far on my 4090 Tuf series.What card do you have a strix ??
gigabite oc
i got lucky with this card for sure
@@FR33THYJust a theory I think the fact those new proprietary run on two rails causes more heat on the same gauge of wire . I opted to use the plug my gpu came with .4x rail to 600w .One would think better heat distribution and i have not felt any warmth on my plug after a gaming session on my ocd 4090 pulling almost full 600w .would you agree on that theory???I just don't want to melt .Only had this card a month lol.
@@FR33THYThis is how you kill the card in less than 3 years with a total unnecessary OC.
this is gold
great video !!!!! @ 6:20 what video does this relate to?
saving your benchmark results to a txt doc
@FR33THY
Did you know afterburner has a UI scaling setting?
Would be handy for the video, cause now everything is so tiny and hard to read.
you really are a legend man, appreciate your hard work ❤, and btw could you please tell me your display scalling percentage?
That Video helped me so much❤️. Can you use G-sync with it or does it make the 1% and 0.1% Low drop?
gsync is fine
@@FR33THY TY So Much
@@FR33THY could you also use vsync with the gsync? in nvcp
Using AMD Freesync throws my 0.1% out the window don't use it!!
The google drive link for the config file is broken. 404 Error. Can you post new working links?
When I select the benchmark the names for min, average and max fps only stay viable for a second. How can I get the names of the counters to remain forced onscreen during the benchmark like you have?
thank's FR33THY
you need to do a definitive measure of just how much input latency is added by capping via riva tuner- imo the results are not conclusive
ua-cam.com/video/6zJlZFLo2-I/v-deo.html
hope this helps for piece of mind mate.
from new video
"Alot of online games/game engines suffer from low 1% and 0.1%, even on good tuned hardware.
Capping with rivatuner to a framerate you can maintain fixes this in some game engines.
Other FPS capping methods do not fix the low 1% and 0.1%s.
Here is a video for my viewer, some piece of mind that capping fps with rivatuner isn't the end of the world for a benefit of higher 1% lows.
The test was done in a controlled environment with 100 click averages.
NOW everyone keep in mind, do your own tests. I've provided a riva/msi afterburber config in the last video. Some game engines wont benefit from this. Some do.
If you are still struggling from bad 1% lows tuning your ram timings and cpu can help quite alot. Just also note some game engines are just buggy and poorly optimized.
Hope this helps."
@@FR33THY w
@@FR33THY Source engine probably not profiting off this?
@@wallC_main i have almost no input delay, its worth it for the 1% lows
average 20 kb/sec MSIAfterburner downloading. here we go!
is it necessary to download it from guru3d?
They usually have the latest version
Hey Fr33thy, was wondering if you have took off your optimisation pack from Google drive? There's nothing in the folder anymore
sadly google flagged it, im trying to sort it out
@FR33THY ah damn, hoping you can, that pack was a godsend for me fixed so many issues. Best of luck with it
@@FR33THY zip it in password locked files
why dont u make separate profiles for each game?
Nice. I'd be interested in seeing an optimization guide for Cyberpunk RT Overdrive mode with DLSS 3 w/ frame generation. I have a TUF 4090 and 5800X3D and with DLSS Performance 4K + FG, 3 Ray 2 Bounce PT, I get avg 80fps, 60 lows.
The issue is frequently stuttering and frame drops. The gpu usage is always high 90's but the FPS varies on the different areas of the map from 60 to 110 avg fps. This has to be CPU bottlenecking with crowd AI, but gpu load is always around 99%. Foliage actually has a big hit as well, go to the city center jungle to see that.
You bought an 1100$ GPU with a 280$ CPU??? Wait what?
@@d4nith3 No, they were bought separately. The 5800X3D is the best cpu for my motherboard and I saw no urgent rush to get a new MB just to get a newer cpu that is only marginally better for gaming.
The price I paid for for the 4090 was actually a lot more, as I got it it day 1, and I have no regrets. The 5800X3D is a very good CPU for gaming
are these links going to be updated?
Can anyone help. I have both configs, I hit Alt F7 but I don't get the additional detail on FPS that Fr33thy has on screen? This is the key to setting an FPS cap and minimizing 1% low impact.
Can you please make a video on how we can use Rivatuner + afterburner on Battlefield 2042 after season 6 which blocks with anti cheat the overlays?
what if you have gsync, vsync in nvcp and capped fps in game?
Thank you soo much
Ty 🙏
🔥🔥🔥🔥🔥
Any Nvidia gpu driver recommendation?
I'm getting an error message 'Failed to initialize display driver wrapper' since copying configs over to msi afterburner
For me somewhy rivatunner is not caping fps :\
for gtx 1650 recommendations? core clock value e others?
depends on factory clock of card
most under load (with overclock can do 2000-2100mhz) depending on lottery
When I install msi afterburner does it come enabled with some oc/ different config? I just want to monitor stats not change settings.
Link is not work your config link
POGG
links are no longer available :_(
Thanks for the video. I copied your config and put the cpu threads in the right order. But it doesn´t show me the gpu.
bugger you might need to check those on
Some games are lame lately. like mw2 will crash and give you error reports " Your GPU is Overclocked"
i got this too. you found solution?
can i still overclock on a laptop? i7 10870 with a 3070
Why TF would you want 300 fps?
Any rtx 4080 recomendatio s ?
anyone know why it shows 0.0 watts on GPU power? and how to fix it?
i do the same as a video tell and my call of duty keep crash :c any help please?
how to make it run silently at startup?
I have asus tuf gaming laptop can i have add this config
so it doesnt seem to work when i click the link.
only issue can be if some games can trigger crash while using msi and ive seen instances of bans issued casue of that :( otherwsie TOP CLASS as normal!
What games? We need the receipts, otherwise this is justa bunch of BS
Always check with your game policy especially multiplayer PvP, some game could banned you, because of using MSI + Riva overlay and in some game, the overlay can't appear at all. Thanks Fr33thy.
I’m not saying you’re wrong, but I’ve never heard of a game banning you for using a utility to monitor your hardware. A reshader or other application that alters how a game appears, yes. But this just monitors how your hardware is performing. Afterburner is supplied with your GPU and other manufacturers have similar software
It does say in rtss that the hook may be picked up as cheat software. I had trouble with it recently nut I’m wondering if it’s because it’s not updated anymore and I’m on win11?
Rivatuner is kinda bloatware no?
No not even a little. Been using it for almost a decade.
can i have msi afterburner and rivature and palit thurnedmaster aswell for rgb only and how to set msi afterburner for prefered app
first
Why would you overclock the RTX4090? The GPU is the best on the planet right now! No need to OC unless you want to reduce the lifespan of the GPU!
because it gives 5-7% more fps with an overclock
good example mw2 4k some high settings
instead of 240fps its 260 with an overclock
its free performance?
@@FR33THY Useless OC for the best GPU at the moment, you reducing the lifespan of the card. GG
@@d4nith3 negative the card will be sold to probably 3 other owner's before it dies
i personally wouldn't trade off the gpu's lifespan in exchange of going from 240 (which is already an absurd number for me who's broke as hell and have low standards) to 260 but to each their own@@FR33THY
1ST
nope
this MSI Afterburner have virus :) and take dates from ur pc :)
oh nooooo, not my dates!
@@FR33THY maybe you are lucker ?
☕️
Can anyone help. I have both configs, I hit Alt F7 to benchmark I don't get the additional detail on FPS that Fr33thy has on screen? This is the key to setting an FPS cap and minimizing 1% low impact.
@@angelnst nope, no solution yet. Pretty much gave up. Would be nice to get a response
@fr33thy
I'm pretty sure I had the same issue and figured it out:
To add the 0.1% FPS and 1% FPS stats on the RTS overlay, you must enable it through Afterburner burner under the monitor tab. Scroll through the list and click the check next to the "Framerate 1% Low" and "Framerate 0.1% Low," then click apply. After I did that it popped up for me when I started the benchmark with alt f7. Hope this helps!
@@acebandge5293 thanks for taking the time to respond mate. Unfortunately I’d done this already…bizarre.
6 months late but you have to enable benchmark mode in rivatuner :)