How to Install Low Profile LED Turn Signals on Your Harley Davidson
Вставка
- Опубліковано 4 вер 2024
- here is what i would say is more of an impression / review video for these turn signals i purchased for my motorcycle.
Pros
Lifetime warranty.
Company sends instructions with detailed about what wires to connect to.
paint finish looks to be good and shouldn't flake off.
Plenty of wire included for multiple applications and good gauge wire.
Cons
exposed electrical inside a non sealed housing will probably corrode.
LED is only held in with a Allen screw and potentially will fall out of housing.
Lights do not fit flush with controllers in my application for a good presentation.
Turn signals purchased from EAGLE LIGHTS website.
www.eaglelight...
rear turn signals and headlight purchased on amazon
www.amazon.com...
www.amazon.com...
I will post any updates I have in here so you are able to check back if curious if any problems arise that you might want to know about
PLEASE GIVE A LIKE and consider subscribing to more content to come
Damn! I originally bough these cuz I love the look of them. But once I got them, I just got pretty intimidated with all the electrical stuff it entailed. 🤦🏼♀️ so I ended up getting the bullet ones that were very straightforward to install. I wish I had seen this video before I returned them
You could always get them again. I like how minimalist they look on the bars gers rid of some of the cluder. I'm still using them to this day and they work great.
The turn signals i bought are made by Kodlin.
That's odd one is flush and the other isn't. Thinking about this type of signal for my Breakout.
Think it was designed based on a hydraulic clutch lever housing and wouldn't doubt if it sits flush on that side in that case.
I have these on my breakout -2018. They look perfect and fit better than the video. There is a LOT of the install missing. I ran mine thru my bars with a string. I do not have hyper flash on the lights but do on the dash lights. I have the rear tiny lights too and soldered in a diode. love them!
What happened to the wire connection part? Any Updates?
Still working perfect only thing i have changed since is i relocated the wires to inside my bars to clean things up a bit. looking at the lights themselves I'm not noticing any corrosion inside the housing but if it does go bad i will be hitting eagle lights up on their lifetime warranty.
Too small for my taste. On a side note, what's the fairing? Thinking about adding one to my Iron 883.
It is a Memphis shade road warrior they should have one that will fit the iron 883
@@alaskagarage Thanks
They are brighter than stock lights and that's what only matters.
Nice vid
Thank you
Who makes the rear taillight?
MOVOTOR Led Tail Light LED Brake Turn Signal Rear Light Low Profile Smoked Taillights Compatible with Harley Davidson Dyna Sportster 883 1200 Road King a.co/d/7N1LeFJ
It is on Amazon it's very cheap in comparison to others it works good and i haven't had any problems with it
Nice! I ordered the Eagle Lights Fat Bob tail light.
Too many things about the fit and finish for me considering they are expensive from that company. They should have figured all that out.
I very much agree.
@@alaskagarage Love the bike by the way. I have a 2015 dyna WG. What is that unit above the speedo? GPS?
@I don't know thank you. That is the power vision I used a tech mount that they make that bolts direct to the power vision and tapped a bolt into the top of the riser to add the tech ball to.
@@alaskagarage You have a great bike there. Be safe and watch out for Polar Bears.
@I don't know thank you. You to. Them polar bares keep to themselves it's the moose that like to jump out onto the road. :)
not recomended my fatbob fuck up the signal control
only problem I had was it created hyperflash but with the corrector that the company also sells it corrected that and haven't had any issues.