Car Parking Brake Stuck? Too Loose? How to Diagnose Handbrake Yourself!
Вставка
- Опубліковано 8 лип 2024
- 1aau.to/h/ckQ/
If you are experiencing any problems with your parking brakes, from loose engagement, to sticky brakes, you can check out the handbrake, or emergency brake, system, by following the advice in this video. Len explains the common failure points in secondary brake systems, and where to look if you are having problems with yours if it is sticking, hard to engage, too easy to pull, or not releasing.
Check out this playlist for more great diagnostic videos!
• Driveway Diagnostics!
For More Info visit us at 1aau.to/h/ckQ/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
My e brake on my 2014 suburban won't release is their a manual release I can't see on the other side ?
My e-brake got stuck the other day but I did manage to get it unstuck. Then I drove to the store and back and it drove fine (no lag), plus when I did need to break normally (using the pedal) that was fine, too. By 'fine' I mean no lag, no issues. I did not use the parking brake again; I have always engaged my parking brake out of habit. But now I'm not sure if it's safe to drive or if I'm over-reacting. Should I take it to the garage? The last thing I need is an unnecessary service bill. The car (a 2008 Ford Focus) IS old so it may be rusted. I just want to know if I should have it towed to the station or if it even needs fixing at all as long as I don't use the parking brake anymore. ??
This guy has to get into acting he’s very good with mannerisms
Lol yea it’s interesting
Rear wheels were locked tight after leaving car with e-break on. I had tried at night more than once to get it to budge but no luck. Watched your video and it was informative enough that I felt extra confident it was just locked up from age/rust so went out to give it one more try. It was late afternoon, warm and sunny, I thought that may help change the dynamic. I rocked it several times, pumped breaks, and "boom" the wheels unlocked and it slowly got back to normal, though it will needs some tlc from my mechanic when he is back from vacation. Thanks, Your content helped motivate me!
This was an absolutely amazing rundown. Well done. Thank you
Been 2 years man and your vid still so helpful thank you ❤
I needed this video as I'm having e-brake issues. Thank you, A1A.
I used my e brake last night, i can drive reverse easily after but when i drive forward I can hear screeching sound going 20km/hr and feel vibration when I go above 60km/hr then it would disappear but when I let go of the gas my car slows down quickly. Just wondering if my e brake is still being locked in or touching my rotors.
Merry Christmas guys! I really do appreciate all these videos
+Cody Dietrich Thanks for watching!
Very conscise explanation and thorough ! Awesome job buddy !!!
Question: Inspections are due this month. My e-brake handle is super loose since November (Boston Winter), so I took it to the mechanic, then he showed the attachment to the 4-wheel disk (4.03 min) - those large springs were not moving. He said needs a to change the rare calipers and the job is about $600. After watching the video, I feel calipers are not need to be replaced. Any advice?
Thanks for the informational video-super helpful.
Concise information. I now understand the problem why the handbrake cable stuck for one of the rear wheels. Thank you.
Thank you very much, very informative, though I feel a lot of underwater stones in that job, it looks very complicated to me (but I'm very new amateur (though a fanatic one), and for more advanced people most likely it won't look so). I've learned a lot from this film, just love this channel.
+Olena Erhardt Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts.
Awesome breakdown! Thank you!
Great video and very informative.
Had a recent issue on 2013 Nissan with shift lock. Noticed Parking brake not working also. Would the shift lock be a reason this happening
Thanks for this quick and in depth video! I'm currently having an issue with my 1993 mazda Miata. The emergency brake seems fine using It, but it's been happening quite often when the car sits for at least an hour or two, I go to start driving and the wheel feels like I'm being held back, until after about a 2-300 meters of driving I hear a small "pop" from one of the rear tires and then the car releases and starts driving like normal. So after seeing this video its leading me to believe that it's now due to the ebrake
+P.TSO Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Excellent presentation!!
Excellent information
Thanks. Never thought about the e brake cables being stretched.
Mine works great has about 6 clicks but when I drop it down it has like a 7mm freeplay where it’s engaging the light but not actually clicking yet and if i drop it a lot of the time it ends up staying up by that little tiny bit so I have to man handle it :/ why Is that
Thank you sir , nice job!
Great video brother thank you god bless you
Whole explanation done well
question chief:
i just replaced my parking brake pads.
i can only get 3 clicks up, and handle
‘won’t click-up no more. also, I feel more tension after 3 clicks up.
should I ‘spread the pads more, or loosen it up?
please advise, thanks man.
Good video. Great info
Thank you, great video
first information video of E-break or hand break in details on UA-cam I found after years here 😘 should make how to fix it as well 👍🏻 .. Thanks
+Azz P Thanks for the feedback!
Thank you so much for this video متشکرم از شما
Thanks very helpful.
Thanks for the information Len..
+Mahmoud Al Shawi Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Thanks for the video. I have a 2019 ram ecodiesel and the brake gets stuck occasionally. I have to drive a few ft to disengage. Then the passenger rear brake squeaks...
Mine just broke don’t know how I lifted it up one day fine when I came back to drive the car again released it and now it dosnt stay up there pressure on the cables I can feel it but it’s not holding
well explained.. thanks
EXpecially useful! :D
Great explanation of how the PB system works, visually and verbally, however you did address the issue of the PB not working but not the issue of what to do if it is stuck on ( where the vehicle won't move) which is my situation but thanks for a good video that A. didn't have the music up so loud that you couldn't hear the guy talk .... B. a camera that wasn't hand held by the guy doing the work .... C. filmed in the dark with one swinging 60W light bulb .....
Really wanna appreciate your good work and bring a lot of understanding to how these things work on cars. Would really like an answer to a 2008 Rav 4 where the e-brake with lever pulled to the fullest the car still won't hold. The brakes shoes have been changed and adjustment between the front seats done but still no positive result..thanks
So this is what's going on with my truck right now I can't get it to release so the spring must be damaged or weak because when I drive in reverse it will stop and feel like I hit something then I'll put it in drive then back in reverse and it will go but when I was out driving it will make a lot of noise sometime. But my question ❓❓ Is it okay to keep driving my truck like this or will it damage it❓
Good video on the brakes very informative. Ha you dont want to pull those brakes on too hard though or you will loose the top off that truck. You will need a dust pan and a brush to clean the rust up.
+John Blackburn Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I had a rear wheel wine was doing my head in then in remember doing the brakes and removed the brake disk drum to inspect but when you remove it the parking brake boot gets loosened so putting it all back together and the parking brake had no tension at all. Had to jack the car up and tighten Noise is gone. All is well for now
When releasing my parking brake it only returns half way (not forcefully like new) then i pull it up with my toes whilst pulling the lever. Small bumps in the road will depress it a click or 2 down.
In my case I was sitting in traffic. And pulled up on the ebrake handle. Now in this car it's always a little tight, but doable, but needs to be pulled up all the way to ensure a total stop.
I pulled up on it, needed a little bit more, and then something snapped! The handle went loose and I lost all ebrake power. Now the handle bounces around and doesn't go all the way down.
When I press the brake I hear a noise coming from an old spring , might it be the cable with the spring the issue ?
Hi i forgot my e brake on when it got - 10C / 14F and I couldn't move my car when I released the e brake. I maybe drove like 40 meters because I tought it was bc of the ice. Now the e brake is loose and the ABS stays on. Did I do any damage? Bc i cant afford to pay alot. I have a fiesta tdi from 2005
What was it! This happened to me!!
@@notchamomma4073 same happened to me this morning in UK -4°c. I put it down to the breaks freezing up. Was fine after 6 mins of driving but the car couldn't get upto speed for 6 mins and my ABS light is on too. I've took the handbrake off and popped it into gear while it's parked up. I looked this up and it's nomal, could be the handbrake cables housing isn't air tight and is letting moisture incauseing it to freeze in cold conditions.
After releasing my ebrake, it appeared to be stuck. I gave the gas pedal a bit of a press then I heard a snapping sound at the right-rear wheel. I think I might have damaged my ebrake.
Thank You.
This video is really truly great and it helped me but DANGGGG THAT CAR IS RUSTTY
Good observation
Welcome to the rust belt side of the automotive life
Hello i have a ford fusion it beeps and beeps when i take off it says the parking brake is on but its not the emergency brake lever doesnt click but my car holds a little bit what is my problem
10 degrees F here, went to drive my subaru forester 2010. warmed up car for about 10 minutes. released ebrake, started to drive off and noticed the break light was still on. did seem like car was not accelerating normally. drove it super slow to store about a mile away and back at about 20 miles an hour. didn't notice any burning smell, just didn't want to go fast. can you tell me what might be the problem? could it be something to do with the cold? did I damage my car by driving it? I wonder why the manual ebrake is acting normal, like is mentioned in the video, but it was driving like it was on as well as the light was on. arg. help please! do i need to take it in? I guess i should stop driving it for now. thanks!
Why is my e break light still on after using my e break? Durango drives good just the e break light stays on and keep notifying me.
When I let my brake down and go to back up or drive forward I’m there’s this snap sound I here it’s small but it wasn’t there before
Rust!!! I’m glad I live in Dallas TX no rust!
"Yeah, but I'm sayin', that TruCoat - you don't get it, you get oxidation problems. It'll cost you a heck of a lot more'n 500 dollars!"
Whoa, it's like they know what's wrong with my truck, same model as in the video. Two weeks ago I tried my parking brake but they froze in the applied position and I had to hammer them back. Even though when they were on I was still rolling backwards lol. Think I stretched the cable a bit too.
+weatherman 001 Thanks for checking us out! If you are still having issues rolling backwards it is definitely worth checking more into that cable. 1aau.to/m/Shop-1AAuto-c
What if the thread is broken somewhere? may be at the handbreak leaver?
So. There is a noise coming from both of my back wheels. I thought it was the hub it so I was about to buy two. The other day I parked on a steep incline, I usually put my parking brake on before I put the car on park. On this occasion the car just ran back. Is that the brake or something else?
+omarnumbawan We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Thanks Mannn... 👍
+graham connolly Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Mine is rusty and crusty. E-brake doing nothing on a manual car. Just took it to the dealership. Will see how many $$$ Wish I saw this video earlier, could have done some tests myself. I like that it is in the back , less weight
With my car when I have it in neutral when I put the handbrake down it is still stiff and doesn’t feel like it’s in neutral
I have a toyota camry 2002 v.6 3.0 and when I pull on the manual brake it won't actually step. I would appreciate if you actually showed one video on actually fixing one of those problems.
My emergency brake won't release the handle that I pull in my Mercedes-Benz comes right out and my parking break light is on when I go to drive it also feels like it's dragging also when I go to hit the accelerator too fast I can feel while I'm in the vehicle the back where my wheels are skipping or something like my parking break is trying to catch It what do I do anyone knows I need my vehicle to take my daughter to school and home and we live far outta town
Why does the emergency brake alarm sound saying that the e - brake is on. And the hand e- brake does not go all the down and makes alarm buzz saying e - brake is ingaged. 2009 Lincoln 4 cedan
+henri benavidez We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Buen ECHO HERMANO UR AWESOME. 2005 Ford Fusión SE 4 DOOR SEDAN Hand Break recently Slammed down did not Lock or gripe and Light Has indicated Brake on when Its Loose. It stayed on Once or Twice But Eventually it Gets Loose once again. Heeeeeelp. Por favor Muchas Gracias,CIAO
I bagged up with my E brake on and now when I drive a ride sometime do you know what it is
It rubs do you know what it is
I need help 1a auto!!! I need to learn how to adjust a 1999 oldsmobile alero parking brake with disc brakes in the rear. Help!!!!
+chris We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
Can you guys do common problems for 1998 ford f-150
+Tristin Mccann We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
E brake isn't working anymore, something is loose or broken. Thanks for the video!
I took my car to get the brakes replaced (front brakes) and they adjusted the rear ones, but now the hand brake is too hard to pull and it doesn’t go up as it used to. It drives normal.
Because of you I see this 1a Auto
+Jorge Rodriguez Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Question. My handbrake lever doesn't ratchet or lock in the up position. Any thoughts? Thanks.
I'm assuming it's either not connected or needs to be readjusted. Maybe you figured it out by now but I figured it's helpful
My old car parking break is just completely stuck when will not go back, I’m screwed
Thank you for that, great video! On another note, I’m not your friend 😡 stop calling me that
Had a retainer pin rust and break on drum brakes on a 98 Silverado. Chipped the shoe linings. Replaced shoes and hardware. Bled brakes as I also installed a new wheel cylinder. Backed up and hit the brakes several times to get self adjusters to engage the brakes better.
Pedal was low and spongy. Ebrake was not engaging properly. Thought my Ebrake cable may have been stretched from when the drum brakes fell apart and maybe I needed to have the brakes bled at a shop with the computer to trigger the antilock bleeding process.
Turned out the self adjusters didn't work. Removed the drums and manually adjusted the shoes. Ebrake works fine now and the regular brakes now have a much firmer and higher pedal.
+Google User Thanks for the feedback!
I pull the e brake, and it moves fine. However, the car doesn't brake at all.
Love how Americans call it an emergency brake, yet if you pulled it going over 30 your car would flip...
Emergency brake? Is it the same as a hand brake
I thought you guys did one on e brakes already !
+Ichiban Noodles Thanks for checking us out! We have many videos for many different vehicles, this is just an overview of some common issues that would be caused by a faulty brake rather than a vehicle specific repair video. 1aauto.com
my hand brake doesnt lock in, i pull it up and it shoots right back down
Beautiful video but my rear brakes are disc brakes not drum brakes, now what?
Beautiful ???
flamboyant car guys will always deliver you the best information in the friendliest way
Have two new handbrake cables installed hoping to fix the problem but its the same. The right cable stays slack and doesn’t retract. Right calliper still springs back fine. Pulling the hair off my head.
If it only holding one side
Make one for a manual transmission
+lilplaya We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
Forget that break cable you might want to focus on those giant rust holes.
+Ben Lent Thanks for the tip!
When you live in the rust belt, wouldn't make a difference to repair rust holes. When the rust get bad to the point of safety being compromised, time for a new vehicle.
I accidentally pulled it too hard what to do?
It's stuck now
Any luck? Mine is stuck too 😫
Dynamite
That's one rot box that truck
My emergency brake get stuck when i leave the car for 3 days without driving and i just stopped using it.
Wow, those dodge trucks are garbage to begin with, now add rust to the equation..
This is an acting show where i cannot even pause this clip?
amd tgis is not the only such video which is thrust upon
us?
Bro moving zesty ash
Rusty AF
+David T Thanks for the feedback!
bnbnbn
Emergency brake? What a stupid name for the handbrake.
totally annoying speech and body gestures. 20 seconds max
Dude my e brake was so tightly on and I couldn’t get it to come down. I even flagged down a neighbor to help and she just did it with ease I’m like some kinda mega stupid oh my lord