BMW 330i 325i E46 Oil Filter Housing Gasket Change DIY
Вставка
- Опубліковано 27 чер 2024
- Update on Mar 13, 2015:
I've been made aware that I didn't have to drain all the oil out of my engine during this video. I could have just slowly opened the oil filter cap to let air in and the oil would have drained back into the oil pan. Makes sense to me because the oil filter housing attaches about midway up the engine. So give that a try when you do this job--makes for one less thing to do!
-----------------------------------
Step by step on how to change the oil filter housing gasket on a 2002 BMW 330i E46 Sedan. I cover everything in great detail and leave nothing out. This video applies to all E46 cars from 1998-2006.
The oil filter housing gasket BMW part number is:
11421719855
You can find the fan removal tools here:
amzn.to/2j4dHMW - Авто та транспорт
2023: been watching for 8 yrs.?! Yes. Have had my 46er for 6 years or so. This is a great channel for resources in the future. This is the first shot I've seen someone put the clutch fan in. Bravo. Please keep going with the e46's. They are so helpful to the next group who has low milage cars. All this will be our turn next. Thank you for the hundreds of hours you have dedicated to this. I so appreciate it.
ATTENTION VIEWERS: He got super, SUPER lucky with his gasket coming out easily with a pick. You will most likely NOT be so lucky. These are usually so hardened that they will require some heavy digging and picking to get them out, and yours will most likely break into 20 pieces. That being said, I recommend you take the extra step of removing the power steering pump off the bottom of the filter housing BEFORE you take the housing bolts out. It's super simple and only adds a few minutes to the job, but will make removing that brittle gasket SO much easier. It also has the added benefit of allowing you to properly clean the housing. No power steering hoses need to be removed to do this.
My guess is, his car has had that gasket replaced before as they almost NEVER come out that easily.
Not necessary got mine out easy
@@startingtech3900Yes, if yours has been replaced at some point in the cars history it will come out easily. Most have not.
Thanks for the reply all I wanted to know is if I had to disconnect PS lines so thank you 🙏🏻
I finally felt ready to tackle this job that I have neglected for so long. One thing I loved about your videos is that you covered everything in detail to include the necessary tools you need for this. I finished in about 5 hours, mostly because I kept getting side-tracked, and now I get to wait until tomorrow to check for leaks. Thank you so much for taking the time to make these videos, I have learned so much from them, keep them coming!
And I thought the Bavarian auto videos were good. THIS IS fantastic, I believe I can handle this job now! You were spot on in describing how much is left out in DIY videos. You are very thorough I thank you so very much ! I felt like an apprentice today.
Charles Henderson Glad you're ready to give it a go now!
50sKid
This seems like a bigger pain in the butt than most repairs you've shown here....I guess it will help a little that I'll have other things out of the way already as I intend to do several things in one go. Thanks!
I agree, Jason’s BMW videos would be the most detailed that is available.
Just want you to know you are a stud! If I'm doing a job on my car I pretty much exclusively use your videos. The big scary jobs aren't that big and scary when I can just follow your videos. Really appreciate all the time you take to document the proper procedure, you have helped me keep my favorite car running strong.
So after watching this video about 15 times I was able to tackle this job today..took a total of about 4 hrs and a lot of that was cleaning all the oil that had gunked up on the engine..this video helped so much.
Mine is a bit easier, I have an electric fan so taking it out is a breeze( no special tools).
Thanx brother u saved me chunk of change
Joel Garcia Excellent, glad it helped you out!
Hey bud, after doing this task everything was going great till this morning.. All of a sudden my turn signals, steering wheel controls and climate control are going crazy all on their own... Do u think anything in this task could have cause this?
I disconnected the neg on battery before I started project.. I am going crazy with this. I just got home from work so I'm gonna plug my obd reader to see if I can find something but if you have any advice I'd greatly appreciate it
Joel Garcia Check your battery voltage. In my experience when that starts to drop things go wonky.
Exactly what one of the guys on the BMW forum just told me..thanx for your response, will update tomorrow. I have a load tester at work.
4h as well but lost 1h to raise my lowered car on ramps ☺️
Just completed this. Took 5 1/2 hours but included the oil change and cleanup of leaked oil too. Only issues were the AC tensioner bolt, stripped it but found a new one , and replacing the fan shroud and fan. Thank you for taking the time out of your schedule (aka: life) to help others! Next project is never before replaced thermostat and waterpump. Mileage is about 87,000.
Literally cursing and swearing trying to get the alternator back in and came across this video. The alternator top tip!!!!! Jason you’re a lifesaver!
There were at least 3 other videos on replacing this gasket. Yours was by far the most accurate, to the point and helpful. Your explanation of the positioning sleeve on the lower alternator bolt dispelled the fears and frustrations of other videos. Thanks for this great video.
And Patient Zero...don't be a woose. It just takes time & patients. I'm 68 years old & if I can do it I'm sure you can ;-)))
One of the better DIY videos out there; nicely done! Easy to follow, great visibility, and appreciate the time you took in putting this together. Looking forward to your future videos, as well. Great work!
Jason , I’ve never needed to do this until now and of coarse you never let me down ! A perfect step by step guide best one out there
Studied your video a few times and just today I finally got it done (about 3.5 hrs). You Sir, are an Angel!
Thank You.
Truly thank you for this video. I could not find this oil leak to save my life. I had no idea BMW had a gasket here. I'm tackling this tomorrow and I know for sure my leak will finally be done.
Thank you so much for providing us with this very helpful step by step video... will be doing my housing gasket tomorrow 11/5/16 thanks again!
Excellent as always. This helped me go the deepest I have ever been in car repairs - thank you. I was very worried with the leaking until I discovered your video. I also had a leak and managed to replace the Vanos oil line, couple of pulleys and belts while down below. I was new to servicing a BMW and very grateful to learn from a true expert.
Just completed this DIY based on your video; it was spot on and very informative! Made doing the job very easy (so much so, I felt like I must have forgot something because it went so smoothly)! Thanks for the video, helped me diagnose the common oil leak and fix in no time.
Great tip on how to remove the alternator, a lot of DIY videos out there does not really show all the steps in detail and these are the once that make the job tougher trying to figure out how to remove
the parts. Your videos has helped me a lot on my DIYs. Thanks!
That’s why your vids are the best. You don’t talk about what you did, you show what you’re doing and why. Thank you!
I bet this is the most clear video about OFHG replacement! Thank you!
I love your videos. You make it possible for me to maintain my car. I love you!
+venerated Thank you so much, glad you find them helpful.
Just replaced the oil filter housing gasket on my 2001 325i. Put everything back together; it starts and idles fine but if I step on the gas pedal quickly it cuts out (1 second delay) then revs up. Didn't do it before the repair. I disconnected the back part of the hose (the front part of the hose leads to the vanos). Could it be that or something else?
The vanos shouldnt cause a problem like that. Did you disconnect and part of the CCV? Also did you make sure and plug the MAF back in? Are there any engine codes?
I KNOW EH.... ME TOO !
I DON'T UNDERSTAND WHY HE DOESN'T HAVE A SHITLOAD OF SUBSCRIBERS
High quality video, and clear on every step. Thanks for this common repair which is applicable to entire E46 sedan, wagon, coupe, convertible. The gasket is few dollars in USD, but more costlier in other part of the world. Anyway, it is a must for any old BMW, or anyone who want to keep their engine bay and floor clean
This video was extremely helpful! I just replaced this gasket on my 1999 bmw 528i and followed your directions in the video and it worked perfectly!
Thank you so much for being thorough in making your video. I'm going to my garage now to replace my gasket with confidence!
Thank you for the excellent video of the R/R of the oil filter housing gasket that was a life saver for me. I can honestly say that I considered myself a decent mechanic but needed help with this project. Well done, and thanks again.
Thanks Jason, this was my first repair.... now I can pull the fan, air box, upper intake boot, cabin filter box, rear heat shield, and dista intake thingy, ha, ha, ha, in under ten minutes.... only because of your videos, thank you! Steve
I watch a lot of these videos (Thanks BMW...), and this one was exceptionally clear, concise, useful, and nicely shot. Thanks for sharing it.
Love your step by step videos man. Keep them coming. You are a champ
Thanks 50sKid - perfect video with very detailed steps from stat to finish. Others videos like you said were really incomplete and bad quality. Yours are the best. Finally my front oil leak has been tackled. Great project for holiday season. After I completed the intake manifold and belt replacement again following your other videos, this one was quite easy(around 2-3 hours). Thanks again and I wish you 1M views for your all your videos in 2022!!
By far the best OFHG change video out there! Thank you!
I will also be tackling this job shortly. Amazing job on all your videos that I have watched so far. Thanks
The 50s kid BMW videos are the best on the internet/youtube. I have used them on many diy projects for my BMW and found them to be exact roadmaps to the job. Thank You..
Your videos should be a standard option on every used BMW.
Indispensable!
Thanks again for another excellent video.
Just replaced the housing gasket following your video. Absolutely correct it was a Pita to remove the old gasket. It came out in about 20 pieces! The alternator removal was particularly helpful with tapping the bolt - thanks.
Great video man. Including your vanos rebuild, this is another solid step by step video that’s helped me keep my E46 running properly. I spent the most time taking the gasket out, mine was baked onto the housing. Now I just need to get the bottom bolt back onto the altenator which is a PITA.
I just want to give you a big thank you, great video detail and everything I change my on a 2002 330xi, great job and thank you.
E46Fanatics!
I'll be doing this along with the oil level sensor when I change my oil next weekend.
You really are incredible as to how educated you are on any BMW. You should teach.
Thanks to you I️ have save tons of money. Doing the work my self.
God bless you Jason.!
Watched your video before performing this repair on my 325, it was really helpful, no more oil under the car! Thanks!
it has been 4 years since i owned e46 325i and i started watching your video. it has been great.
i did this job myself thanks to u sir , u specified all the tools needed and gave a COMPLETE walk through , also cherry on top is that i couldn't take out my fan with the provided "special" tool so i watched a video on how to take them out a different way and it was yours as well , THANK YOU🙏
One telltale sign to look for with OFHG leakage is oil pooling on the waffle-like pattern on top of the engine block on the driver's side. It can easily be seen by removing the airbox. Since there's alot of pressure in the OFH, these leaks can leak pretty profusely.
Just rewatched this video Jason, my 2001 330Ci is leaving me little presents on the garage floor. Looks like my job for the weekend !!! Cheers again buddy.
Thank you for actually showing the steps. Great videos. I also liked the one where you fixed the shifter ball housing thing.
Your videos are so amazing, just like you said so many other people just record and say "i just did this and that" while they never show any of what they have done. For an absolute amateur like myself ive managed to tackle many jobs on my E46 and saved thousands thanks to your step by step videos!
Thanks for the video. I just used it to great success to change my gasket. your vids are some of the best for guys like me. Thank you!
Thank you so much for making this video I definitely subscribed. This went from a DIY job that I thought may be beyond my mechanical capabilities to a job I am sure I can now easily handle and will be using your video as a reference as I go along. I appreciate this work.
Great how to mate.
Ive started to use your videos more and more as I like the way you explain the little things you come across.
I done this job today, though I will add, I didn't want to drain the oil so parked the car where I was going to work on it the night before so when I stripped the housing off all oil was drained into the sump anyway.
Great work fella!
Just did this today, watched this vid before the job to make sure I had all new washers n shit that I'd need, watched it again whilst doing the job, you're my Yoda man n I love ya more than you know for all ya Vids on the E46, by far the best BMW maintenance and trouble shooting channel on UA-cam 👌
Didnt know if i could manage this by myself. But this is clearly a really good video! Please keep going on doing all this pieces of Gold. Thanks and greets from Germany
I just did the DIY on my 04 E46 ZHP and 'cause of this video it was a breeze.....thanx kidd.
Hey there 50’s kid . Never have I done a commmet , however you’ve totally earned it . To somebody who has never own a car or work on a car you made me feel that I could do it by following your steps and wow I did had a little clicking noise when I was done but that was cause I left one oil hose that connects to ccv line from the engine and after hooking that up everything was fine an went on to getting the car to temperature and all is well thank you soo much an thanks for the recent video I just loved the feeling on saving a lot of money . Thanks again from Las Vegas
SO glad you took the trouble to give all the details. Thanks a ton !
Great job, I wish everyone did their videos like you. I have a 2001 BMW 330ci Coupe, and I've been learning the hard way. I love the car and I'm try to keep it..Thx for the detailed videos..
I was told new BMWs are more difficult to work on, but it looks to me like the new models have the pump more accessible. This video showed me how to do some other things at the same time. Planning to get a BMW after graduation next year, and I will not be giving
Stealership all my money. Thank you for the videos.
This bmw is over 20 years old. What are you talking about buddy. 15 years at the time of your post
@@ve2430 Which raises the question: why are YOU here? How did you end up watching this video and reading the comments too?
Doing this next week on my E60 530i. 257k miles. Runs like a top. Just likes to make a oily mess 🤣
Thanks for this. Another job I'll tackle while doing the valve cover. Thanks for keeping all these vids 100.
Great job very detailed. Just did my housing gasket on a 04 325i and your video made for a excelent point of reference.
Thanks !
Great video! I wish all DIY videos on UA-cam were like that. Great job!!
I was told by E46 Owners Club to check your videos. I started to do this job already before watching this video. While I did some extra steps and ommited other, I got the housing out. Need a thorough cleaning, because previous job had the gasket and RTV silicone sealant.
This jib was to change the gasket and oil pressure switch, but I happened to stumble on a coolant leak above the housing. So another thing to get fixed.
Thank you for this video. I'm sure to see your other videos. My 325i does need some TLC. I'm sure they will help me get it in top shape.
Glad you film everything. Great video. Own a 2002 330ci convertible and your videos are the best.
Good video. Very in depth and without annoying backing music.
Who tf would downvote this video Mercedes owners? 😂 Great learning tool, thanks for sharing!! One of my upcoming projects including valve cover.
Best step by step and best camera angles.... hands down
Thanks or the all the videos! The most helpful helpful tips for me were #1 lower alternator bolt sleeve to be tapped back #2 Disconnect the upper Vanos oil line bolt instead #3 I didn't drain my oil. My gasket was so bad I had to pull it out (disconnect PS pump bolts ) from the car and slowly pry the gasket out in pieces. I had a great time working on it with my son. Thanks for all the instructions.
Great video, I replaced the oil filter housing gasket today. I did not have to drain the oil. I changed it recently so I gave it a try and it worked out fine. The dealer wanted $400. I changed it for the $5. Thanks!
thank you, this is the best OFHG video by far.
Your tutorials are just plain awesome. Anytime I need to do something on my car I just look for your videos.
One of these times when you take off the fan you should just bite the bullet and do the electric fan conversion. No idea why they did all the fan clutch crap for the auto.
Excellent video... love the fact that you went step by step and didn't leave (much) out. I think there was only two steps that were excluded and you explained or used onscreen comments to cover them. I have only two additions I would include... the first is the crush washers for the Vanos... they are crush washers. They are a single use item. ALWAYS replace them. The only other addition is the belts and oil. I would have opted to replace them as-well since you were already in there... belts are really inexpensive, so seems a no-brainer... oil for an e53 (my vehicle) is nearly a bill, so I may have foregone that, but would still have considered it.
Short of my critique, it is a GREAT video. I love what you are doing with this series, so keep it up!
Great video! Successfully performed the repair without draining the oil pan.
Thank you sure you are a gentleman and a scholar! I found the leak just your explanation on how to made life so much easier. Keep wrenching brotha stay safe
Sweet video. I'm doing this bugger of a gasket and a cooling refresh this weekend. This helps so much! Thanks!
Thanks for showing step by step and mentioning torque parameters, great job!
I cannot thank you enough !!!! Another excellent tutorial !!!!
A job ''for pro's with tons of specialty tools" dismantled & explained to very basics that can be accomplished by DIY-s. You are my HERO, especially when I was quoted over $1900 by independent shop with over 27 years of experience in BMW & Mercedes ONLY to change my power steering hoses. FCP euro got complete refresh kit + tool to remove pressure hoses for about $300,,,, BUT, the catch was the freaking mechanic showed me transmission hoses going to the small cooler at the front all dripping in oil- he pointed them to me as power steering hoses. After watching your Power Steering video I realized the drip came from the top where the $30 return hose is attach to the container. Did not even replaced it, just cut off about 1/2'' of the hose put new clamp and problem solved. That mechanic deserves new Shop Banner :
" 27 years of Successfully RIPPING OFF BMW & Mercedes Owners"
THANK YOU AGAIN !!!!!
If YOU are ever in South Florida let me know--- You have a nice Dinner on me !!!!!
I'm learning very important information from you. Thank you very much for sharing this information. Please do not stop sharing this information with us. I'm following you.
You dear sir are a gift to us e46 owners. Started working on my e46 estate myself. It's a high mileage (225k) my 2000 320i (M54 engine) estate. she's always been manintained to spec. She's geting tired but she still looks good (from a distance) and still drives and sounds like she's supposed to. So I figured, the only way to keep her on the road for a couple more years is if I start doing the work myself. Had my mechainic do a lot of work to her last year and the year before so I was expecting to have a smooth entrance into BMW maintenance. I put her on Jack stands, removed the cover and oil everywhere! So after succesfully fighting the urge to put her up for sale I regain control and found you! (first found the iCP video where you're looking at a man doing stuff without seeing what he's doing, their other vids are good though, also own a Volvo S60 and I've rebuild the entire supsension on that with the help of their vids) Your video about common BMW problems was a trip down memory lane because I remember my mechanic had already told me all about them, in the past ten years, usualy just before he gave me the number... Thanks to you I was able to diagnose the problem correctly and fixed it within a couple of hours. Had my phone with this vid on the intake manifold! You do a fantastic job, been watching a lot of your vids and they give me the courage to keep going, because the oil pan seems to be next.... Thanks!
Hey 50s kid, your videos are excellently detailed. This video was real useful when I changed the gasket on my car. Keep up with the good work!
+the101musicchannel Will do!
This is the best video on this job out there. Thanks so much for the detail. I will be doing this job real soon.
hnkfsh81 Just finished this job today. Your video made it a long but easy job. My gasket was basically petrified. Thanks so much!
I like the the way you didn't leave that old mess! Good job.
I'm about to do this to my '04 330i (but with an electric cooling fan). These engine bays are a lot more packed than the trucks I'm used to, but this doesn't really look too bad after watching you do it. I know this video will come in handy for future repairs also - lots of good info here. Thanks for taking the time to make the video!
It's not so bad once you remove a few things. Good luck!
It’s not hard
I went straight to removing belts a/c h2o,ps strg pumps wo removing fan shroud and fan. Took off idler and adj pulleys and alternator went out with ease. Loosen banjo ftg from vanos and I managed to slide off the old gasket. Washed off oil and dirt as seen here. Took my time in reinstalling the rest. Btw drain only half of the oil and reused. Very helpful and my hats off to you. I was going nuts for a week trying to locate that massive oil seepage. Thank You Very Much!!!!
Interesting approach--must have been cramped working with the fan still in there!
You are very professional and your attention to detail is remarkable. Thank you so much for sharing. I am looking at just shy of $1,000 to have BMW do this for me. Totally helped me out.
Thank you!
+Jim McKay WOW that's the first time i've heard what dealer would charge for this job. You can pay just shy of $1000, or you can do the work yourself and pay about $3.27 in parts.
Thank you Alex!! You save me couple hundreds and giving me a confidence to talk to the mechanic and know how many hours it take to fix it.
+phamwoody13 Nice
Thank you for the time you spending putting all ur effort into making these videos.
I haven'd done it yet but I suspect this video will have saved me a ton of time and money. I thought I had a more serious oil leak but this seems to be exactly what the issue is. Love all your videos I've watched so far. They are excellent!
Did the job and this video was spot on for most of it. I can't thank you enough especially for some of the torque values putting it back together. Hopefully this will fix my never ending oil leak.
I did have a small bit of confusion around the tensioner pulley for both belts so mentioning for others in the future. Mine is nothing like what you have but I have a 2005 325xi so perhaps they did something different with it? The bottom tensioner doesn't have a bolt/head to lock onto but is a torx/star head that I needed to use. The worst one was main belt and tensioner. There was nothing but a hex bolt on the pulley itself that I had to use an allen wrench to pull down since I didn't have a head head socket/adapter. It was quite difficult and has a mini-shock attached behind the pully vs a spring (not sure what is on others). I had to puzzle it out a bit.
Finally just mentioning that your video says the housing "pivots" out and I expected only that and didn't realize that the entire side with pulleys and all would literally fall off and isn't attached to anything after those 6 bolts come out. I had a bit of a panic when that happened but otherwise was fine.
Anyway, Kudos to you for excellent videos. Some of the best I've seen for any type of auto repair.
You make this look so easy! Simple steps to follow and added tips! 👍
one of the better DIY videos out there.
Your videos are great!! I have a bunch of them saved. You are the e46 god!! So glad I found your channel👍👍🤟🤟
Hey 50sKid - I want to thank you for posting this. It was so helpful in fixing my leak. I changed the OH Gasket and the Vanos line coming off the housing. Total cost: $125 (approx $2500 quoted by Irvine BMW.) At first I was worried it didn't work. When I got it all back together, I still got oil drips for a few days. It turns out it was residual oil. Now my garage floor is dry again! Thanks, man.
$2500 is criminal. This is $600 by most stealerships.
@@PathosRx What? Here in Canada the BMW dealer wanted about $800 for both, still expensive. I just got a new VANOS line made for $22 and a gasket and did it on my dads BMW 325. It has just 103,000kms and all gaskets were leaking.
Wow, thank you so much. This video has made a very difficult diagnosis and solution very easy. You have saved me lots of $ by doing this myself. Lots of gratitude, keep up the great work.
I've watched many of your videos and saved many thousands of dollars.
Thank goodness you’re around doing this for us.
thanks for the video man!!!! cleaned my engine bay this weekend and I've been making spot for awhile now!!!!! looks like that waffle spot on the engine and my PS lines are full of oil!!! time for it!!! thanks mAN!
Another 50sKid video that saves me $500 and hours in my garage. Thanks!
I noticed in the few videos I've seen so far, they're not profanity-laced, which is what I'm used to hearing when my dad, who had his own auto repair shop for 30 years specializing in German cars, would do when working on bimmers. LOL. Unless you've edited out all the profanities/frustrating moments. Thanks for making such comprehensive videos that even a layman like me can understand!
Your how-to videos are EXCELLENT!! Thank you for sharing
The best e46 diy on the web
thank you so much for taking the time to make such a thorough, we'll thought out and very helpful video
Im about to start a project car. 2003 bmw 325i. It has 240k miles on it.
I need to replace repair quite a few things and i just wanted to say your channel is very helpful. Thank you.
I love your videos! Very detailed and the camera work is on point. Glad I came across your videos :)
Just what I needed. Going to do this job this weekend.
Thanks!
Thank you for this step by step! Keep them coming...