Charlie’s going to be a beast! Good luck on the maiden run!!!!!! My bad I thought you guys were rebuilding, my stupid butt didn’t look at the date! He is a beast!
I absolutely love the 1 and 5/8 chromolly 6 point roll bar in my 1970 442 build by Steve Grebeck. He promised me id be back for a halo and A pillar tubes. Then he died an early death down in Florida, cant remember the year. Think i want kentucky boys from tin soldiers to finish the bars.
I love watching these young guys build cars at a high level, build their lives, and show us how they do it. Brad is a humble dude but he is an industry leader. Can’t wait to see how CB does after the build.
We had a Milwaukee 8 in grinder and used a worn cutoff disc on it. Without a guard. But when used it I wore welding gloves or thick leather gloves and also a welding leather jacket and piece of aluminum under it to protect my chest as best I could. Used it to cut roofs off a car when we built dirt track race cars to put in a cage. Also used it to slice firewalls to modify for engine placement to limits as well as clearance to work on. Cutoff wheel was thinner cut than most other wheels .
I want to say to Jason Man to Man that was an awsome speach u gave at yella belly about Cali Nate and u are on point with everything u said so awsome speech and is all about family and fun so thx Buddy took it to heart man.
LoL the makers mark t shirt definitely says "kentucky"....the Commonwealth. I live in Detroit but my home is in the mountains... Letcher county. My biggest fear is moving my shop down home and having to fight with and deal with copperhead snakes in the shop
I’m not that guy that goes around grabbing tires, belts, and plugs from big name racers/cars, but you all definitely should have thrown pieces of Charlie in every order after the weight loss.
@@TinSoldierRacecars I’ve always welded mine with a mirror. Too much work to remove roof panel. Worked on several cars with nice cages that were done by other people that weren’t welded 100%…
I'm a newer subscriber and I'm wondering where and how the guys at Tin Soldiers became such talented fabricators at a young age. Most guys take decades to reach your ability with chassis design and parts creativity.
Ole Charlie done went full on jenny craig & HIT THE GYM! Cant wait to see some test hits soon!!! Awesome as usual and Brads its tacked already content had me lmao🤣
If we were scaling the car business up we would invest in a nicer chassis table. Just a lot other tools we would rather have. And we are not interested in building many cars. This old table has built some sweet stuff though threw the years.
This comment is for Rick: Dude, ever since you come on board the content has went to another level! I really enjoy the little tweaks and the memes and the “Rick Commentary” you bring to the videos. Your value is unmeasurable! Keep it up dog! 🫡
Brad’s tip about drilling the relieve holes when installing the cage was top notch.
yea , its a no brainer until I forget about every time lol...great to be reminded
Daaaaang look at the size of those headers😳😎 goes with saying “go big or go home” 😂can’t wait to see ol’ Charlie fly !!!
Jason droppen those Dimes !! Nice looken welds !!!
I can watch you all weld and fab all day!! What you all do really isn't fab work that's art fellas!!!
Wishing you safe travels and good luck in Texas.
Ole Charlie is getting ready 👀
Man charlie is looking great wow thats some 1st class work.
Thanks 👍
The camera man is one of the boys it awesome he talks to the guys i like it Charlie Brown has come a long way 👍🏻
Can’t wait car looking very serious 🫡😮💨
Dude love the Charlie updates!!
That thing lookin good 👍
Thank you!
Yall got the White Camaro lookin good Boy's 😎🤘
nice ride the cage sweet nice job
Top Notch
Charlie’s going to be a beast! Good luck on the maiden run!!!!!! My bad I thought you guys were rebuilding, my stupid butt didn’t look at the date! He is a beast!
Can't wait to see how much these improvements do for your weight. Old Charlie will be flying.
Badass workmanship‼️😃🤙🤙🤙 Aloha from Texas
Charlie is looking good
Charlie lookin awesome
I really enjoyed this type of video very educational and great work guys
I see Mark poured you a nice comfortable set...Nice
Charlie looking good 🇺🇸🇺🇸🏁🏁
You guys do great work real good welds love the videos
Thank you!
Keep the videos coming out
We need a new series "Ricky builds a rollcage".
A motivational Monday wouldn't hurt my feelings either.
We can make both of those happen!
Incredible work. It must be awesome working with your friends, doing the things you love. What a life. Those welds are 👌
It really is!
charlie lookin good boys!
Killing it guys!
Great job guys. You make it look easy. Stay safe
👍🏼
You guys are great thanks for the video.
Thanks for watching!
Another great video! Can’t wait to check out Charlie at the track!
Stoked to see you out this summer man!
I absolutely love the 1 and 5/8 chromolly 6 point roll bar in my 1970 442 build by Steve Grebeck. He promised me id be back for a halo and A pillar tubes. Then he died an early death down in Florida, cant remember the year.
Think i want kentucky boys from tin soldiers to finish the bars.
You guys rock thanks for videos
Thanks for watching!
Dang Charlie is just so sick, The Fab Work is mind blowing! Awesome Job!
Thanks 🤘
Car is turning out badass 💪
Great work guys 💪💪👍
You know you bust your butt att your shop when you got a teeter hang up! I got one at mine. My buddy has one at his!🤣🤣
Thank you! 😁
Always whit the good work and clean weld, it looking crispy 👌 👏
Thanks 👍
Looking Badass.... Everyone go racing get some fun going
Charlie!!!
Great content. I learn something new with almost every video you guys post.
Great to hear!
Outstanding...
Good job bro
Thanks
You’re welcome
Charlie lookin good 💪💪
Looking nice. Love the look of those welds....
Thanks 👍
Looking great guys!
Thanks!!
The raddest shop car ever !!
Would love to see a clip of you guys explaining how you weld the hard to reach spots!!
Noted!
Awwesome work
Thank you!
I love watching these young guys build cars at a high level, build their lives, and show us how they do it. Brad is a humble dude but he is an industry leader. Can’t wait to see how CB does after the build.
Local Legend has Brad known as "Big Brain Brad"😉
We had a Milwaukee 8 in grinder and used a worn cutoff disc on it. Without a guard. But when used it I wore welding gloves or thick leather gloves and also a welding leather jacket and piece of aluminum under it to protect my chest as best I could. Used it to cut roofs off a car when we built dirt track race cars to put in a cage. Also used it to slice firewalls to modify for engine placement to limits as well as clearance to work on. Cutoff wheel was thinner cut than most other wheels .
Jason Brad Great as always Godbless you both
I want to say to Jason Man to Man that was an awsome speach u gave at yella belly about Cali Nate and u are on point with everything u said so awsome speech and is all about family and fun so thx Buddy took it to heart man.
Love me an offset notch
LoL the makers mark t shirt definitely says "kentucky"....the Commonwealth.
I live in Detroit but my home is in the mountains... Letcher county. My biggest fear is moving my shop down home and having to fight with and deal with copperhead snakes in the shop
Great content, awesome video segment! 🔥
Appreciate it!
I will see ya at small tire gangsters tomorrow
Charlie lookin mint👌
Looks the nuts!!
I’m not that guy that goes around grabbing tires, belts, and plugs from big name racers/cars, but you all definitely should have thrown pieces of Charlie in every order after the weight loss.
I want to see you weld roof on!
That will be included in an update video once we get there!
@@TinSoldierRacecars I’ve always welded mine with a mirror. Too much work to remove roof panel. Worked on several cars with nice cages that were done by other people that weren’t welded 100%…
nice work soldier boyz...n20 ttf in 2024
🤘
I'm a newer subscriber and I'm wondering where and how the guys at Tin Soldiers became such talented fabricators at a young age. Most guys take decades to reach your ability with chassis design and parts creativity.
Ole Charlie done went full on jenny craig & HIT THE GYM! Cant wait to see some test hits soon!!! Awesome as usual and Brads its tacked already content had me lmao🤣
Nice update!
Thanks!
Yaassss🤜🏼🤛🏼💨
Ole "Blockhead" looking really nice! Y'all take care.
Thank you!
Love that car😍
rick is my favorite person ever
“Don’t bring me in to this shit” 😂😂😂😂
You guys really need a milter bros tubing notcher .
can yall possibly make a video about the chassis table on building one and how yall set a car up on it
Lets gooooo!!!!
#TSR👍👍👍👍👍
😎cheers from🇨🇦
Where's them Gold Welds at???
Ready for dat 959
16:38 the gold ones isn’t on order! 😅
I know it may be a bit early to have an answer but overall what weight savings are you expexting? Charlie is looking pretty LEAN INDEED!
If you don't mind me asking what is the usual measurement between the first tubes you were putting in
Remember to add bean bags before capping hahahha
Keep up the interaction way better and in the podcast
Todd I want your Nova that thing is sweet
What laser did you get? I wanna install it 😅
What’s the story on the green Buick on the hoist?
LQQkin amazing guys!
🔦 🏁💰 🤑 💸 🇺🇸
You know CJRC makes some bad ass frame table jigs 🤷🏼♂️
If we were scaling the car business up we would invest in a nicer chassis table. Just a lot other tools we would rather have. And we are not interested in building many cars. This old table has built some sweet stuff though threw the years.
@@TinSoldierRacecars makes sense, I forgot you guys are pushing more toward part production correct?
@@mjboy8790So is CJRC, that's why you don't see them building a lot of Car's it seems there is more money in Parts
@@TinSoldierRacecars So your saying "Classic" No wait "LEGENDARY"!!🤪
what amps do you run to solder with the silicon bronze?
Cb is gonna be sooooo fuckin gansta fellas. Nitrous to the front
💪😎
Billy's car done yet?😊
This comment is for Rick:
Dude, ever since you come on board the content has went to another level! I really enjoy the little tweaks and the memes and the “Rick Commentary” you bring to the videos. Your value is unmeasurable! Keep it up dog! 🫡
I really appreciate it man!
Geez Chuck! Looking little slim there! You lost weight? 😂
Good grief CB is GANSTA 😎
Just curious, what does a chassis for a 7.50 or 7.0 Fox body mustang run?
6 figures plus
Whens the next merch drop?
Working on some new designs, hopefully by mid summer 🤘
Where's that nephew of mine? Was he hiding .. LOL
I hope you guys put a ride along seat in the back so I can get a ride❤ for real Amen brothers 🙏 amazing work guys later
Where is the man motor ? Doing all this work might as well .
Brrrrrpppppp