jolliCube - 8x8x8 LED Cube Assembly Part 1
Вставка
- Опубліковано 6 жов 2024
- jolliFactory have designed a single color 8x8x8 LED Cube aptly named jolliCube. It is designed for entry level hobbyist who wants to take on the challenge to build a bigger cube rather than settle for a 4x4x4 or 5x5x5 LED cube.
This video is part 1 of 2 for the assembly of the LED Cube.
You may check out jolliCube in action at • jolliCube - 8x8x8 LED ...
You may check out our Instructables for more detail at www.instructabl...
Best Tutorial of „how to solder the LED’s from LED Cube 8x8x8 - best way “ i have seen so far. Great Job man! 3:02 the idea with rubberband and Stick is great! Thanks sir! 😜👍
Great Job of constructing a LED 8x8x8 cube have failed in the past but your step by step instructions are the best I have seen so far will try your method as soon as I replace the LEDs I have damaged Thank you for sharing
+Tibor Siposs
Thanks for the compliment.
This is the first 8x8x8 LED Cube we designed after reviewing what others have come up with. Hope you can share with your friends who may be interested in our LED cube kit set. It is available at www.tindie.com/products/Nick64/jollicube-8x8x8-led-cube-spi-diy-kit/
+Tibor Siposs this cube is here www.ielectronicparts.com/product-category/do-it-youself/
3:02 Great idea with the stick and rubberband !
Wow that's for really patient and precise people! great job!
You're so smart how you construct this you MUST be a perfectionist, huh? 😉
This is a straight to task tutorial. and I absolutely thank you for that.
I have one question though. If I were to take pride in building this led cube by myself, does 3d filament hold against soldering?
7:48 there were column legs that didn't get soldered, 3rd row from bottom, 4th and 5th column from left. Can see them wiggle.
Yes. You are very sharp. We re-soldered these LED legs off the scene when we realised that the soldering points were not good before we proceed to the next step.
Gcvbnm
Interesting Design!.
this is an ultimate idea for making 3d hologram
vert Nice job
nice and organized work but, do you expect how much current a 512 LED's would consume ? .. by simple calculation these 512 leds will need at least 10 Amperes !
We have been using only a 5V, 1.5A power adapter to power the Arduino Nano and LED cube as our design is based on the awesome MAX7219 IC to drive the cube.
At 2:00 : how is that jig staying in place so solidly? Sorcery? Invisible spikes?
Hey m8, what material is the jig? just cardboard?
wow so cool i like video 😉😉😉
They should make VR tv blocks !
Most satisfy vdo thnk u😊
Hey Nick.. Great Job constructing this amazing 8x8x8 LED cube. I am going to make one this summer. I have a quick question.
1) Is Cathode the Negative End of the LED?
2) Can you Tell me the Dimension between the LED's.
3) At the Start of the Video, U r Soldering the Negative End of the LED rite?
+Jai Patel
Thanks for the compliment.
The following are the answers to your questions:
1) Yes.
2) 18mm apart between the LEDs.
3) Yes.
Hi, I just bought your kit & assembled my first plane of these LEDs. I went ahead & wired through about 8:30, but didn't have a multimeter that would send enough power to turn on LEDs. I bought a bench power supply, thinking this might do the trick, but still am unsure how to properly get the same light-by-light check you're getting at 8:30. When I set my power supply to 3v, 0.02a, I can light up a single LED that hasn't been soldered, but when I move to the square of LEDs and test, I see the voltage value drop to 0 and I don't see anything light up. Continuity tester beeps over same connections, so I assume this means my wiring is proper, but am I interpreting this right? Thx for the advice & sorry for n00b question.
We will try to reach out to you via email as we may need you to send us photos and short video clips in order to help you.
I need to know a few things here , What size dowel rod is that how far apart did you make your notches ?for Jig #1
and what are Jig#2-3 made from ? How wide and long and thickness of each one ?
Details on this project is available at www.instructables.com/id/JolliCube-an-8x8x8-LED-Cube-SPI/. You may check out Step 3 for answers to your questions.
Very good
nyce budy I love this
Www.seare.digin
Do you sell this Jig? Any information how to make one?
We sell the LED Cube kit set with option to purchase jig #4 (3mm 8x8 holes) at www.tindie.com/products/Nick64/jollicube---8x8x8-led-cube-spi-diy-kit/.
Visit the following link for more information to assemble the kit set as well as building the jigs required - www.instructables.com/id/JolliCube-an-8x8x8-LED-Cube-SPI/
Gostaria de saber aonde eu consigo comprar um kit desse cubo de led.
Obrigado
nice yaar kafi mast he
How are you keeping the anode and the cathode from touching?
he uses the plastic layed on the jig to bend one of the legs higher so the bottom one doesnt touch the top
Very nice - now I HAVE LEARNED HOW SOLDERING FILIGRAN wires ! A REALLY VERY VERY INTERESTING WORK.
The lightning itself, that is not interesting, Why it should ? No, *soldering* is it , of course !
It would have been much more cheaper, - instead of these LED 's - to use thumbtack 's , such with 2 needles - and then 100 pieces, for soldering about 20 minutes , *that* would have been _much more exciting and maximum informative_ , doesn't it ?
.
I just see you put the first one fold to the other one sorry to ask which one fold
Are you soldering the tips of the wires or more behind the LED? It's hard to tell the details in the video and when I'm doing the kit I bought from you, I feel like I'm not soldering in the same places...
You may solder the wire to any where along that particular horizontal row of connected LED legs. We solder the wires a little away from the LED and hide the wires along the vertical columns of LED legs to the PCB below.
Thank you! Do you trim any excess wire?
Yes.
can i get a simple code in arduino to display a cube inside it of 6x6x6?
Thanks nick jim When next phase will come ?
Do you mean part 2? If so, you may find it at ua-cam.com/video/DwXHiIfSsoc/v-deo.html.
Check out our instructables at www.instructables.com/id/JolliCube-an-8x8x8-LED-Cube-SPI/ for detail.
awesome
Boa noite estou precisando de ajuda, como fazer uma iluminação para uma maquete usando 250 leds ligado na rede elétrica 110 volts, dividir em 4 circuitos 1 e 2 andares 2 para os quintais, me ajuda por favor esse trabalho é para o meu TCC.
hii,
as per your instructables tutorial I did it, but I want to do big, I.e 16x16x16. for that could you please provide circuit diagram.
hello , i guess you need resistors . Don't you think so ?
There is no need for current limiting resistors for our jolliCube design as we are using the MAX7219 ICs to drive the LEDs.
from where i can buy some led;s for a project like this ? but to not be so expensive
So which one is fold over
Did you make normal LED become diffused LED?
thank you
No. We use diffused LEDs.
why you cut the legs of first row of led????
You may check out our Instructables for more detail at www.instructables.com/id/Jolli...
nice bro
do you NEED arduino for this? And also, do you get the wooden template in the kit?
Yes, you may use an Arduino board to drive this cube. You may visit www.instructables.com/id/JolliCube-an-8x8x8-LED-Cube-SPI/ for more detail on the project. The LED Cube kit set is available with option to purchase the jig #4 (3mm 8x8 holes) at www.tindie.com/products/Nick64/jollicube---8x8x8-led-cube-spi-diy-kit/.
but i don't have arduino :( is there a non-arduino version?
nice
ابداع
What is the led cathode wire guys, help me
J' ai acheter ce cube mais il est impossible de le monter car il ne y a pas la nomenclature des composants c'est ce que quelqu un pourrait m aider à il vous plait
I don't understand the whole thing is moving to fast and no one is speaking to explain it slowly for a new b
M
Kick ass!
which legs of led's is cut
You may check out our Instructables for more detail at www.instructables.com/id/Jolli...
hi what is the distance between each hole?? thakns
18mm apart.
wow
Rahul Chowdhury
How thick are jig #2 and jig #3?
They are around 1.5mm thick.
Hey i buy you the cube !
hi what is distance between each hole
They are 18mm apart.
hi
Donde venden la. soldadora.
Had to turn the volume all the way down. Pretty annoying music!
please or send karo
i need code.
jolicube aap bol ke batae samaj ni aaya
طيب وش الفايده منه (:؟
Sarah. نفس الفائدة منك 😊😊
Elmir
re
9
no asepto
Namazlı
M
A complete waste of leds
mu
rsyhil
wow